This study develops a rapid algorithm coupled with the finite element method to predict the fatigue crack propagation process and select the enhancement factor for the equivalent random load spectrum of accelerated fatigue tests. The proposed algorithm is validated by several fatigue tests of an aluminum alloy under the accelerated random load spectra. In the validation process, two kinds of panels with different geometries and sizes are used to calculate the stress intensity factor, critical crack length, and crack propagation life. The simulated and experimental findings indicate that when the aluminum alloy is in a low plasticity state, the crack propagation life exhibits a linear relationship with the acceleration factor. When the aluminum alloy is in a high plasticity state, this study proposes an empirical formula to calculate the equivalent stress intensity factor and crack propagation life. The normalized empirical formula is independent of the geometry and size of different samples, although the fracture processes are different in the two kinds of panels used in our study. Overall, the numerical method proposed in this paper can be applied to predict the fatigue crack propagation life for the random spectrum of large samples based on the results of the simulated accelerated crack propagation process and the accelerated fatigue tests of small samples to reduce the cost and time of the testing.
In order to determine the average behavior time of widespread fatigue damage (WFD) in an aircraft multi-site damage (MSD) structure and complete the fatigue analysis of WFD sensitive parts, this paper adopts a probabilistic method to analyze the crack initiation and crack propagation of a single row of collinear seven-hole plates. The simulation analysis of the whole process from crack initiation to structural failure is realized. First, through statistical analysis of the test data of the LY12-CZ alloy single-detail plate with hole, the probability distribution of crack initiation life and growth rate is obtained, and this probability distribution is expressed by the randomization of variables. Then, using the related theories of fracture mechanics and fatigue statistics, the whole process of initiation, propagation, and connection of multiple cracks in the MSD structure to the occurrence of WFD was realized through the Monte Carlo method. Finally, a group of single-row seven-hole plate examples are used to verify the accuracy of the calculation results. The results show that the calculated results in this paper are in good agreement with the experimental data, and can accurately predict the life of MSD structures under a certain reliability.
The evaluation of structural crashworthiness is important for the development of civil aircraft. In this study, cargo luggage was considered in the vertical drop simulation of an aircraft mid-fuselage section. First, quasi-static compression tests on three types of luggage made of different materials were conducted. Then, a finite element model (FEM) of the cargo luggage was developed with a crushable foam material in LS-PrePost4.5 software. The finite element analysis results of the luggage made of different materials were consistent with the corresponding compression experiments. Secondly, the FEM of the mid-fuselage section was established without cargo luggage. The simulated displacement and acceleration of the fuselage section were consistent with the test results. Finally, the influences of cargo luggage on the fuselage vertical drop response were studied with the FEM considering both the fuselage structure and cargo luggage. Compared with the responses of the fuselage without cargo luggage, the cargo luggage could reduce the deformation of the cargo bay and maintain the integrity of the passenger living space in the cabin at the vertical velocity of 6 m/s, even though the initial kinetic energy was higher.