A conventional oil and gas well does not have a natural production capacity, which necessitates a hydraulic fracturing operation. The effectiveness of the fracturing directly impacts the economic benefit of a single well. Among the various parameters, including fracture spacing, fracture width, and conductivity, fracture half-length is one of the main influencing factors on the productivity of horizontal wells. For conventional homogeneous reservoirs, research mainly focuses on fracture patterns with equal fracture lengths. However, in actual production processes, due to mutual interference and the superimposition of drainage areas between fractures, the production distribution of each fracture is non-uniform. Typical fracture distribution patterns mainly include uniform, staggered, dumbbell, and spindle. While many believe that the dumbbell-shaped fracture distribution pattern has the best effect, there has been no quantitative study on the length of each fracture under the dumbbell-shaped pattern. Based on this, this paper proposes a modeling approach for function-shaped fracture distribution that takes advantage of the high production of edge fractures and the low output of middle fractures in horizontal wells. The influence of this approach on production capacity is studied. Constant, linear, and parabolic functions are used to establish the relationship between fracture position and fracture half-length, optimizing the fracture distribution function to achieve the best production effect. This method can guide the horizontal well fracture distribution in the block to maximize productivity. The results show that the parabolic function-shaped model is better than the linear function-shaped model and the constant function-shaped model is the least effective. The research presented in this paper offers a new idea for optimizing on-site fracturing plans. It utilizes mathematical expressions to describe the parameters that affect productivity, which provides valuable guidance for designing multi-stage fractured horizontal wells in the field. In the future, this research will be extended by exploring the optimal fracture distribution function under different formation conditions.

This study investigates the impact of nanomaterials on different surfactant solutions. By measuring the parameters (including emulsification property, zeta potential, DLS, CA, IFT, etc.) of imbibition liquid system with nanoparticles and without nanoparticles, combining with imbibition experiments, the law and mechanism of improving the imbibition recovery of nanomaterials were obtained. The findings demonstrate that the nano-silica sol enhances the emulsification and dispersion of crude oil in the surfactant system, resulting in smaller and more uniform particle sizes for emulsified oil droplets. Non-ionic surfactant AEO-7 has the best effect under the synergistic action of nanomaterials. Zeta potential and DLS tests also showed that AEO-7 exhibits smaller particle sizes due to their insignificant electrostatic interaction with nanoparticles. Furthermore, the addition of nanomaterials enhances the hydrophilicity of core and reduces the interfacial tension. Under the synergistic action of nanoparticles, AEO-7 still showed the best enhanced core hydrophilicity (CA 0.61° after imbibition) and the lowest interfacial tension (0.1750 mN·m⁻¹). In the imbibition experiment, the imbibition recovery of the system with nanomaterials is higher than that of the non-nanomaterials. The mixed system of AEO-7 and nano-silica sol ZZ-1 has the highest imbibition recovery (49.27%). Combined with the experiments above, it shows that nanomaterials have a good effect on enhancing the recovery rate of tight core, and the synergistic effect of non-ionic surfactant AEO-7 with nanomaterials is the best. Moreover, nanomaterials reduce adhesion work within the system while improving spontaneous imbibition recovery. These findings provide theoretical guidance for better understanding the mechanism behind nanomaterial-induced imbibition enhancement as well as improving tight oil’s imbibition recovery.

Hydraulic fracturing is an effective method for enhancing coalbed methane (CBM) recovery. The injected fluids affect the chemical and physical structures of coal, resulting in diverse stimulation effects. While most current research primarily focuses on alterations in pore-fracture structures, few studies have examined or compared the changes in chemical structures during the fracturing process. This study presents a comparative analysis of the effects of five types of pre-fracturing fluids—slick water, acid solutions, and oxidant solutions—on coal, with the aim of identifying the similarities and differences in how these fluids modify the chemical structure of coal. The results indicate that, after being treated by five pre-fracturing fluids, the aromaticity index (I) increased, and the degree of aromatic condensation polymerization (DOC) decreased. The length of the aliphatic chain (L) increased after being treated by PAM but decreased after being treated by acids and oxidizers. Additionally, the graphitization (g) of all coal samples increased. Among the treatments, the combined acid system of hydrochloric acid (HCl) and hydrofluoric acid (HF) demonstrated a more pronounced effect on enhancing aromaticity and graphitization of the microcrystalline structure compared to HCl alone. Sodium hypochlorite (NaClO) had the most significant impact on the ordering of the macromolecular structure, while hydrogen peroxide (H₂O₂) exerted the most pronounced effect on the graphitization of the microcrystalline structure. These findings contribute to a deeper understanding of the interaction mechanisms between fracturing fluids and coal, providing theoretical support for the efficient development of CBM.

The fourth member of the Shahejie Formation in the Leijia area of the western depression of the Liaohe Oilfield represents a typical shale oil reservoir. However, post-hydraulic fracturing operations in this region are often hindered by significant discrepancies in well productivity, low fracturing fluid flowback efficiency, and an unclear understanding of reservoir damage mechanisms during fracturing. These challenges have become major bottlenecks restricting the efficient exploration and development of shale oil in this block. In this study, a series of laboratory-simulated experiments were conducted to investigate the primary mechanisms of formation damage induced by fracturing fluids in shale oil reservoirs. An experimental methodology for evaluating reservoir damage caused by fracturing fluids was developed accordingly. Results indicate that guar gum-based fracturing fluids exhibit good compatibility with formation-sensitive minerals, resulting in relatively minor damage. In contrast, capillary trapping of the aqueous phase leads to moderate damage, while polymer adsorption and retention cause low to moderate impairment. The damage associated with fracturing fluid invasion into fractures is found to be moderately high. Overall, the dominant damage mechanisms of guar gum fracturing fluids in the Shahejie Member 4 shale oil reservoir are identified as aqueous phase trapping and polymer adsorption. Based on the identified damage mechanisms, corresponding optimization strategies for fracturing fluid formulations are proposed. The findings of this research provide critical insights for improving shale oil development strategies in the Leijia area.