Caili Wang

Dr. Caili Wang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2020 in Materials
Verified
Journal Article
Open access
PDF file
CWCaili Wang
Caili Wang
RYRunquan Yang
Runquan Yang
WHWang Huaifa
Wang Huaifa
In this study, fly ash (FA) coated with ZIF-8 (ZIF-8/FA) nanocomposite was first synthesized by taking 2-methylimidazole and zinc nitrate hexahydrate as reactants and then used as an adsorbent for adsorption of copper, zinc, and nickel ions from aqueous solution. The characteristic of FA and ZIF-8/FA samples were analyzed based on the data from scanning electronic microscopy (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, grain size analyzer and N2 adsorption-desorption isotherm. The results showed that ZIF-8 deposited on the FA evenly. The average crystallite size of ZIF-8 on the surface of FA is 15.85 nm. The specific surface area of FA was increased from 1.8 to 249.5 m2/g. The adsorption efficiency of the ZIF-8/FA nanocomposite for the removal of heavy metal ions from aqueous solution was optimized in terms of different parameters such as pH, adsorbent dosage, and contact time. It was shown that the saturated adsorption amounts of the obtained composite for adsorption of Cu2+, Zn2+, and Ni2+ are 335, 197, and 93 mg·g−1. ZIF-8/FA had better stability and more mesoporous volume than that of ZIF-8 and exhibited higher rate for adsorption of heavy metal ions from aqueous solution than FA and ZIF-8, suggesting an adsorption synergy between ZIF-8 and FA. The adsorption mechanism of heavy metal ions by ZIF-8/FA includes surface adsorption, pore adsorption, and ion exchange. The obtained ZIF-8/FA nanocomposite can solve the encountered problems of FA for low adsorption and the difficult recycling of ZIF-8 for their small size, high cost, and poor stability.

16 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
CWCaili Wang
Caili Wang
JWJing Wang
Jing Wang
SWShaobin Wang
Shaobin Wang
RYRunquan Yang
Runquan Yang
WHWang Huaifa
Wang Huaifa
A magnesium hydroxide (MH)-modified calcined fly ash (CFA) nanocomposite (CFAMH) with core-shell structure was obtained with a heterogeneous nucleation method, and its application for removal of copper, zinc and nickel ions from aqueous acidic solution was studied. The microstructure and surface properties of CFA, CFAMH and MH powders were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller specific surface area (BET), X-ray diffraction (XRD) and Fourier translation infrared spectroscopy (FTIR), respectively. The preparation mechanism of CFAMH was discussed based on zeta potential and FTIR data. The results showed that nano-flake MH with thickness 13.4 nm was well coated on the surface of CFA. The specific surface area was increased from 2.5 to 31.0 m2/g. Si-O-Mg-OH bonds formed from the condensation of Si-OH and Mg-OH. The removal efficiency of heavy metals on CFAMH nanocomposite is higher than that of CFA and MH and follows an order of Cu2+ > Zn2+ > Ni2+. Solubility product constant (Ksp) is an important constant for the removal order of heavy metals on FA, CFAMH and MH. CFAMH nanocomposite can be a cheap material for removing heavy metal ions from acidic wastewater.

8 July 2019 in Minerals
Verified
Journal Article
Open access
PDF file
LSLi Shuai
Li Shuai
JZJie Zhang
Jie Zhang
WHWang Huaifa
Wang Huaifa
CWCaili Wang
Caili Wang
In order to provide a good theoretical guidance for the development and utilization of weathered phosphorite resources, we investigated the geochemical and mineralogical characteristics of primary and weathered phosphorites. The analysis of trace elements showed that the primary ore has hydrothermal sedimentation effect in the later stage, the weathered ore has obvious residual enrichment and the phosphate ore belongs to clastic lithologic phosphate rock. In addition, through leaching test method, it was shown that rare earth elements are present in fluorapatite in the form of isomorphic substitution, and the proportion of rare earth elements adsorbed on clay and other minerals was likely to be between 2% and 3%. The light rare earth elements are relatively enriched in both primary and weathered phosphorite, and Ce and Eu have obvious negative anomalies. The primary phosphorite is a dolomitic phosphorite containing rare earth elements, which are naturally enriched by weathering, and its weathered ore has obvious residual enrichment, while the deposit was characterized by normal marine sedimentation and hydrothermal action.


24 August 2022 in Science of The Total Environment
Verified
Journal Article
Closed access
Xiaowei LouXiaowei Lou
Xiaowei Lou
PZPing Zhang
Ping Zhang
NSNan Shi
Nan Shi
ZDZhe Ding
Zhe Ding
ZXZhong-Gao Xu
Zhong-Gao Xu
JCJianghua Chen
Jianghua Chen

3 March 2024 in Materials
Verified
Journal Article
Open access
PDF file
YQYing Qiu
Ying Qiu
CWCaili Wang
Caili Wang
CZChunxue Zhao
Chunxue Zhao
GYGuoxin Yao
Guoxin Yao
ZWZhixue Wang
Zhixue Wang
RYRunquan Yang
Runquan Yang
As a common coal-based solid waste, fly ash is widely used in material filling. However, due to the high resistivity of fly ash itself, the antistatic performance of the filling material is poor. Therefore, antistatic composite powder was prepared by coating nano-sized antimony-doped tin oxide (ATO) on the surface of fly ash, and its preparation mechanism was discussed. The composite powders were characterized by SEM, EDS, XRD and FTIR. The results show that the interaction between SiO2 and SnO2 appears at the wave number of 727.12 cm−1, and the obvious SnO2 crystal phase appears on the surface of fly ash. The volume resistivity of calcined fly ash is 1.72 × 1012 Ω·cm, and the volume resistivity of ATO fly ash is reduced to 6 × 103 Ω·cm. By analyzing the limiting oxygen index, melt index, tensile strength, elongation at break, cross-section morphology and surface electrical resistivity of EVA, it was found that the addition of antistatic powder to EVA can improve its antistatic performance without deteriorating the mechanical properties of EVA.