This paper presents a study about the integration of Piezoelectric Energy Harvesting Systems (PE-EHSs) into building envelopes for powering Fiber Bragg Grating (FBG) sensors, enabling efficient and low-consumption monitoring with the objective of leveraging structural health monitoring (SHM). The research includes preliminary tests conducted in a real environment to validate the PE-EHS when fully integrated into a ventilated façade, capturing mechanical vibrations generated mainly by wind loads. Based on these activities, the final configuration of PE-EHSs is defined to provide a complete system for façade monitoring. This integrated system includes the piezoelectric generator (PEG), supercapacitor (SC), Power Conditioner Circuit (PCC), Fiber Optic Sensing (FOS) interrogator, and the IoT gateway transmitting measurement data within an Internet of Things (IoT) monitoring platform. This configuration is tailored to address the challenges related to the structural integrity of building envelopes. Results demonstrate a potential for a stand-alone solution in the façade sector but raise issues for certain limitations, requiring further investigation. In particular, the study emphasizes constraints related to the energy production of PE-EHSs for façade integration. It highlights the necessity to carefully consider these limitations within the broader context of their applicability, providing insights for the informed deployment of piezoelectric energy harvesting technology in building envelope monitoring.

The increasing environmental concerns surrounding plastic waste have intensified recycling efforts, particularly in the textile industry, where poly(ethylene terephthalate) (PET) is widely used for sustainable material production. The growing use of recycled PET (rPET) in textiles has prompted the need for reliable analytical methods to detect and quantify rPET content. This study differentiates between virgin and recycled PET by simulating mechanical recycling through five reprocessing cycles of three distinct PET grades, assessing changes in crystalline structure, intrinsic viscosity, molecular weight, and specific degradation markers. Differential Scanning Calorimetry revealed bimodal melting behaviour in reprocessed samples, while intrinsic viscosity and Gel Permeation Chromatography indicated molecular degradation. Notably, the release of dimethyl terephthalate (DMT) and dimethyl isophthalate (DMiP) was consistently observed as a function of degradation. These markers were identified and quantified using High-Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC), with GC offering higher sensitivity and lower matrix interference. This study demonstrates that DMT and DMiP are robust chemical indicators of PET degradation and recycled content. This analytical approach, combining thermal, rheological, and chromatographic techniques, provides a scientifically sound and potentially cost-effective basis for traceability systems, certification protocols, and regulatory compliance in sustainable textile production.

Soft robotics is an expanding area with multiple applications; however, building low-cost, soft, and flexible robots requires the development of sensors that can be directly integrated into the soft robotics fabrication process. Thus, the motivation for this work was the design of a low-cost fabrication process of flexible sensors that can detect touch and deformation. The fabrication process proposed uses a flexible polymer nanocomposite with permanent magnets strategically placed where the conductive electrodes should be. The nanocomposite is based on poly(dimethylsiloxane) (PDMS) and multi-walled carbon nanotubes (MWCNTs). The MWCNT contains ferromagnetic impurities remaining from the synthesis process, which can be used for magnetic manipulation. Several electrode geometries were successfully simulated and tested. The magnetic patterning was simulated, allowing the fabrication of conductive patterns within the composite. This fabrication process allowed the reduction of the electrical resistivity of the nanocomposites as compared to the composites with homogeneous MWCNT dispersion. It also allowed the fabrication of piezoresistive and triboelectric sensors at MWCNT concentration as low as 0.5 wt.%. The fabrication process proposed is flexible, allows the development of sensors for soft robotics, as well as monitoring large and unconventional areas, and may be adapted to different mould shapes and polymers at low cost.