In structural health monitoring crack detection and its width measurement are important monitored parameters. The Crack Mouth Opening Displacement (CMOD) is a good indicator of fracture properties. A new kind of CMOD gauge is shown in the paper, it is a wireless sensor tag based on off-the-shelf Ultra High Frequency (UHF) Radio Frequency Identification (RFID) technology. The sensor measures the opening of the crack as a variation of the phase of the signal backscattered from an RFID tag connected to a load sensible to the change of the crack width. The novelty of the sensor design relies on an electromagnetic method that permits to enhance both the communication stability and the sensitivity of the RFID tag. The paper shows the electromagnetic theory underlying the design procedure, the method for dimensioning the sensor tag, the realization of a prototype and its experimental measurements. Theoretical and experimental results show that the sensor has a tunable sensitivity with minimum value 16°/mm, a maximum range of 5 mm, a nominal resolution better than 187 µm and a measurement uncertainty less than ±250µm while it allows a reading distance longer than 1.5 meters.
This paper reports a novel investigation in applying commercial Ultra High-Frequency RFID tags (UHF-RFID tags), which are widely used in logistics as sensing elements in civil engineering structures, particularly for monitoring out-of-plane displacements of brick masonry walls. Both laboratory tests and in situ experimental tests assessed the feasibility of the proposed application. Laboratory tests showed a very satisfactory response while the in situ experiments showed a weaker response. Nevertheless, the potential reliability of the proposed technique can be stated. The authors traced back the causes of the performance decrease to environmental interference, mainly due to the extensive presence of a rigid steel frame surrounding the out-of-plane loaded panels. Measurements of displacements, in fact, are obtained indirectly from the phase of UHF-RFID signals that strongly suffer from multipath generated by metallic surfaces. Despite some limitations, the proposed measurement technique permits a reliable and sustainable approach to the monitoring of structures. The use of commercial UHF-RFID wireless tags, in fact, assures easy and fast installation operations and assures the possibility of placing a large number of sensors over the structure with very low maintenance costs with respect to the more traditional monitoring techniques. Moreover, using very thin and small commercial UHR-RFID tags on cultural heritage structures can represent an opportunity for sustainable long-time monitoring with reduced costs. Overall, the results of this study are sufficiently satisfactory to be considered as the opening of new possible scenarios in wireless structural monitoring in the civil engineering field. The authors propose as future work to use UHF-RFID tags for the real-time monitoring of an existing masonry facade that, not being characterized by the presence of a steel frame, can potentially assure an adequate response and properly transmit the electromagnetic signal.
Radio frequency identification (RFID) technology has gained significant attention in various industry sectors due to its potential for efficient inventory management, asset tracking, and object localization. Different RFID technologies are available; resorting to harmonic signals is currently less used but, recently, has gained interest in research activity. In this study, we present the design, prototype realization, and performance evaluation of a dual-band dual-polarized harmonic tag. The tag incorporates a dual-band matching circuit utilizing a zero-bias Schottky diode HSMS-2850 connected to a perturbed annular ring patch antenna. The antenna, in fact, is able to radiate in cross-polarization at the higher frequency. Through a comprehensive design methodology, including simulation optimization and prototype fabrication, we demonstrate the successful implementation of the tag. Measurements to validate the impedance matching properties, radiation patterns, and backscattering capability of the tag are also shown.