To address the problem of easily falling into local optimization and low convergence accuracy in the path planning tasks of mobile robots, an Improved Crested Porcupine Optimizer (ICPO) based on chaotic mapping is proposed. The ICPO algorithm employs a three-step optimization process. First, it utilizes SPM, a piecewise linear chaotic initialization, to optimize the population thereby enhancing its diversity and global coverage. Second, the Cauchy Distribution Inverse Cumulative Operator is incorporated to prevent convergence to local optima and to accelerate the overall convergence rate. Finally, the Gaussian mutation is applied to strengthen ICPO’s local exploitation capabilities. Comparative analysis of five algorithms (PSO, DBO, GOOSE, CPO, and ICPO) is conducted using eight standard benchmark functions. Results demonstrate that ICPO achieves a faster convergence rate and superior convergence accuracy. Furthermore, in path planning experiments within 20 × 20 and 40 × 40 grid maps, ICPO reduced the path length by 4.53% and 8.99%, respectively, compared to the CPO algorithm.
24 April 2025 in Journal of Materials Engineering and Performance
To improve the safety and service life of carbon steel used in marine structures, appropriate regulation of residual stress in carbon steel is required. This paper investigates the effects of high-frequency vibratory stress relief (VSR) and tempering on the residual stress, microstructure, and surface hardness of 45 steel. After the high-frequency VSR and tempering at 200 °C for 30 min treatment, the microstructure is still tempered martensite. When the 45 steel experimental specimens were tempered at 600 °C for 30 min, the microstructure changed from tempered martensite to tempered sorbite, and the residual stress regulation effect of 45 steel experimental specimens was significantly improved. However, its surface hardness decreased significantly, which reduces the mechanical properties of marine structural components. Comparatively, high-frequency VSR is an effective method to regulate residual stress while ensuring that the microstructure of marine structural components does not undergo drastic changes. This study provides technical and theoretical support for the residual stress regulation treatment of 45 steel in marine engineering.