An intermodal fiber interferometer with an optical frequency scanning light source is considered to attain two main goals: signal fading elimination and achieving a linear response to external fiber perturbations. It is demonstrated that the interferometric signal traces repeatedly generated by the laser frequency scans can be used to average the target signal by calculating their autocorrelation function. A correlation approach is studied for signal processing, and various correlation function modifications are proposed and theoretically analyzed to achieve complete signal reconstruction. In particular, the relation between the autocorrelation function and the averaged amplitude characteristic is demonstrated. The efficiency of the proposed interferometer’s scheme and the correlative signal processing are confirmed experimentally for the case of a sine-shaped fiber length modulation. We believe that the proposed method will be useful in real-time sensing applications.

An intermodal fiber interferometer using the light from an incoherent broadband source has been considered analytically and implemented as a laboratory device. It was shown that this optical scheme could be used to measure external perturbations that cause a change in the optical length of a multimode fiber. The use of an optical spectrum analyzer and correlation functions approach in extracting the utility signal made it possible to achieve a linear response to the measured external perturbation and effective fading mitigation. A pair of integral coefficients was introduced: the contrast coefficient for characterization of the coherency of the operation regime, and the fading coefficient for estimating the signal stability against non-signal parasitic influences. Analytical expressions for the utility signal parameters were derived in dependence on the parameters of the light source, multimode fiber, and optical spectrum analyzer. The relationships among fiber length, width of the light source spectrum, and frequency resolution of the optical spectrum analyzer were stated for the optimum regime of interferometer operation. The simulation of the external perturbations performed at the elaborated device proved the applicability of the proposed scheme as a sensor of various physical quantities.

Pulse wave measurement is a highly prominent technique used in biomedical diagnostics. The development of novel cost-effective pulse wave sensors will pave the way to more advanced healthcare technologies. This work reports on a pulse wave optical fiber sensor interrogated by a smartphone. The sensor performance was tested in terms of signal to noise ratio, repeatability of demodulated signal and suitability of demodulated signals for the extraction of information about direct and reflected waves. The analysis showed that the observed fluctuations of signal parameters are caused by variability of the state of the cardiovascular system and not by the system noise.

Interferometric fiber-optic sensors provide very high measurement accuracy and come with many other benefits. As such, the study of signal processing techniques for fiber-optic interferometers in order to extract information about external perturbation is an important area of research. In this work, the method of Fourier analysis was applied to extract information from the output signals of an intermodal fiber interferometer with spectral interrogation. It is shown that the external perturbation can be measured by obtaining the phase spectrum of the spectral transfer function of an intermodal fiber interferometer and determining the phase difference of a certain pair of mode groups. A mathematical model of this approach was developed, taking into account the parameters of the laser and the optical fiber, the number of excited mode groups, and the parameters of external perturbation. The theoretically considered method of Fourier analysis was experimentally verified, and it was proved to provide a linear response to external perturbation in a wide dynamic range.

An intermodal fiber interferometer based on broadband light source and spectral signal processing is proposed and experimentally investigated. The perturbation of the parameters of the spectrum analyzer (scanning range and width of the instrumental spectral response function) on the output signal is demonstrated. It is shown that the method of correlation signal processing makes it possible to obtain linear and stable response to external fiber perturbations. The proposed interferometer scheme can be prospective for development of real-time sensors of physical quantities. Keywords: intermodal fiber interferometer, fiber-optic sensors, fiber optics, multimode fiber, interferometers.