In this work, Ni₃V₂O₈ (NVO) and Ni₃V₂O₈-reduced graphene oxide (NVO-rGO) are synthesized hydrothermally, and their extensive structural, morphological, and electrochemical characterizations follow subsequently. The synthetic materials’ crystalline structure was confirmed by X-ray diffraction (XRD), and its unique marigold-like morphology was observed by field emission scanning electron microscopy (FESEM). The chemical states of the elements were investigated via X-ray photoelectron spectroscopy (XPS). Electrochemical impedance spectroscopy (EIS), Galvanostatic charge–discharge (GCD), and cyclic voltammetry (CV) were used to assess the electrochemical performance. A specific capacitance of 132 F/g, an energy density of 5.04 Wh/kg, and a power density of 187 W/kg were demonstrated by Ni₃V₂O₈-rGO. Key electrochemical characteristics were b = 0.67; a transfer coefficient of 0.52; a standard rate constant of 6.07 × 10⁻⁵ cm/S; a diffusion coefficient of 5.27 × 10⁻⁸ cm²/S; and a series resistance of 1.65 Ω. By employing Ni₃V₂O₈-rGO and activated carbon, an asymmetric supercapacitor with a specific capacitance of 7.85 F/g, an energy density of 3.52 Wh/kg, and a power density of 225 W/kg was achieved. The series resistance increased from 4.27 Ω to 6.63 Ω during cyclic stability tests, which showed 99% columbic efficiency and 87% energy retention. The potential of Ni₃V₂O₈-rGO as a high-performance electrode material for supercapacitors is highlighted by these findings.

In the present study, self-assembled hierarchical CoMn-LDH, CoMn@CuZnS, and CoMn@CuZnFeS heterostructured composites were synthesized for bifunctional applications. As an electrode for a supercapacitor, CoMn-LDH demonstrated superior areal and specific capacitance of 5.323 F cm⁻² (279.49 mAh/g) at 4 mA cm⁻², comparable to or even higher than other LDHs. The assembled AC//CoMn-LDH hybrid supercapacitor device further demonstrated better stability with 63% original capacitance over 20,000 cycles. Later, as a catalyst, CoMn-LDH, CoMn@CuZnS, and CoMn@CuZnFeS electrodes revealed better performance, with overpotentials of 340, 350, and 366 and −199, −215, and −222 mV to attain 10 mA cm⁻² of current density for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. Moreover, for CoMn-LDH, small Tafel slopes of 102 and 128 mV/dec were noticed for OER and HER with good stability compared to heterostructured electrodes.

Electrochromic materials allow for precise control of their optical properties by applying an electric field, which has led to recent developments in energy-saving and indoor temperature control systems like smart windows. The selective incorporation of metal dopants is an effective technique for generating highly advanced semiconducting metal oxides with precisely customized physicochemical characteristics. In this report, we employed a one-step electrodeposition process to fabricate nickel-doped tungsten oxide (W–Ni) thin films, systematically probing the impact of nickel (Ni) doping on the collective material characteristics. Comprehensive X-ray diffraction research revealed significant changes in diffraction patterns, suggesting slight modifications in the structure caused by Ni doping. The scanning electron microscopy showed complex differences in the microstructure of the film, such as a dense surface, porosity, and clustering of nanogranules. The WNi-3% thin film doped at 3 wt. % exhibited excellent electrochromic performance by efficiently handling lithium ions and displaying favorable electrochromic properties. The improved electrode, WNi-3%, showed a maximum optical modulation of 81.90%, exceptional reversibility of 99.4%, and a high coloration efficiency of 75.12 cm²/C. These findings underscore the efficacy of Ni-doping in tailoring the electrochromic properties of nickel-doped tungsten oxide thin films, thereby advancing the frontiers of high-performance electrochromic materials for energy-efficient applications.

The rational design of transition metal oxides with tailored electronic structures and defect chemistries is critical for advancing high-performance supercapacitors. Herein, we report the engineering of cobalt oxide (Co₃O₄) gels through controlled sol–gel synthesis and rare earth (RE) incorporation using neodymium (Nd), gadolinium (Gd), and dual neodymium/gadolinium (Nd/Gd) doping. X-ray diffraction (XRD) confirmed the preservation of the cubic spinel structure with systematic peak shifts and broadening, evidencing lattice strain, oxygen vacancy generation, and defect enrichment. Field-emission scanning electron microscopy (FE-SEM) analyses revealed distinct morphological evolution from compact nanoparticle assemblies in pristine Co₃O₄ to highly porous, interconnected frameworks in Nd/Gd–Co₃O₄ (Nd/Gd-Co). X-ray photoelectron spectroscopy (XPS) verified the stable incorporation of RE ions, accompanied by electronic interaction with the Co–O matrix and enhanced oxygen defect states. Electrochemical measurements demonstrated that the Nd/Gd–Co electrode achieved a remarkable areal capacitance of 25 F/cm² at 8 mA/cm², superior ionic diffusion coefficients, and the lowest equivalent series resistance (0.26 Ω) among all samples. Long-term cycling confirmed 84.35% capacitance retention with 94.46% coulombic efficiency after 12,000 cycles. Furthermore, the asymmetric pouch-type supercapacitor (APSD) constructed with Nd/Gd–Co as the positive electrode and activated carbon as the negative electrode delivered a wide operational window of 1.5 V, an areal capacitance of 140 mF/cm², an energy density of 0.044 mWh/cm², and 89.44% retention after 7000 cycles. These findings establish Nd/Gd-Co gels as robust and scalable electrode materials and demonstrate that RE co-doping is an effective strategy for bridging high energy density with long-term electrochemical stability in asymmetric supercapacitors.