Anthony Kerr

Dr. Anthony Kerr

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MCMichael Cyberey
Michael Cyberey
TFTannaz Farrahi
Tannaz Farrahi
JLJiwei Lu
Jiwei Lu
AKAnthony Kerr
Anthony Kerr
RWRobert M. Weikle
Robert M. Weikle
ALArthur W Lichtenberger
Arthur W Lichtenberger
The current state-of-the-art approach for SIS junction fabrication is based on magnetron sputtering and the Gurvitch Al overlayer trilayer process where an Al overlayer is deposited onto the Nb base electrode in order to subsequently grow a critical ~1 nm AlOx or AlN tunnel barrier. While the switch from AlOx to AlN barriers has significantly increased the achievable critical current density, and significant research has been performed to understand and optimize ICP AlN growth, the use of Nb electrodes provides an upper limit to the frequency range for low-noise operation when employed in THz mixer applications, and has lead to the study and use of alternative materials with higher transition temperatures (Tc) such as NbN and NbTiN. The Nb electrodes also impose stringent cooling requirements, replacement of both electrodes with higher Tc materials can increase the required device operating temperature to 10 K, thus reducing the power consumption of the refrigeration system, a building block for the realization of more energy efficient superconducting computing systems, such as those based on single-flux-quantum (SFQ) logic [6], [7], [8], [9]. In this work, we have departed from conventional SIS material growth techniques through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD) - that offers unique capabilities to tailor materials and interfaces. Using RBTIBD technology, we have realized the first ever NbTiN/AlN/NbTiN SIS junctions with highest yet reported sum-gap voltages exceeding 5.0 mV, potentially extending the theoretical limit of low-loss SIS mixing applications beyond 1.2 THz and relaxing the cooling requirements for superconducting device applications.

7 January 2015 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MCMichael Cyberey
Michael Cyberey
DODavid Oakland
David Oakland
JZJian Z. Zhang
Jian Z. Zhang
AKAnthony Kerr
Anthony Kerr
SPShing-Kuo Pan
Shing-Kuo Pan
ALArthur W. Lichtenberger
Arthur W. Lichtenberger
High quality, low-leakage superconductor-insulator-superconductor (SIS) junctions with Nb electrodes and aluminum oxide barriers are widely reported in the literature, and have become integral in the design and fabrication of various superconducting circuits. However, as current densities are increased, aluminum oxide based tunnel barriers show excess leakage currents due to defects and pinholes in the barrier layer. First reported by our group in 2007, AlN tunnel barriers grown via inductively coupled plasma (ICP) nitridation of Al overlayers are a promising alternative, producing low-leakage Nb/Al-AlN/Nb SIS junctions, with current densities in excess of 30 kA/cm2. A correlation between junction quality and plasma dissociation has been reported for Nb/Al-AlN/Nb junctions produced via an electron cyclotron resonance (ECR) plasma. In this work, a quantitative measure of the relative dissociation (RD) of an ICP is determined through the use of a commercially available Ocean Optics USB4000 Optical Spectrometer. The effects of various ICP parameters on the RD, and a correlation between the RD and quality of the resulting Nb/Al-AlN/Nb junctions are reported.

