It is expected that more vehicles will be electrified in the coming years. This will require reliable access to charging infrastructure in society, and the charging will include data exchange between different actors. The aim of this review article is to provide an overview of recent scientific literature on different charging strategies, including for example battery swapping, conductive- and inductive charging, and what data that may be needed for charging of different types of electric vehicles. The methodology of the paper includes investigating recent scientific literature and reports in the field, with articles from 2019 to 2022. The contribution of this paper is to provide a broad overview of different charging strategies for different types of electric vehicles, that could be useful today or in the coming years. The literature review shows that data utilized for charging or discharging includes for example information on the battery, temperature, electricity cost, and location. It is concluded that the preferred charging strategy for an electric vehicle may depend on the type of electric vehicle and when, where, and how the vehicle is used.

In this paper, hard magnetic materials for future use in electrical machines are discussed. Commercialized permanent magnets used today are presented and new magnets are reviewed shortly. Specifically, the magnetic MnAl compound is investigated as a potential material for future generator designs. Experimental results of synthesized MnAl, carbon-doped MnAl and calculated values for MnAl are compared regarding their energy products. The results show that the experimental energy products are far from the theoretically calculated values with ideal conditions due to microstructure-related reasons. The performance of MnAl in a future permanent magnet (PM) generator is investigated with COMSOL, assuming ideal conditions. Simplifications, such as using an ideal hysteresis loop based on measured and calculated saturation magnetization values were done for the COMSOL simulation. The results are compared to those for a ferrite magnet and an NdFeB magnet. For an ideal MnAl hysteresis loop, it would be possible to replace ferrite with MnAl, with a reduced weight compared to ferrite. In conclusion, future work for simulations with assumptions and results closer to reality is suggested.