Kenzhegali Smailov

Prof. Kenzhegali Smailov


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2024 in Metals
Verified
Journal Article
Open access
PDF file
BKBagdaulet Kenzhalievich Kenzhaliyev
Bagdaulet Kenzhalievich Kenzhaliyev
TSTatiana Surkova
Tatiana Surkova
ABAinur Berkinbayeva
Ainur Berkinbayeva
ZBZhazira Baltabekova
Zhazira Baltabekova
KSKenzhegali Smailov
Kenzhegali Smailov
This article presents a cutting-edge approach to microwave-assisted processing aimed at enhancing the efficiency of zinc extraction from materials characterized by a high degree of processing complexity. The described technique encompasses two sequential phases: phase transformation under microwave irradiation and leaching in sulfuric acid at ambient temperature. During the phase transformation, implemented through the application of microwave energy, insoluble zinc phases undergo a controlled transition. The experimental results confirm that microwave calcination at 600 °C for 5–7 min is effective for converting ZnS to ZnO without the formation of ZnO∙Fe2O3. Zinc extraction from the clinker reached 46.47% after treatment with microwave radiation at a power of 25 kW for the specified duration. Thus, this study opens up prospects for environmentally friendly zinc extraction from challenging-to-process resources.

25 March 2020 in Chemical Bulletin of Kazakh National University
Verified
Journal Article
Open access
KOKhabibulla Ospanov
Khabibulla Ospanov
KSKenzhegali Smailov
Kenzhegali Smailov
YNYeldar Nuruly
Yeldar Nuruly
This article considers general principle of predicting the difference in the reactivity of minerals and solvents in the conditions of their interaction at the interface between solid and liquid for cobalt minerals in the processing of mineral raw materials. The ideas of new properties of chemical affinity which allowed to carry out the forecast of a choice of efficiency of action of the dissolving reagent for opening of hardly soluble minerals of cobalt and the forecast of consecutive passing of the competing reaction proceeding on solid-liquid boundary at processing of mineral raw materials by a hydrochemical method at the level of an electron are stated. Previously unknown pattern of change the effectiveness of the solvent of the reagents and the sequence of passing a competing reaction was established, namely, that the effectiveness of the solvent of the reagent and the sequence of passing the subsequent reaction naturally varies with the calculated values given new chemical affinity (DrG0/n). It is practically proposed to use the average atomic energy of the formation of solids ΔfG0(averaged) and calculated value of the new chemical affinity DrG0/n to create scientific basis for the opening of cobalt minerals contained in the mineral raw materials with the least time.

25 February 2025 in Metals
Verified
Journal Article
Open access
PDF file
BKBagdaulet Kenzhalievich Kenzhaliyev
Bagdaulet Kenzhalievich Kenzhaliyev
TSTatiana Surkova
Tatiana Surkova
ABAinur Berkinbayeva
Ainur Berkinbayeva
ZBZhazira Baltabekova
Zhazira Baltabekova
KSKenzhegali Smailov
Kenzhegali Smailov
ZDZamzagul Dosymbaeva
Zamzagul Dosymbaeva
This study presents an innovative approach to processing refractory zinc-bearing clinker through the synergistic application of microwave thermal treatment and ultrasonic-assisted leaching. Microwave irradiation induces phase transformations in the clinker, improving its reactivity and facilitating subsequent zinc dissolution, while ultrasonic cavitation enhances mass transfer by disrupting passivation layers. Key process parameters, including acid concentration, temperature, pulp density, and leaching time, were systematically investigated using response surface methodology (RSM) and central composite design (CCD). The results demonstrate that the optimized process conditions led to a significant increase in zinc recovery from refractory materials.

