(1) Background: This study aimed to compare the shaping abilities of modern minimally invasive endodontic systems using natural teeth and 3D-printed resin replicas. These replicas offer a standardized approach for studying root canal preparation while eliminating the variability and scarcity of natural teeth. (2) Methods: Eleven mandibular molars with Vertucci class IV anatomy and their 3D-printed replicas (n = 132 canals) were scanned using micro-CT before and after preparation with six rotary systems. Shaping abilities were assessed by comparing volume, surface area, and unprepared areas between natural teeth and their 3D replicas, focusing on the apical third. Statistical analysis included the Shapiro–Wilk test to assess data normality and ANOVA and t-tests to compare different endodontic systems. (3) Results: Both qualitative and quantitative analyses revealed high similarity between natural teeth and 3D replicas. No significant differences in volume or surface area were found except in the apical third, where 3D replicas showed slightly larger increases in volume. (4) Conclusions: 3D resin replicas closely mimic natural teeth and provide a practical tool for assessing the shaping abilities of endodontic systems. This study demonstrates that 3D-printed models are suitable for endodontic research, offering a standardized and accessible alternative to natural teeth.

This study aims to compare the cyclic fatigue resistance of nickel–titanium (NiTi) endodontic instruments, focusing on the impact of various alloy treatments and manufacturing processes across different generations of these instruments; Twenty instrumentation systems from different generations, comprising both continuous and reciprocating motion designs, were tested. Four hundred instruments underwent cyclic fatigue testing using an INSTRON machine, with the time and number of cycles to fracture (NCF) recorded for each instrument. Statistical analyses were performed to compare the fatigue resistance between systems, generations, and motion types; Instruments treated with advanced thermal processing, such as Excalibur, Reciproc Blue, and TruNatomy, demonstrated superior resistance to fracture, whereas systems like Protaper Universal, K3XF, and 2Shape showed the lowest resistance. Reciprocating instruments generally exhibited higher cyclic fatigue resistance than continuously rotating instruments; Technological advancements in NiTi instrument design, especially the implementation of heat-treated alloys, have improved cyclic fatigue resistance, enhancing the safety and efficiency of endodontic treatments. Reciprocating systems, in particular, exhibit superior fracture resistance, suggesting their greater utility in challenging clinical conditions.

This study aimed to analyze the effect of 1% sodium hypochlorite (NaOCl) solution at different temperatures on endodontic file resistance to cyclic fatigue. A total of 90 files, Reciproc NiTi M-Wire^® (REC) (n = 30), WaveOne Gold^® (WOG) (n = 30), and Reciproc Blue^® (RB) (n = 30) were activated under constant irrigation with 1% NaOCl at 5, 37, and 60 °C in a stainless-steel artificial canal (curvature angle = 60°; radius = 5 mm). The time to the fracture and the maximum and minimum load were recorded for each instrument, and data were subjected to statistical analysis. A higher number of cycles to fracture at 5 °C was observed between WOG and RB compared to the REC system (p < 0.05). The RB files were more resistant to cyclic fatigue fracture at 60 °C than WOG and REC (p < 0.05). No statistically significant differences were found between the mean values of the three file types used at 37 °C. The high temperature of NaOCl significantly affects the lifespan of endodontic files, making them more prone to fractures due to cyclic fatigue. The files manufactured with heat treatment showed a longer life than M-wire reciproc files.