The fracture behaviour of polymers is strongly affected by the addition of rigid particles. Several features of the particles have a decisive influence on the values of the fracture toughness: shape and size, chemical nature, surface nature, concentration by volume, and orientation. Among those of thermoplastic matrix, polypropylene (PP) composites are the most industrially employed for many different application fields. Here, a review on the fracture behaviour of PP-based particulate composites is carried out, considering the basic topics and experimental techniques of Fracture Mechanics, the mechanisms of deformation and fracture, and values of fracture toughness for different PP composites prepared with different particle scale size, either micrometric or nanometric.
19 November 1999 in Journal of Applied Polymer Science
Microcellular injection moulding is capable of producing lightweight polymeric products. The present study analyses the influence of several representative injection moulding parameters on the foam’s morphology, apparent density and thermo-mechanical properties of PETG, poly(ethylene terephthalate-co-1,4-cyclohexylene-dimethylene terephthalate) specimens. A strong variation of the cell morphology along the melt flow direction has been found, as well as a dependence on the shot volume. The most homogeneous microcellular structure is achieved when low shot volume, intermediate injection speed and low mould temperature are employed. The skin–core structure of the injected parts, determined the thermo-mechanical features of the specimen, which are ruled by the skin layer.
Several commercial grades of homo-polymer and its blends were selected to prepare microporous membranes through melt extrusion-annealing-uniaxial stretching technique (MEAUS). Branched or very fluid polypropylene was employed to modify the polymeric composition. In some blends, micro-sized calcium carbonate was added. We analysed the influence of sample composition, extrusion draw ratio, and we performed a deep study concerning the uniaxial strain rate, using in some cases extreme strain rates and strain extents. The crystalline features were studied by Differential Scanning Calorimetry (DSC), and the morphology of porous structure was analyzed through Scanning Electron Microscopy (SEM). Thermal stability and thermomechanical performance was measured by thermogravimetric analysis (TGA) and dynamic-mechanical-thermal (DTMA) study. A close relationship was found between crystalline characteristics, porous morphology and the trends registered for permeability.