The free section of prestressed anchor cable is a weak part of support. A new supporting structure named Anchor Cable and C‐Shaped Tube, which can bear transverse shear force, solves the problem that rock bolt and anchor cable are prone to shear failure in the free section and also solves the contradiction between high preload and low shear bearing capacity of support materials. Double‐shear tests of Anchor Cable and C‐Shaped Tube with smooth joint planes were carried out. Double‐shear tests were carried out on the anchor cables with the diameter of 21.6 mm and the same type of Anchor Cable and C‐Shaped Tube under different preload conditions. The influence of the preload on the shear performance of supporting materials and the enhancement effect of Anchor Cable and C‐Shaped Tube supporting structure on the shear performance of anchor cables were analyzed. The test results confirm that Anchor Cable and C‐Shaped Tube can improve the transverse shear resistance of the supporting material and increase the axial ultimate bearing capacity of the anchor cable during the shearing process. It is found that, during the double‐shear test, the fracture form of the supporting materials is tensile fracture, and when it is sheared, Anchor Cable and C‐Shaped Tube can reduce the stress concentration of the interaction between the joint surface and the surrounding rock and reduce the damage to the surrounding rock.
In view of the complex asymmetric deformation characteristics of inclined coal seam roadways and the tensed shear failure of anchor cable supports, the asymmetric support scheme of an anchor cable with a C-shaped tube is proposed. In order to study its supporting effect on an inclined coal seam roadway, this paper first explores the difference in shear performance between an anchor cable with a C-shaped tube and an anchor cable through double shear tests. Then, based on the asymmetric deformation characteristics of an inclined coal seam roadway in the Pangpangta Mine, a numerical simulation is used to study the asymmetric support effect of an anchor cable with a C-shaped tube in an inclined coal seam roadway. The results of the double shear test show that the anchor cable with the C-shaped tube has stronger resistance to shear load than that of the anchor cable. Through the results of the numerical simulation, the original stress field distribution on both sides of the roadway was found to be uneven due to the influence of the coal seam dip angle, and after the excavation of the inclined coal seam roadway, the displacement and plastic zone distribution on both sides showed obvious asymmetric characteristics. Compared with the symmetric support, the asymmetric support can obviously alleviate the asymmetric deformation characteristics of the two sides and effectively control the deformation and plastic failure zone of the roadway. The anchor cable with the C-shaped tube has better resistance to shear deformation than that of the anchor cable. The anchor cable with the C-shaped tube can reduce the deformation and plastic area of the roadway more effectively.
3 February 2021 in Geotechnical and Geological Engineering