Natural fiber composites have been extensively studied for structural applications, with recent exploration into their potential for various uses. This study investigates the impact of chemical treatments on the properties of Brazilian jute woven fabric/polyester resin composites. Sodium hydroxide, hydrogen peroxide, and peracetic acid were utilized to treat the jute fabrics, followed by resin transfer molding (RTM) to form the composites. Evaluation included water absorption, flexural strength, tensile strength, and short-beam strength. The alkaline treatment induced changes in the chemical composition of the fibers’ surface. Chemical treatments resulted in increased flexural and short-beam strength of the composites, with no significant alterations in tensile properties. The hydrogen peroxide treatment exhibited lower water absorption, suggesting its potential as a viable option for enhancing the performance of these composites.

Physical and mechanical performance of natural fiber composites can be tailored by hybridizing with synthetic fibers. Jute fibers are promising and highly available at a low cost in some countries, and they have been used in several applications, with the extra benefit of helping socially depressed people who commonly explore this plant. This work investigates the effect of hybridization on the properties of jute/glass and jute/carbon laminates with polyester resin. Nine different laminates were manufactured by vacuum infusion using unidirectional jute, E-glass, and carbon fabric reinforcements. Tensile, flexural, and short beam tests were performed in accordance with ASTM standards. The hybrid composites showed generally intermediate properties compared to the non-hybrid two-component laminates. The mechanical properties of the hybrid composites were 50–75% smaller than those of their respective pure glass and pure carbon composites, but 30–300% higher compared to the pure jute composite. Among the hybrids, the number of layers of the synthetic fiber played the most important role on properties, rather than the layup. That is, the variation in the number of jute fabrics may produce the required combination of stiffness and strength for different applications. Besides, the hybrid laminates, with more layers of synthetic fibers showed better hygroscopic performance.