The numerical modelling procedures and damage criteria of both existing and retrofitted reinforced concrete (RC) elements are crucial for reliable seismic assessment and the retrofitting of existing RC buildings. A widely used retrofitting technique involves the application of fiber-reinforced polymers (FRPs) to vulnerable RC elements, enhancing their flexural and shear capacities. However, the current version of EC8-3 does not explicitly provide guidelines for numerical modelling, nor does it offer specific information on the assessment of retrofitting elements. This study focuses on developing a concentrated plasticity modelling approach and defining the damage state criteria for retrofitted RC columns with FRPs, based on experimental data from the literature. A database comprising 99 FRP-retrofitted RC columns was compiled, and regression analysis procedures were used to calibrate the peak load rotation, ultimate rotation, and post-capping rotation capacities. The modelling approach was validated through comparison with existing formulations using OpenSees, and the results indicate its adequacy for the seismic assessment of retrofitted buildings. This research advances the seismic assessment of FRP-retrofitted RC elements by introducing a novel trilinear moment–rotation model and refined damage criteria, which provide higher predictive accuracy in comparison to existing proposals. It also addresses critical gaps in seismic assessment practices by proposing the peak load rotation as a more reliable SD limit state threshold for retrofitted columns.
The absence of analytical expressions in current codes for evaluating the critical moment for lateral–torsional buckling of cold-formed beams with omega-shaped sections presents a fundamental challenge when assessing their resistance to global buckling. In response to this challenge, a comparative study was conducted to explore various approaches for calculating the critical moment. This involved both analytical and numerical analyses, using different methods available in codes and computational tools. The analytical analysis followed the Effective Width Method, employing the expression proposed in ENV 1993-1-1:1992, which is commonly used for evaluating the critical lateral–torsional moment of hot-rolled profiles. Numerical analyses were then performed using the ABAQUS v6.13, GBTUL v2.0, and CUFSM v5.05 software packages. The ABAQUS model, validated with results obtained from an experimental campaign, serves as the reference model. Upon assessing the bending moment resistances according to European, Brazilian, and American standards, consistency was found among these standards. However, it became evident that using the analytical expression proposed for hot-rolled profiles is inadequate for evaluating the critical lateral–torsional moment of CFS omega-shaped profiles. Conversely, the agreement between the ABAQUS, GBTUL, and CUFSM results suggests their utility as reliable tools for estimating the elastic critical lateral–torsional buckling moment.