16 December 2024 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
Alessandro NavarriniAlessandro Navarrini
Alessandro Navarrini
PDPhilip Dindo
Philip Dindo
AKAnthony Kerr
Anthony Kerr
JLJoseph Lambert
Joseph Lambert
FMF. Patricio Mena
F. Patricio Mena
KSKamaljeet Saini
Kamaljeet Saini
We describe the design, construction, and performance of a waveguide orthomode transducer (OMT) for the 209–281 GHz frequency band. The device is one of three candidates being considered for deployment in the upgraded Atacama Large Millimeter/submillimeter Array (ALMA) Band 6 receiver, known as “Band 6v2,” currently under development by the National Radio Astronomy Observatory (NRAO). The OMT is based on a symmetric reverse coupler structure. It has a circular waveguide input port (diameter 1.29 mm) and two single-mode oval waveguide output ports with full-radius corners matched to WR3.7 rectangular waveguide (0.94 mm × 0.47 mm). A circularto-square waveguide transition is used on the input side. The two oval waveguide outputs have E-plane orientations parallel to each other and are located on opposite sides of the OMT module. The device was optimized using a commercial 3D electromagnetic simulator. The OMT consists of a split-block assembly, fabricated using a conventional CNC micro-milling machine. The device was tested at room temperature using a commercial Vector Network Analyzer (VNA) equipped with WR-3.4 frequency extension modules. An initial OMT design demonstrated excellent performance but was susceptible to micron alignment shifts. These shifts, caused by thermal contraction during cryogenic cooling, resulted in inconsistent isolation and cross-polarization. To overcome these problems, innovative alignment and module locking techniques were developed to ensure stable OMT operation with thermal cycling. This article will detail these methods and their successful implementation. Across the 209-281 GHz band, the measured input and output return losses exceed 17 dB, the room temperature insertion losses are less than 0.5 dB, isolations surpass 52 dB and crosspolarizations are greater than 40 dB for both polarization channels. The device meets the requirements set for the Band 6v2 OMT. The OMT design is scalable to higher frequencies, and the alignment and locking techniques are suitable for sub-millimeter applications.

12 June 2025 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
PDPhilip Dindo
Philip Dindo
Alessandro NavarriniAlessandro Navarrini
Alessandro Navarrini
JLJoseph G. Lambert
Joseph G. Lambert
AKAnthony Kerr
Anthony Kerr
SPShing-Kuo Pan
Shing-Kuo Pan
KSKamaljeet Saini
Kamaljeet Saini
A new method is presented for measuring the intermediate frequency (IF) output impedance (ZIF) of a superconducting tunnel junction (SIS) mixer at cryogenic temperatures. As an example, the impedance ZIF of an ALMA Band 6 (211-275 GHz) SIS mixer chip was measured at the IF bonding pad. The setup uses a commercial Vector Network Analyzer (VNA) with sensitivity enhancements to increase the dynamic range and allow low-power-one-port reflection coefficient (ΓIF) measurements. A coupler inside the VNA is bypassed and replaced with an equivalent cold coupler inside the cryostat. The bias to the mixer is provided through the IF isolator. A cryogenic low noise amplifier (CLNA) in the return path to the VNA increases its dynamic range. One-port calibration standards (short, open, 50 Ω) are used, and the impedance is de-embedded from the calibration reference plane to the IF bonding pad of the mixer chip using the proprietary Automatic Fixture Removal (AFR) capability of the Keysight Technologies VNA. This approach allows direct measurement of the amplitude and phase of ΓIF and hence ZIF, from 2 to 16 GHz with very low power levels at the device under test. The measured results are compared with the predictions made from combining Tucker's quantum mixer theory with electromagnetic model of the mixer.

25 June 2013 in arXiv
Verified
Preprint
Open access
PDF file
AKAnthony Kerr
Anthony Kerr
SPShing-Kuo Pan
Shing-Kuo Pan
SCStéphane M. X. Claude
Stéphane M. X. Claude
PDPhilip Dindo
Philip Dindo
ALArthur W Lichtenberger
Arthur W Lichtenberger
ELEugene F. Lauria
Eugene F. Lauria
As the Atacama Large Millimeter/submillimeter Array (ALMA) nears completion, 73 dual-polarization receivers have been delivered for each of Bands 3 (84-116 GHz) and 6 (211-275 GHz). The receivers use sideband-separating superconducting Nb/Al-AlOx/Nb tunnel-junction (SIS) mixers, developed for ALMA to suppress atmospheric noise in the image band. The mixers were designed taking into account dynamic range, input return loss, and signal-to-image conversion (which can be significant in SIS mixers). Typical SSB receiver noise temperatures in Bands 3 and 6 are 30 K and 60 K, resp., and the image rejection is typically 15 dB.