To solve the phase matching and analyte filling problems in the microstructured optical fiber (MOF)-based surface plasmon resonance (SPR) sensors, we present the D-shaped hollow core MOF-based SPR sensor. The air hole in the fiber core can lower the refractive index of a Gaussian-like core mode to match with that of a plasmon mode. The analyte is deposited directly onto the D-shaped flat surface instead of filling the fiber holes. We numerically investigate the effect of the air hole in the core on the SPR sensing performance, and identify the sensor sensitivity on wavelength, amplitude and phase. This work allows us to determine the feasibility of using the D-shaped hollow-core MOFs to develop a high-sensitivity, real-time and distributed SPR sensor.

We propose a temperature sensor design based on surface plasmon resonances (SPRs) supported by filling the holes of a six-hole photonic crystal fiber (PCF) with a silver nanowire. A liquid mixture (ethanol and chloroform) with a large thermo-optic coefficient is filled into the PCF holes as sensing medium. The filled silver nanowires can support resonance peaks and the peak will shift when temperature variations induce changes in the refractive indices of the mixture. By measuring the peak shift, the temperature change can be detected. The resonance peak is extremely sensitive to temperature because the refractive index of the filled mixture is close to that of the PCF material. Our numerical results indicate that a temperature sensitivity as high as 4 nm/K can be achieved and that the most sensitive range of the sensor can be tuned by changing the volume ratios of ethanol and chloroform. Moreover, the maximal sensitivity is relatively stable with random filled nanowires, which will be very convenient for the sensor fabrication.

A unique surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) is proposed in this paper, which consists of a D-shaped profile where a gold film is coated on its flat surface and a laterally accessible hollow core in which the analyte is infiltrated. The spectral sensitivity and the amplitude sensitivity of the proposed sensor are investigated by the finite element method when it is completely and partly immersed into the analyte solution. Simulation results indicate that the proposed sensor can detect the refractive index of the analyte higher than that of the PCF background, and shows higher sensitivity when its core portion is immersed into the analyte. In this way, this sensor can provide the ability of anti-interference from the metal coating. The proposed sensor can be conveniently coated with metal films and provides a possibility for real time sensing, which are not possible with traditional PCF-based SPR sensors.

An H-shaped photonic crystal fiber (PCF)-based surface plasmon resonance (SPR) sensor is proposed for detecting large refractive index (RI) range which can either be higher or lower than the RI of the fiber material used. The grooves of the H-shaped PCF as the sensing channels are coated with gold film and then brought into direct contact with the analyte, which not only reduces the complexity of the fabrication but also provides reusable capacity compared with other designs. The sensing performance of the proposed sensor is investigated by using the finite element method. Numerical results show that the sensor can work normally in the large analyte RI (n_a) range from 1.33 to 1.49, and reach the maximum sensitivity of 25,900 nm/RIU (RI units) at the n_a range 1.47–1.48. Moreover, the sensor shows good stability in the tolerances of ±10% of the gold-film thickness.

A surface plasmon resonance (SPR) sensor based on a dual-side polished microstructured optical fiber (MOF) with a dual core is proposed for a large analyte refractive index (RI; n_a) detection range. Gold is used as a plasmonic material coated on the polished surface, and analytes can be directly contacted with the gold film. The special structure not only facilitates the fabrication of the sensor, but also can work in the n_a range of 1.42–1.46 when the background material RI is 1.45, which is beyond the reach of other traditional MOF-SPR sensors. The sensing performance of the sensor was investigated by the wavelength and amplitude interrogation methods. The detailed numerical results showed that the proposed sensor can work effectively in the n_a range of 1.35–1.47 and exhibits higher sensitivity in the n_a range of 1.42–1.43.

To avoid coating and filling into the fiber holes, facilitate the phase-matching and eliminate cross-sensitivity problems, we propose a surface plasmon resonance sensor based on a fan-shaped microstructured optical fiber (MOF) for the simultaneous sensing of temperature and refractive index (RI). The fan-shaped structure is fabricated by polishing two sides of MOF with an angle of 120°. One side is coated with the gold film and polydimethylsiloxane layer for temperature sensing, and the other side is only coated with the gold film for RI sensing. The two sensing sides can support resonance peaks with two polarized directions at the angle of 120°, which are independent without cross-sensitivity. By monitoring the shifts of the two polarized peaks, our numerical results show that the temperature sensitivity is 2.932 nm/°C in the range of 30 °C to 40 °C, and RI sensitivity is 4235 nm/RIU in the range of 1.38 to 1.39, respectively.