Dissimilar steel welded structures are commonly used in the marine engineering field. Owing to the scarcity of in-depth investigation into the intricate pattern of residual stress distribution in welding within 316L/Q345 dissimilar steel welded joints and methods for reducing this stress, a platform-based vibratory stress relief (VSR) experimental system was established to comprehensively study the effects of VSR on the mechanical properties and microstructure of 316L/Q345 welded structures. Scanning electron microscopy (SEM) was used to examine the fracture morphology and explore the intrinsic mechanisms by which VSR enhances the mechanical properties of welded joints. The findings suggest that VSR is capable of significantly homogenizing and diminishing the welding residual stress within the heat-affected area of 316L/Q345 mismatched steel welded specimens. The significant reduction in residual stress after VSR can primarily be attributed to the combination of alternating stress applied by the VSR platform and the welding residual stress, which exceeded the yield limit of the metal materials. Furthermore, the significant reduction in residual stress, refinement of second-phase particles, and changes in fracture mechanisms are the main reasons for the increased strength observed after VSR. This study has significant engineering application value, providing a theoretical basis for the use of VSR treatment to enhance the reliability of the safe operation of marine engineering equipment.
17 June 2026 in Journal of Zhejiang University-SCIENCE A
Arrival-time picking is a fundamental step in time-of-arrival (TOA)-based localisation in current and future acoustic emission (AE), microseismic and seismic localisation systems. The accurate detection of TOA is of great importance for high localisation accuracy. This work presents a histogram distance-based method for TOA detection of elastic wave signals. The authors treat an original elastic waveform that includes the arrival as two different locally stationary segments, namely the intervals following and preceding arrival. To determine the optimal separation of these two stationary segments, ie the arrival time, histograms of these intervals are calculated and a measure of the distance between them modified from the Bhattacharyya coefficient is proposed. The performance of the proposed method is evaluated using TOA picking for AE. The method is shown to provide accurate and robust picks on AE signals under various signal-to-noise ratios. To evaluate the adaptability of the method to other TOA picking scenarios, it is applied to detect the seismic P-phase. The detection accuracy is adequate and errors are constrained to within a few seconds. Factors that influence the detection accuracy are discussed. The results suggest that the proposed method has the potential to detect TOA in various fields.
1 October 2019 in IOP Conference Series: Materials Science and Engineering
High frequency vibratory stress relief (VSR) is a procedure to reduce the residual stresses by means of high frequency cyclic dynamic stress. Cyclic loading, or cyclic dynamic stress, imposed on the workpieces during the high frequency VSR affects the reduction of the residual stresses. In this study, the high frequency VSR was carried out on the Cr12MoV steel quenched specimens. And the residual stresses on the Cr12MoV steel surface before and after the high frequency VSR were studied by the hole-drilling method. The results show that the residual stresses can be effectively reduced by the high frequency VSR. Moreover, increasing the high frequency vibration frequency and the high frequency vibration amplitude can improve the effect of the high frequency VSR.