In order to improve the pseudocapacitance performance of metal sulfide electrode materials and obtain supercapacitor energy storage devices with excellent electrochemical reversibility and long-term cycle stability, the synthesis of flower-shaped crystal nickel–cobalt sulfide and its supercapacitor performance were studied. NiCo2S4 flower-shaped crystal nickel–cobalt sulfide was prepared by the hydrothermal method with nickel foam as the raw material, and electrode materials were added to prepare supercapacitor electrodes for testing of the supercapacitor performance. The physical properties of flower-shaped crystal nickel–cobalt sulfide were tested by a scanning electron microscope and transmission electron microscope, and the voltammetric cycle and constant current charge and discharge of supercapacitor electrodes prepared from this sulfide were analyzed through experiments. The experimental results showed that the flower crystal microstructure had a positive effect on the electrochemical properties. The capacitance value was always high at different current densities, and the capacity was as high as 3867.8 A/g at pH 12. After 2000 voltage–charge–discharge cycle tests, the petal-like sulfide capacity still had a retention rate of 90.57, the flower crystal nickel–cobalt sulfide still showed an excellent supercapacitor performance and the specific capacity was still high, which demonstrates that this sulfide has excellent cyclic stability and durability in electrochemical applications.
A sulfur host material of a Fe2O3/rGO/CNT fluffy composite with Fe2O3 and CNTs being dispersed between the rGO interlayers has been prepared by a hydrothermal reaction. The initial specific capacity of Fe2O3/rGO/CNT/S at 2C is 899 mA h g−1.
The utilization of lithium–sulfur battery is hindered by various challenges, including the “shuttle effect”, limited sulfur utilization, and the sluggish conversion kinetics of lithium polysulfides (LiPSs). In the present work, a theoretical design for the viability of graphitic carbon nitride (g-C3N4) and phosphorus-doping graphitic carbon nitride substrates (P-g-C3N4) as promising host materials in a Li-S battery was conducted utilizing first-principles calculations. The PDOS shows that when the P atom is introduced, the 2p of the N atom is affected by the 2p orbital of the P atom, which increases the energy band of phosphorus-doping substrates. The energy bands of PC and Pi are 0.12 eV and 0.20 eV, respectively. When the lithium polysulfides are adsorbed on four substrates, the overall adsorption energy of PC is 48–77% higher than that of graphitic carbon nitride, in which the charge transfer of long-chain lithium polysulfides increase by more than 1.5-fold. It is found that there are powerful Li-N bonds between lithium polysulfides and P-g-C3N4 substrates. Compared with the graphitic carbon nitride monolayer, the anchoring effect of the LiPSs@P-g-C3N4 substrate is enhanced, which is beneficial for inhibiting the shuttle of high-order lithium polysulfides. Furthermore, the catalytic performance of the P-g-C3N4 substrate is assessed in terms of the S8 reduction pathway and the decomposition of Li2S; the decomposition energy barrier of the P-g-C3N4 substrate decrease by 10% to 18%. The calculated results show that P-g-C3N4 can promote the reduction of S8 molecules and Li-S bond cleavage within Li2S, thus improving the utilization of sulfur-active substances and the ability of rapid reaction kinetics. Therefore, the P-g-C3N4 substrates are a promising high-performance lithium-sulfur battery anchoring material.