Fixed-wing Vertical Takeoff and Landing (VTOL) drones have been widely researched and applied because they combine the advantages of both rotorcraft and fixed-wing drones. However, the research on the transition mode of this type of drone has mainly focused on completing the process quickly and stably, and the application potential of this mode has not been given much attention. The objective of this paper is to routinize the transition mode of compound VTOL drones, i.e., this mode works continuously for a longer period of time as a third commonly used mode besides multi-rotor and fixed-wing modes, which is referred to as the hybrid mode. For this purpose, we perform detailed dynamics modeling of the drone in this mode and use saturated PID controllers to control the altitude, velocity, and attitude of the drone. In addition, for more stable altitude control in hybrid mode, we identify the relevant parameters for the lift of the fixed-wings and the thrust of the actuators. Simulation and experimental results show that the designed control method can effectively control the compound VTOL drone in hybrid mode. Moreover, it is proven that flight in hybrid mode can reduce the flight energy consumption to some extent.
The distributed electric propulsion (DEP) vertical take-off and landing (VTOL) drone has the characteristics of both rotary-wing and fixed-wing aircraft. The dynamic model of its take-off and landing stage is similar to that of the multirotors. However, its large span makes it more susceptible to exogenous disturbances. Therefore, this paper leverages a modified uncertainty and disturbance estimator (MUDE) to dynamically estimate and compensate for the disturbance so that this type of drone has a relatively stable attitude motion in its VTOL stage. Considering the actuators of the drone in real flight are non-ideal, the motor dynamics is introduced into the controller design, its model is described as a first-order pulse with dead time (FOPDT) and the parameter was identified using a thrust test platform. In addition, the cascade general inverse (CGI) method is utilized to deal with the problem of actuator saturation in the control allocation for its asymmetrical layout. In order to verify the designed controller and control allocation algorithm, a small-scale asymmetrical hexacopter prototype was built, then the rotary platform experiments were carried out to fully exploit the attitude tracking performance of the proposed controller. A real flight test was also carried out to test the feasibility of the method. The experimental results show that the MUDE-based controller combined with the CGI control allocation scheme for our hexarotor prototype achieves accurate attitude tracking results under random exogenous disturbance.