Jiawei Cheng

Mr. Jiawei Cheng


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2024 in Buildings
Verified
Journal Article
Open access
PDF file
QYQingguo YANG
Qingguo YANG
LZLiuyuan Zeng
Liuyuan Zeng
HWHonghu Wang
Honghu Wang
RXRui Xiang
Rui Xiang
LGLongfei Guan
Longfei Guan
JCJiawei Cheng
Jiawei Cheng
This study assesses the influence of extra-short extra-fine steel fibers on the performance of self-compacting concrete (SCC) modified with fly ash. Replacing standard steel fibers with volume fractions ranging from 0%, 1.5%, 3%, 5% and 6%, the study optimizes the mix design for enhanced workability and mechanical properties. The findings reveal that, although the addition of steel fibers had a negative effect on the flowability, the cohesion is significantly improved, providing a basis for a significant improvement in the mechanical properties. The optimal fiber content is identified at 5%, achieving the highest compressive strength of 71.7 MPa, split tensile strength of 8.2 MPa, and flexural strength of 12.8 MPa at 28 d. However, further increases in fiber content beyond 5% lead to a deceleration in compressive and splitting tensile strength improvement and a 27.5% drop in flexural strength at 28 d. The study also emphasizes the good dispersion within the concrete, which helps to enhance its ductility and crack resistance, to some extent.

2 June 2025 in Fibers
Verified
Journal Article
Open access
PDF file
QYQingguo YANG
Qingguo YANG
WYWujing Yin
Wujing Yin
JCJiawei Cheng
Jiawei Cheng
YLYa Li
Ya Li
YZYu Zhou
Yu Zhou
YLYunhao Li
Yunhao Li
Taking AC-13 asphalt mixture as the matrix, this research delves into the impacts of assorted steel fibers on AC-13 asphalt mixture, especially the influence of 17.5 mm × 17.5 mm L-shaped steel fibers. A gradient design with mass dosages of 0%, 1%, 2%, and 3% was employed to evaluate the reinforcement effect of L-shaped steel fiber-reinforced asphalt mixture compared with conventional mixture. Also, comparative analysis between L-shaped and straight steel fibers was conducted through comprehensive mechanical performance tests, including the Marshall stability test, high-temperature wheel tracking test, low-temperature beam bending test, freeze–thaw splitting strength test, and immersion Marshall test. The results demonstrate that L-shaped steel fibers significantly improve the comprehensive mechanical properties of asphalt mixture compared to conventional asphalt mixture, showing remarkable improvements in high-temperature stability, low-temperature crack resistance, and water stability. The overall performance enhancement effect increases by approximately 20%. Compared with straight steel fibers, the performance improvement of the mixtures is slightly greater, with the optimal performance achieved at 2% mass dosage. The standard deviation and coefficient of variation are used to reflect the degree of data dispersion. The results show that the data of L-shaped steel fibers have relatively smaller fluctuations, being more uniform and stable.

7 December 2023 in Construction Materials
Verified
Journal Article
Open access
PDF file
QYQingguo Yang
Qingguo Yang
HWHonghu Wang
Honghu Wang
LZLiuyuan Zeng
Liuyuan Zeng
LGLongfei Guan
Longfei Guan
JCJiawei Cheng
Jiawei Cheng
RXRui Xiang
Rui Xiang
The addition or substitution of various gel materials in cement-based composites has been proven to be an effective approach in enhancing the performance of concrete. Current research focuses mainly on enhancing the toughness of concrete, but lacks discussion on the performance of alternative gel materials. Therefore, this study aims to explore the effects of partially substituting cement with fly ash and slag powder as gel materials, while incorporating a high volume fraction of micro-steel fibers (6%), on the workability and mechanical properties of self-compacting concrete. By means of rigorous experimental investigation and meticulous analysis, we comprehensively assessed the workability characteristics of self-compacting concrete, encompassing critical aspects such as filling ability, cohesion, and permeability. Additionally, we conducted an extensive evaluation of the mechanical attributes of self-compacting concrete, encompassing vital parameters, such as compressive strength, axial compressive strength, splitting tensile strength, and flexural strength. Last but not least, through a holistic integration of workability and mechanical properties, we conducted a comprehensive performance evaluation of self-compacting concrete incorporating a synergistic blend of fly ash, slag powder, and micro steel fibers. The experimental results indicate that the composite addition of fly ash and slag powder in self-compacting concrete, while compatible with up to 6% micro-steel fibers, leads to a decrease in concrete workability and an increase in cohesiveness due to the addition of micro-steel fibers. Moreover, fly ash predominantly influences the tensile properties of concrete, while the addition of slag powder significantly affects the compressive and flexural properties of concrete. Additionally, the addition of micro-steel fibers significantly improves the overall mechanical properties of concrete.