In order to explore the influence of dip angles on the deformation and failure of a coal–rock combination, uniaxial compression experiments were carried out on a coal–rock combination with different dip angles, and the acoustic emissions (hereinafter referred to as AE) responses during loading were collected. Based on the damage mechanics theory and fractal theory, the fractal dimensions of different damage degrees were calculated. The results show that, with the increase in the inclination angle, the compressive strength and elastic modulus of the coal–rock combination gradually decreased, while the AE ringing count gradually increased first and then decreased. At the initial loading stage of the specimen, the greater the damage degree of the coal–rock combination under the same strain condition, the larger the value of its overall fractal dimension. The AE fractal dimension of the coal–rock combination increases gradually between 10% and 20% of the damage degree. It suddenly decreased between 50% and 60%, then increased slightly before gradually decreasing to the minimum between 80% and 100%. The sudden decrease in fractal dimension, a slight increase, and then a continuous decrease can be used as the precursor information for the instability and failure of the coal–rock combination.

The mechanism of strong mine pressure control in the initial mining and caving stages under multiple key strata (MKS) was studied by theoretical analysis, numerical simulation and field measurement in order to avoid the dynamic pressure accidents caused by the MKS breaking in interactions in the initial mining and caving stage. Panel 13103 (P13103) in the Shan Xi Jinshen Shaping Coal Mine was used sas the study site. The overlying structure and the breaking characteristics of the key strata were analyzed and the overlying structure model of longwall top-coal caving (LTC) under MKS was established. Reasonable initial mining heights and initial caving positions were determined and the spatial and temporal characteristics of ground pressure and roof structure of the working face in the mining process were obtained. The results show that, in the scheme of starting top-coal caving after the working face advanced 20 m, the support damage ratios were all greater than 50% with roof weighting, which is prone to induce prop crash accidents. The dynamic load formed by the second weighting was greater than first weighting under the MKS. The duration of mine pressure tended to be stable with fully developed caving zone heights. With the designed mining scheme, the safe and efficient mining of P13103 is guaranteed.

To reveal the influence mechanism of mining speed on roof fracture-type rockburst, the Brazilian split technique combined with acoustic emission monitoring technology was employed to study the effects of loading rates on the tensile failure characteristics and acoustic emission parameters of coal series sandstone. The linear relationship between the tensile strength of the samples and the change rate of tensile stress was determined. The mining speed was introduced into the mechanical model of initial and cyclic fracture of the hard roof, and the quantitative relationship between the maximum rate of change of tensile stress within the hard roof and the mining speed was derived. Based on this, a computational model for the bending elastic energy of the hard roof during initial and cyclic fractures, considering the mining speed, was established. The main findings are as follows: As the loading rate increases, the distribution range of acoustic emission energy in sandstone Brazilian split samples before failure widens, with a significant rise in acoustic emission ring-down counts and energy at failure. At lower loading rates, acoustic emission events primarily occur near sample failure, whereas at higher rates, they mostly happen in the early loading stage. The higher the mining speed, the less opportunity there is for internal micro-fractures to develop and expand before the hard roof fractures, which macroscopically results in increased tensile strength and a larger amount of energy released at the moment of fracture. Bending elastic energy rises approximately linearly with mining speed, and the thicker the hard roof, the more sensitive the bending elastic energy is to changes in mining speed. This effect is even more pronounced during cyclic fractures. Optimizing mining speed is crucial for preventing roof fracture-type rockbursts, especially in mining workfaces with thick and hard roofs.

The caving characteristics of the goaf significantly impact the mining stability of the working face. The coal-forming environment of the steeply dipping coal seam is complex. After mining, the caving rock mass rolls to the lower part of the working face due to gravity, and the caving compaction characteristics of the working face are different from those of the flat and gently inclined working face, taking Huainan Xinji No. 2 Mine 211112 high-angle composite roof working face large-area gang roof fall area as the engineering background. To safely pass through a large roof fall area, a FLAC3D numerical simulation method considering the goaf’s compaction effect and the excavation’s additional damage is proposed. The Weibull distribution function is introduced to modify the elastic modulus parameters of the rock mass after excavation, which more accurately reflects the damage process of the rock mass after hole. Based on the goaf compaction theory, the elastic model is developed for the second time, and the accurate simulation of the caving rock mass is realized. On this basis, the proposed numerical simulation method is used to simulate the large-area roof caving of the large-angle working face, a scheme to control the stability of the working face by using the paste filling technology is proposed, and the material parameters of the filling body are determined. The research results show that when the water-cement ratio of the backfill is 3 : 1, the simulation and field trial results are good, and the safe and efficient mining of the large-angle composite roof working face is realized, which verifies the feasibility and correctness of the coupled simulation method. At the same time, the research results can provide a reference for controlling the roof fall area of the working face with a large inclination angle.

Repeated mining under insufficiently collapsed gobs is a complex process in underground mining and is associated with safety hazards such as ground collapse and subsidence. The effect of layer spacing on the fracture network evolution and fluid transport mechanisms in rock strata during this process has not been systematically studied. In this work, the discrete element method was employed to analyze the fracture development and seepage evolution of surrounding rocks in the Nanliang coal mine across varying layer spacings (5, 20, 35, 50, and 65 m). A systematic evaluation of the rock mass integrity was conducted through damage coefficient quantification. The key findings revealed that an increase in the layer spacing progressively reduced the damage coefficients in both the overburden strata above the goaf and in the interlayer formations ahead of the working face, accompanied by reduced fracture propagation intensity. Shear failure mechanisms dominated throughout the mining process. Fractal characteristics of the fractures intensified with the advance of the working face, while the hydraulic conductivity and interstitial pressure in the interlayer strata exhibited declining trends with reduced attenuation rates. Our findings provide critical insights for ensuring the safety and improving the efficiency of repeated mining under insufficiently collapsed gobs.