The current state-of-the-art approach for SIS junction fabrication is based on magnetron sputtering and the Gurvitch Al overlayer trilayer process where an Al overlayer is deposited onto the Nb base electrode in order to subsequently grow a critical ~1 nm AlOx or AlN tunnel barrier. While the switch from AlOx to AlN barriers has significantly increased the achievable critical current density, and significant research has been performed to understand and optimize ICP AlN growth, the use of Nb electrodes provides an upper limit to the frequency range for low-noise operation when employed in THz mixer applications, and has lead to the study and use of alternative materials with higher transition temperatures (Tc) such as NbN and NbTiN. The Nb electrodes also impose stringent cooling requirements, replacement of both electrodes with higher Tc materials can increase the required device operating temperature to 10 K, thus reducing the power consumption of the refrigeration system, a building block for the realization of more energy efficient superconducting computing systems, such as those based on single-flux-quantum (SFQ) logic [6], [7], [8], [9]. In this work, we have departed from conventional SIS material growth techniques through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD) - that offers unique capabilities to tailor materials and interfaces. Using RBTIBD technology, we have realized the first ever NbTiN/AlN/NbTiN SIS junctions with highest yet reported sum-gap voltages exceeding 5.0 mV, potentially extending the theoretical limit of low-loss SIS mixing applications beyond 1.2 THz and relaxing the cooling requirements for superconducting device applications.
9 April 2019 in IEEE Transactions on Applied Superconductivity
Nb-based superconducting alloys, such as NbN and NbTiN, can have a superconducting energy gap near twice that of elemental Nb, thus, being ideal candidates for low-loss superconducting circuits operating above the gap frequency of Nb. We are particularly interested in these materials for THz-frequency superconducting-insulating-superconducting (SIS) mixers, kinetic inductance detectors, and traveling wave kinetic inductance parametric amplifier devices. We recently reported the use of an alternative synthesis technique, reactive bias target ion beam deposition (RBTIBD), used to realize high-quality NbTiN films and high-energy gap NbTiN/AlN/NbTiN SIS heterostructures. In this paper, the effect of post-deposition annealing on the electrical and structural properties of room temperature deposited RBTIBD NbTiN was investigated. Our room temperature RBTIBD NbTiN films were annealed using rapid thermal annealing from 200 to 1000 $^\circ$ C. The change in structural and electrical properties was characterized by X-ray diffraction, atomic force microscopy, and four-point probe measurements. The annealed films demonstrated an enhancement in transition temperature (T $_c$ ), increased crystallinity, larger grain size, and significantly reduced intrinsic stress.
2 July 2020 in IEEE Transactions on Terahertz Science and Technology
A proof-of-concept demonstration of on-wafer electronic calibration in the submillimeter-wave band (325—500 GHz) is presented. A GaAs Schottky diode shunting a coplanar transmission line is employed as an electronic standard that is tuned by bias applied through wafer probes. Error-corrected scattering parameter measurements, based on a Thru-Reflect-Line (TRL) calibration are used to characterize the on-wafer diode and establish it as a standard for electronic calibration. Subsequently, ensembles of measurements from a multiline TRL calibration and the diode calibration standard are performed and compared to assess the uncertainty associated with the two approaches. It is found that the error coefficients estimated using the electronic standard are in good agreement with those found from the multiline TRL calibration. Moreover, the electronic standard exhibits a significant reduction in uncertainty compared with the TRL standards, consistent with previous work showing that error in probe placement between measurements was a principle source of uncertainty for TRL-based calibration.
30 November 2023 in IEEE Transactions on Applied Superconductivity
Nb-based circuits have broad applications in quantum-limited photon detectors, low-noise parametric amplifiers, superconducting digital logic circuits, and low-loss circuits for quantum computing. The current state-of-the-art approach for superconductor-insulator-superconductor (SIS) junction material is the Gurvitch trilayer process based on magnetron sputtering of Nb electrodes with Al-Oxide or AlN tunnel barriers grown on an Al overlayer (Gurvitch et al., 1983). However, a current limitation of elemental Nb-based circuits is the low-loss operation of THz circuits operating above the 670 GHz gap frequency of Nb and operation at higher temperatures for projects with a strict power budget, such as space-based applications. NbTiN is an alternative higher energy gap material and we have previously reported on the first NbTiN/AlN/NbTiN SIS junctions with an epitaxially grown AlN tunnel barrier (Cyberey et al., 2019). One drawback of a directly grown tunnel barrier compared to thermal oxidation is control of the barrier thickness and the uniformity of thickness across a substrate, leading to variations in current density (J $_{c}$ ). Semiconductor barriers with smaller barrier heights enable thicker tunnel barriers for a given J $_{c}$ (Kroger et al., 1981). GaN is an alternative semiconductor material with a closed-packed Wurtzite crystal structure similar to AlN and it can be epitaxially grown as a tunnel barrier using the Reactive Bias Target Ion Beam Deposition (RBTIBD) technique. This work presents the preliminary results of the first reported high-quality NbTiN/GaN/NbTiN heterojunctions with underdamped SIS I(V) characteristics.
7 January 2015 in IEEE Transactions on Applied Superconductivity
High quality, low-leakage superconductor-insulator-superconductor (SIS) junctions with Nb electrodes and aluminum oxide barriers are widely reported in the literature, and have become integral in the design and fabrication of various superconducting circuits. However, as current densities are increased, aluminum oxide based tunnel barriers show excess leakage currents due to defects and pinholes in the barrier layer. First reported by our group in 2007, AlN tunnel barriers grown via inductively coupled plasma (ICP) nitridation of Al overlayers are a promising alternative, producing low-leakage Nb/Al-AlN/Nb SIS junctions, with current densities in excess of 30 kA/cm2. A correlation between junction quality and plasma dissociation has been reported for Nb/Al-AlN/Nb junctions produced via an electron cyclotron resonance (ECR) plasma. In this work, a quantitative measure of the relative dissociation (RD) of an ICP is determined through the use of a commercially available Ocean Optics USB4000 Optical Spectrometer. The effects of various ICP parameters on the RD, and a correlation between the RD and quality of the resulting Nb/Al-AlN/Nb junctions are reported.