The adoption of high-density electrode systems for human–machine interfaces in real-life applications has been impeded by practical and technical challenges, including noise interference, motion artefacts and the lack of compact electrode interfaces. To overcome some of these challenges, we introduce a wearable and stretchable electromyography (EMG) array, and present its design, fabrication methodology, characterisation, and comprehensive evaluation. Our proposed solution comprises dry-electrodes on flexible printed circuit board (PCB) substrates, eliminating the need for time-consuming skin preparation. The proposed fabrication method allows the manufacturing of stretchable sleeves, with consistent and standardised coverage across subjects. We thoroughly tested our developed prototype, evaluating its potential for application in both research and real-world environments. The results of our study showed that the developed stretchable array matches or outperforms traditional EMG grids and holds promise in furthering the real-world translation of high-density EMG for human–machine interfaces.
3 January 2020 in IEEE Robotics and Automation Letters
Soft wearable robots represent a promising new design paradigm for rehabilitation and active assistance applications. Their compliant nature makes them ideal for complex joints, but intuitive control of these robots require robust and compliant sensing mechanisms. In this work, we introduce the sensing framework for a multiple degrees-of-freedom shoulder exosuit capable of sensing the kinematics of the joint. The proposed sensing system is inspired by the body's embodied kinematic sensing, and the organisation of muscles and muscle synergies responsible for shoulder movements. A motion-capture-based evaluation study of the developed framework confirmed conformance with the behaviour of the muscles that inspired its routing. This validation of the tendon-routing hypothesis allows for it to be extended to the actuation framework of the exosuit in the future. The sensor-to-joint-space mapping is based on multivariate multiple regression and derived using an Artificial Neural Network. Evaluation of the derived mapping achieved root mean square error of ≈5.43° and ≃3.65° for the azimuth and elevation joint angles measured over 29,500 frames (4+ minutes) of motion-capture data.
Space poses substantial challenges for humans, leading to physiological adaptations in response to an environment vastly different from Earth. A comprehensive understanding of these physiological adaptations is necessary to develop effective countermeasures that support human life in space. This narrative review first focuses on the impact of the space environment on the musculoskeletal system. It highlights the complex interplay between bone and muscle adaptations and their implications on astronaut health. Despite advances in current countermeasures, such as resistive exercise and pharmacological interventions, they remain partially effective, bulky, and resource-intensive, posing challenges for future missions aboard compact spacecraft. This review proposes wearable sensing and robotic technologies as promising alternatives to overcome these limitations. Wearable systems, such as sensor-integrated suits and (soft) exoskeletons, can provide real-time monitoring, dynamic loading, and exercise protocols tailored to individual needs. These systems are lightweight, modular, and capable of operating in confined environments, making them ideal for long-duration missions. In addition to space applications, wearable technologies hold considerable promise for terrestrial uses. They could support rehabilitation and assistance for the aging population and individuals with musculoskeletal disorders, and enhance physical performance in healthy users. By integrating advanced materials, sensors, actuators, and intelligent, energy-efficient control, these technologies can bridge gaps in current countermeasures while enabling broader applications on Earth.
Loss of hand function after spinal cord injury (SCI) significantly impairs independence and quality of life. Although residual muscle activity recorded on the skin can provide intuitive control signals, it is limited in SCI by low amplitude, and poor signal-to-noise ratio. Here, we show that these key limitations can be overcome by implanting 40-channel microelectrode arrays directly into forearm muscles. Using blind source separation methods, we detected the simultaneous activity of up to 73 spinal motoneurons during attempted movements of two tetraplegic individuals with SCI. Even in the presence of spasticity or complete paralysis, participants could modulate the activity of individual motoneurons to accurately control a computer cursor in one and two dimensions, play a video game, and even regain the ability to grasp using a motoneuron-controlled soft exoskeleton glove. Our findings demonstrate the feasibility of an implantable microelectrode array system that uses residual motoneuron activity for control in SCI, with the potential to improve the quality of life for individuals with paralysis.
The compliant nature of soft wearable robots makes them ideal for complex multiple degrees of freedom (DoF) joints, but also introduce additional structural nonlinearities. Intuitive control of these wearable robots requires robust sensing to overcome the inherent nonlinearities. This paper presents a joint kinematics estimator for a bio-inspired multi-DoF shoulder exosuit capable of compensating the encountered nonlinearities. To overcome the nonlinearities and hysteresis inherent to the soft and compliant nature of the suit, we developed a deep learning-based method to map the sensor data to the joint space. The experimental results show that the new learning-based framework outperforms recent state-of-the-art methods by a large margin while achieving 12ms inference time using only a GPU-based edge-computing device. The effectiveness of our combined exosuit and learning framework is demonstrated through real-time teleoperation with a simulated NAO humanoid robot.
Soft wearable robots are a promising new design paradigm for rehabilitation and active assistance applications. Their compliant nature makes them ideal for complex joints like the shoulder, but intuitive control of these robots require robust and compliant sensing mechanisms. In this work, we introduce the sensing framework for a multi-DoF shoulder exosuit capable of sensing the kinematics of the shoulder joint. The proposed tendon-based sensing system is inspired by the concept of muscle synergies, the body's sense of proprioception, and finds its basis in the organization of the muscles responsible for shoulder movements. A motion-capture-based evaluation of the developed sensing system showed conformance to the behaviour exhibited by the muscles that inspired its routing and validates the hypothesis of the tendon-routing to be extended to the actuation framework of the exosuit in the future. The mapping from multi-sensor space to joint space is a multivariate multiple regression problem and was derived using an Artificial Neural Network (ANN). The sensing framework was tested with a motion-tracking system and achieved performance with root mean square error (RMSE) of approximately 5.43 degrees and 3.65 degrees for the azimuth and elevation joint angles, respectively, measured over 29000 frames (4+ minutes) of motion-capture data.