A no-core hollow fiber-based surface plasmon resonance (SPR) sensor is proposed to detect an ultra-wide range of refractive index (RI) in this letter. The no-core fiber takes the central air hole coated with a gold layer as an analyte channel, and the external environment as a cladding, which ensures that the incident light can propagate in the fiber at an ultra-wide RI range, and thus implementing the detection. We theoretically investigate the sensing performance of the sensor at an ultra-wide range of RI, and also the impact of the size of the central hole. The results indicate that the sensor can effectively work at the RI covering, but not limited to the range from 1.28 to 1.7. The higher sensitivities appear when the RI of the analyte is close to that of the fiber material, and the maximum sensitivity is 4981 nm/RIU at 1.5 of the analyte RI. In contrast with the majority of the previous SPR sensors for detection of wide RI, the proposed sensor has the advantages of simple structure, easy operation and ultra-wide range, and would be more competitive in the SPR sensing fields.
To facilitate the sensor fabrication and sensing operation in microstructured optical fiber-based surface plasmon resonance (SPR) sensors for high refractive index (RI) detection, we propose a special hollow fiber-based SPR sensor that comprises an opening on its body side and a thin gold layer coated on its outer surface. The analyte is able to flow into the hollow core through the side-opening to form new fiber core, with the Gaussian-like mode propagating in it. We investigate the sensing performance of the proposed sensor in a higher RI range of 1.48 to 1.54 at two feasible schemes: one is to only fill the fiber core with analyte (Scheme A), and the other is to directly immerse the sensor in the analyte (Scheme B). The results demonstrate that our sensor exhibits higher wavelength sensitivity at Scheme A with a maximum wavelength sensitivity of 12,320 nm/RIU, while a greater amplitude sensitivity was found at Scheme B with a maximum amplitude sensitivity of 1146 RIU−1. Our proposed sensor features the advantages of simple fabrication, flexible operation, easy analyte filling and replacing, enhanced real-time detection capabilities, high RI detection, and very high wavelength sensitivity and amplitude sensitivity, which makes it more competitive in SPR sensing applications.
In this paper, an intra-cavity SPR sensor based on erbium-doped fiber (EDF) laser is proposed to achieve higher sensitivity for detecting analyte refractive indices. A liquid-core fiber-based SPR sensor is first designed to match the operating wavelength of 1530 nm in the fiber laser intra-cavity, and then placed into the cavity of the EDF laser to constitute the all-fiber intra-cavity SPR sensor. We theoretical investigate the influence of pump power, cavity loss and EDF length on the sensitivity of the proposed intra-cavity SPR sensor. The results indicate that the sensitivity of the intra-cavity SPR sensor can reach 1.051 × 10 9 RIU −1 (refractive index unit), which is enhanced 4 × 10 6 times compared with the sensitivity of 253 RIU −1 obtained by the SPR sensor without fiber laser cavity. In addition, the sensitivity of the proposed intra-cavity SPR sensor can be flexibly tuned by changing pump power, cavity loss or EDF length. This work demonstrates that as an alternative approach, the combination of the fiber laser intra-cavity spectroscopy and the fiber-based SPR sensor can achieve a remarkable enhancement in sensitivity.
To achieve enhanced sensitivity in low refractive index (RI) detection, we design a novel fiber ring laser intracavity surface plasmon resonance (SPR) sensing system by integrating a microstructured optical fiber (MOF)- based SPR sensor into the cavity of an erbium-doped fiber (EDF) ring laser. The MOF-based SPR sensor is specifically designed for low RI detection, featuring an external gold coating that simplifies both fabrication and operation. Numerical results demonstrate that the sensitivity of the MOF-based SPR sensor is 2.12 RIU−1 (RI unit) at an operational wavelength of 1530 nm within the RI range of 1.111.12. When integrated into the fiber laser cavity to form the intracavity SPR sensor configuration, the sensitivity is significantly enhanced to 99.95 RIU−1—an improvement of approximately 47 times. Furthermore, the sensitivity of the proposed intracavity SPR sensor can be optimized by tuning either the pump power or the attenuator loss in the laser cavity, offering greater ease and flexibility in sensing applications. This work not only provides design guidelines for low RI detection but also introduces new approaches for sensitivity enhancement in fiber-based SPR sensing.