The most well-known and widely used non-traditional manufacturing method is electrical discharge machining (EDM). It is well-known for its ability to cut rigid materials and high-temperature alloys that are difficult to machine with traditional methods. The significant challenges encountered in EDM are high tool wear rate, low material removal rate, and high surface roughness caused by the continuous electric spark generated between the tool and the workpiece. Researchers have reported using a variety of approaches to overcome this challenge, such as combining the die-sinking EDM process with cryogenic treatment, cryogenic cooling, powder-mixed processing, ultrasonic assistance, and other methods. This paper examines the results of these association techniques on various performance measures, such as material removal rate (MRR), tool wear rate (TWR), surface roughness, surface integrity, and recast layer formed during machining, and identifies potential gap areas and proposes a solution. The manuscript is useful for improving performance and introducing new resolutions to the field of EDM machining.
Engineers continue to be concerned about electrical discharge-machined components’ high energy consumption, machining debris, and poor dimensional precision. The aim of this research is to propose a hybrid neuro-genetic approach to improve the machinability of the electrical discharge machining (EDM) of the Nimonic C263 superalloy. This approach focuses on reducing the energy consumption and negative environmental impacts. The material removal rate (MRR), electrode wear ratio (EWR), specific energy consumption (SEC), surface roughness (Ra), machining debris (db), and circularity (C) are examined as a function of machining parameters such as the voltage (V), pulse on time (Ton), current (I), duty factor (τ), and electrode type. By employing the VIKOR method, all the responses are transformed into a distinctive VIKOR index (VI). Neuro-genetic methods (a hybrid VIKOR-based ANN-GA) can further enhance the best possible result from the VIKOR index. During this step, the hybrid technique (VIKOR-based ANN-GA) is used to estimate an overall improvement of 9.87% in the response, and an experiment is conducted to confirm this condition of optimal machining. This work is competent enough to provide aeroengineers with an energy-efficient, satisfying workplace by lowering the machining costs and increasing productivity.