Li Shuai

Dr. Li Shuai

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2022 in ACS Omega
Verified
Journal Article
Open access
LSLi Shuai
Li Shuai
RYRunquan Yang
Runquan Yang
CWCaili Wang
Caili Wang
HHHua Han
Hua Han
SSShiyu Shen
Shiyu Shen
WHWang Huaifa
Wang Huaifa
The bubble size distribution, location distribution, and gas holdup in a gas–liquid–solid flow three-phase stirred tank were numerically simulated by the Eulerian–Eulerian method and the population balance model (PBM). The Euler–Euler method combined with the PBM model included the influence of bubble aggregation and fragmentation on the interfacial force, which can better predict the bubble size distribution and phase holdups. The simulation results show that there are some differences in the fluid morphology and gas dispersion characteristics in the stirred tank under different rotating speeds. With the increase of rotating speed, the content of small-diameter bubbles increases obviously, and they are mainly concentrated in areas with higher speeds. The higher the rotational speed, the more the bubbles with small diameters, but the content of bubbles with large diameters is less affected by the rotational speed. Small-size bubbles mainly exist in the region of high fluid velocity, while large-size bubbles mainly exist in the region of low hydrostatic pressure. Compared with the change of the bubble content at different speeds, the content of bubbles with diameters of 0.50–1.90 mm is largest at 2000 rpm, while the content of bubbles with diameters of 2.65–10.09 mm is largest at 1500 rpm. The simulation work has certain guiding significance for the research and development of the forced mineralization device and the understanding of the dispersion characteristics of bubbles in the stirred tank.


17 January 2022 in Particulate Science and Technology
Verified
Journal Article
Closed access
LSLi Shuai
Li Shuai
YRYang Runquan
Yang Runquan
WCWang Caili
Wang Caili
SYShen Yang
Shen Yang
WHWang Huaifa
Wang Huaifa
The computational fluid dynamics-discrete element coupling method is used to simulate the suspension behavior of solid particles in a stirred tank, and the motion trajectories and collision motions of millions of particles are analyzed. These particles have complex interactions with the liquid and the rotating impeller. In this article, we introduce a slip grid method, which is an important method to realize the CFD-DEM coupling. We discuss the influence of liquid flow on the trajectory of solid particles, and analyze the relationship between the eight physical properties of solid particles. It can be concluded that the CFD-DEM coupled approach provides a theoretical way to understand the physics of particle movement in micro- to macro-scales in the solid suspension of a stirred tank.

8 July 2019 in Minerals
Verified
Journal Article
Open access
PDF file
LSLi Shuai
Li Shuai
JZJie Zhang
Jie Zhang
WHWang Huaifa
Wang Huaifa
CWCaili Wang
Caili Wang
In order to provide a good theoretical guidance for the development and utilization of weathered phosphorite resources, we investigated the geochemical and mineralogical characteristics of primary and weathered phosphorites. The analysis of trace elements showed that the primary ore has hydrothermal sedimentation effect in the later stage, the weathered ore has obvious residual enrichment and the phosphate ore belongs to clastic lithologic phosphate rock. In addition, through leaching test method, it was shown that rare earth elements are present in fluorapatite in the form of isomorphic substitution, and the proportion of rare earth elements adsorbed on clay and other minerals was likely to be between 2% and 3%. The light rare earth elements are relatively enriched in both primary and weathered phosphorite, and Ce and Eu have obvious negative anomalies. The primary phosphorite is a dolomitic phosphorite containing rare earth elements, which are naturally enriched by weathering, and its weathered ore has obvious residual enrichment, while the deposit was characterized by normal marine sedimentation and hydrothermal action.

26 August 2024 in ACS Omega
Verified
Journal Article
Open access
SXShaomei Xu
Shaomei Xu
XLXiangyu Lu
Xiangyu Lu
ZDZhifei Dai
Zhifei Dai
LSLi Shuai
Li Shuai
GXGang Xiao
Gang Xiao
YHYangyang Huai
Yangyang Huai
Chalcopyrite is a primary source of copper in nature. However, with the increasing need to process low-grade and complex chalcopyrite ores, overly stable froth is becoming more and more common and poses operational and safety challenges. No reliable strategy has been developed to address the issue. As a new initiative, this study investigated three different structured surfactants, sodium dodecyl sulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), and pentadecafluorooctanoic acid (PFOA), which vary in hydrophobic group, aiming to modify the surfaces of ultrafine chalcopyrite particles and adjust the interfacial tension at the gas-liquid interface to eliminate stable ultrafine chalcopyrite froth. The fundamental hypothesis was that an ideal surfactant structure could adjust the particle surface wettability and interfacial tension to eliminate overly stable froth. Based on contact angle measurements and interfacial tension measurements using a Theta Flow tensiometer by the pendant drop method and the sessile drop method, it was demonstrated that the contact angle played a dominant role in defoaming, while the reduction of gas-liquid interfacial tension had an adverse effect. Additionally, defoaming tests indicated that SDBS had lower defoaming effectiveness than SDS at low surfactant concentrations due to the steric hindrance in its structure, whereas the addition of SDBS could achieve a froth reduction efficiency as high as 93.75% at higher surfactant concentrations due to its stronger hydrophobicity and adsorption capacity to chalcopyrite particles, which could reduce the contact angle from 70 to 37.62 degrees. However, PFOA exhibited lower defoaming effectiveness than both SDS and SDBS due to its lipophobic fluorocarbon tail of PFOA and weaker adsorption capacity to chalcopyrite particles, making it unsuitable for eliminating stable ultrafine chalcopyrite froth.

9 October 2024 in ACS Omega
Verified
Journal Article
Open access
LSLi Shuai
Li Shuai
TPTiefeng Peng
Tiefeng Peng
SXShaomei Xu
Shaomei Xu
YQYoujie Qiu
Youjie Qiu
YHYangyang Huai
Yangyang Huai
To improve the froth breakdown performance of flotation foam, a mechanical defoaming device based on vacuum and rotation was developed. The device is mainly composed of a rotating disk and a baffle and generates negative pressure when rotating at high speed. Through the synergistic effects of negative pressure, collision, extrusion, and shearing, the flotation foam effectively separates the liquid and gas phases. The flow field characteristics of the defoaming device are meticulously analyzed through numerical simulation, leading to a comprehensive evaluation of its defoaming performance. The effects of different rotational speeds on fluid velocity, pressure, turbulence, and traces are studied. It can be obtained that when the rotational speed is 900–1800 rpm, the device generates a pressure zone of −2.5 to −12.5 kPa, which can meet the requirements of the defoaming design.