7 November 2024 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Closed access
IJInstitute of Metallurgy and Ore Beneficiation JSC
Institute of Metallurgy and Ore Beneficiation JSC
Rinat Anvarbekovich AbdulvaliyevRinat Anvarbekovich Abdulvaliyev
Rinat Anvarbekovich Abdulvaliyev
SUSatbayev University
Satbayev University
TST.YU. Surkova
T.YU. Surkova
IUInstitute of Metallurgy and Ore Beneficiation JSC; Satbayev University
Institute of Metallurgy and Ore Beneficiation JSC; Satbayev University
ABA.N. Berkinbayeva
A.N. Berkinbayeva
The decrease in the quality of mineral raw materials processed by industry, as well as the increase in requirements for environmental protection, necessitate the development of new directions in the technology of their processing. Biogeotechnology refers to one of the modern areas of scientific and technological progress in the field of processing mineral raw materials. Biologically active additives are increasingly used along with the use of microorganisms in the extraction processes for non-ferrous and precious metals, in particular amino acids which are an integral part of the culture liquid of microorganisms. The processes of sulfuric acid leaching of copper from low-grade ore in the presence of amino acids of different structures and their effect on copper electrolysis were studied. Low-grade ore from one of the Kazakhstan deposits was used as the starting raw material. The copper content in the ore is 0.39%. The diffusion nature of the restrictions was established during the study of the kinetics of the process of sulfuric acid leaching of copper, and the rate constants and value of the effective activation energy were calculated, which amounted to 1.817 kJ/mol. The effect of amino acids with different structures on the leaching process was studied. The positive effect was increased in the glycine - leucine - cysteine - histidine - asparagine series. Depending on the structure of the amino acid, the degree of copper extraction into the solution increases in the range of 1-15%. The effect of aminoacetic acid as a biologically active additive on the process of electrolysis of copper from poor solutions was studied. It was established that the process is inhibited by the reduction of monovalent copper to the metallic state in the presence of glycine.

26 March 2025 in Processes
Verified
Journal Article
Open access
PDF file
BKBagdaulet Kenzhalievich Kenzhaliyev
Bagdaulet Kenzhalievich Kenzhaliyev
Dametken Yedilovna FischerDametken Yedilovna Fischer
Dametken Yedilovna Fischer
STSaniya Temirova
Saniya Temirova
AUAlmagul Amirovna Ultarakova
Almagul Amirovna Ultarakova
ZBZhazira Baltabekova
Zhazira Baltabekova
KSKenzhegali Smailov
Kenzhegali Smailov
Hexavalent chromium Cr (VI) compounds present in ilmenite concentrate not only pose significant environmental hazards due to their toxicity but also complicate further processing, interfering with technological operations in industrial production. The high chromium content in ilmenite concentrates hinders their conversion into titanium-containing slag, necessitating the removal of chromium ions to permissible residual levels to produce titanium dioxide. In this study, various sorbents were investigated for the removal of chromate ions from the industrial effluents generated during ilmenite concentrate processing. The sorbents examined included natural and modified diatomite, activated carbon, taurite (shungite), and the ion-exchange resin Lewatit M500. The structures of both natural and modified diatomite were analyzed using scanning electron microscopy (SEM). It was determined that natural diatomite samples consist of diatom frustules of various shapes and their fragments, with structural element sizes ranging from submicron dimensions to 50 µm. A mathematical analysis of the sorption data for hexavalent chromium ion removal from solutions was performed. The results demonstrated high sorption efficiencies for Lewatit M500 (98.34%) and diatomite modified with iron compounds (98.95%). The findings suggest that diatomite is a promising sorbent for chromate ion removal from wastewater due to its availability and potential for chemical modification.

11 October 2025 in Metals
Verified
Journal Article
Open access
PDF file
AYAzamat Yessengaziyev
Azamat Yessengaziyev
ZKZaure Baitaskyzy Karshyga
Zaure Baitaskyzy Karshyga
AYAlbina Yersaiynova
Albina Yersaiynova
ATAisha Tastanova
Aisha Tastanova
KSKenzhegali Smailov
Kenzhegali Smailov
BOBauyrzhan Orynbayev
Bauyrzhan Orynbayev
The growing global demand for lithium, driven by its pivotal role in battery production, highlights the need for alternative technologies to recover this metal from low-grade and anthropogenic raw materials. This study investigates lithium extraction from aluminosilicate tailings of rare-metal production by sulfate roasting with concentrated sulfuric acid, followed by aqueous and hydrochloric acid leaching. Mineralogical analysis confirmed lithium mainly in muscovite and biotite (isomorphic substitutions) and partly as spodumene within the aluminosilicate matrix. The optimal parameters of thermochemical treatment were determined as 300 °C for 1 h at a liquid-to-solid ratio of 1:6. Subsequent aqueous leaching (90 °C, 1 h, L/S = 6:1) achieved a lithium recovery of 82.3%, while HCl proved less effective. Using response surface methodology (RSM) and a central composite design (CCD), a regression model was developed predicting up to 93.4% lithium extraction at 90 °C, a liquid-to-solid ratio of 10:1, and a leaching duration of 75 min. The calculated values showed good agreement with experimental data obtained at 90 °C, L/S = 10:1, and 30 min leaching, yielding 91.92% lithium recovery. These results confirm the efficiency of the proposed thermochemical approach and provide a scientific foundation for its further development and industrial scale-up.