The present investigation evaluates the accuracy of estimating above-ground biomass (AGB) by means of two different sensors installed onboard an unmanned aerial vehicle (UAV) platform (DJI Inspire I) because the high costs of very high-resolution imagery provided by satellites or light detection and ranging (LiDAR) sensors often impede AGB estimation and the determination of other vegetation parameters. The sensors utilized included an RGB camera (ZENMUSE X3) and a multispectral camera (Parrot Sequoia), whose images were used for AGB estimation in a natural tropical mountain forest (TMF) in Southern Ecuador. The total area covered by the sensors included 80 ha at lower elevations characterized by a fast-changing topography and different vegetation covers. From the total area, a core study site of 24 ha was selected for AGB calculation, applying two different methods. The first method used the RGB images and applied the structure for motion (SfM) process to generate point clouds for a subsequent individual tree classification. Per the classification at tree level, tree height (H) and diameter at breast height (DBH) could be determined, which are necessary input parameters to calculate AGB (Mg ha⁻¹) by means of a specific allometric equation for wet forests. The second method used the multispectral images to calculate the normalized difference vegetation index (NDVI), which is the basis for AGB estimation applying an equation for tropical evergreen forests. The obtained results were validated against a previous AGB estimation for the same area using LiDAR data. The study found two major results: (i) The NDVI-based AGB estimates obtained by multispectral drone imagery were less accurate due to the saturation effect in dense tropical forests, (ii) the photogrammetric approach using RGB images provided reliable AGB estimates comparable to expensive LiDAR surveys (R²: 0.85). However, the latter is only possible if an auxiliary digital terrain model (DTM) in very high resolution is available because in dense natural forests the terrain surface (DTM) is hardly detectable by passive sensors due to the canopy layer, which impedes ground detection.

A reliable estimation of Above Ground Biomass (AGB) in Tropical Mountain Forest (TMF) is still complicated, due to fast-changing climate and topographic conditions, which modifies the forest structure within fine scales. The variations in vertical and horizontal forest structure are hardly detectable by small field plots, especially in natural TMF due to the high tree diversity and the inaccessibility of remote areas. Therefore, the present approach used remotely sensed data from a Light Detection and Ranging (LiDAR) sensor in combination with field measurements to estimate AGB accurately for a catchment in the Andes of south-eastern Ecuador. From the LiDAR data, information about horizontal and vertical structure of the TMF could be derived and the vegetation at tree level classified, differentiated between the prevailing forest types (ravine forest, ridge forest and Elfin Forest). Furthermore, topographical variables (Topographic Position Index, TPI; Morphometric Protection Index, MPI) were calculated by means of the high-resolution LiDAR data to analyse the AGB distribution within the catchment. The field measurements included different tree parameters of the species present in the plots, which were used to determine the local mean Wood Density (WD) as well as the specific height-diameter relationship to calculate AGB, applying regional scale modelling at tree level. The results confirmed that field plot measurements alone cannot capture completely the forest structure in TMF but in combination with high resolution LiDAR data, applying a classification at tree level, the AGB amount (Mg ha⁻¹) and its distribution in the entire catchment could be estimated adequately (model accuracy at tree level: R² > 0.91). It was found that the AGB distribution is strongly related to ridges and depressions (TPI) and to the protection of the site (MPI), because high AGB was also detected at higher elevations (up to 196.6 Mg ha⁻¹, above 2700 m), if the site is situated in depressions (ravine forest) and protected by the surrounding terrain. In general, highest AGB is stored in the protected ravine TMF parts, also at higher elevations, which could only be detected by means of the remote sensed data in high resolution, because most of these areas are inaccessible. Other vegetation units, present in the study catchment (pasture and subpáramo) do not contain large AGB stocks, which underlines the importance of intact natural forest stands.

Weather radar networks are indispensable tools for forecasting and disaster prevention in industrialized countries. However, they are far less common in the countries of South America, which frequently suffer from an underdeveloped network of meteorological stations. To address this problem in southern Ecuador, this article presents a novel radar network using cost-effective, single-polarization, X-band technology: the RadarNet-Sur. The RadarNet-Sur network is based on three scanning X-band weather radar units that cover approximately 87,000 km2 of southern Ecuador. Several instruments, including five optical disdrometers and two vertically aligned K-band Doppler radar profilers, are used to properly (inter) calibrate the radars. Radar signal processing is a major issue in the high mountains of Ecuador because cost-effective radar technologies typically lack Doppler capabilities. Thus, special procedures were developed for clutter detection and beam blockage correction by integrating ground-based and satelliteborne measurements. To demonstrate practical applications, a map of areas frequently affected by intense rainfall is presented, based on a time series of one radar that has been in operation since 2002. Such information is of vital importance to, for example, infrastructure management because rain-driven landslides are a major issue for road maintenance and safety throughout Ecuador. The presented case study of exceptionally strong rain events during the recent El Niño in March 2015 highlights the system’s practicality in weather forecasting related to disaster management. For the first time, RadarNet-Sur warrants a spatial-explicit observation of El Niño-related heavy precipitation in a transect from the coast to the highlands in a spatial resolution of 500 m.