The absence of analytical expressions in current codes for evaluating the critical moment for lateral–torsional buckling of cold-formed beams with omega-shaped sections presents a fundamental challenge when assessing their resistance to global buckling. In response to this challenge, a comparative study was conducted to explore various approaches for calculating the critical moment. This involved both analytical and numerical analyses, using different methods available in codes and computational tools. The analytical analysis followed the Effective Width Method, employing the expression proposed in ENV 1993-1-1:1992, which is commonly used for evaluating the critical lateral–torsional moment of hot-rolled profiles. Numerical analyses were then performed using the ABAQUS v6.13, GBTUL v2.0, and CUFSM v5.05 software packages. The ABAQUS model, validated with results obtained from an experimental campaign, serves as the reference model. Upon assessing the bending moment resistances according to European, Brazilian, and American standards, consistency was found among these standards. However, it became evident that using the analytical expression proposed for hot-rolled profiles is inadequate for evaluating the critical lateral–torsional moment of CFS omega-shaped profiles. Conversely, the agreement between the ABAQUS, GBTUL, and CUFSM results suggests their utility as reliable tools for estimating the elastic critical lateral–torsional buckling moment.
This study investigates the shear behavior of self-drilling screw connections between cold-formed steel (CFS) studs and fiber-reinforced lightweight concrete (FRLWC) sheathing boards, for which experimental load–slip data remain scarce despite their use in sheathed shear wall systems. Eighteen push-out tests were performed considering two screw diameters (5.5 and 6.3 mm) and three FRLWC formulations with different mechanical properties. For each specimen, the load–slip response was characterized in terms of peak strength, stiffness at multiple load levels, ductility, deformability, and energy absorption. The results show that shear resistance, stiffness, and energy dissipation are governed by the screw diameter, while the FRLWC formulation has a secondary influence on the response, for the larger screw diameter. A modified Foschi model was calibrated against the experimental curves and reproduced the push-out results with good agreement. Overall, the dataset that was generated and the calibrated parameters provide a strong basis for the design and the numerical modeling of CFS–FRLWC connections in CFS sheathed shear wall systems.