Taking AC-13 asphalt mixture as the matrix, this research delves into the impacts of assorted steel fibers on AC-13 asphalt mixture, especially the influence of 17.5 mm × 17.5 mm L-shaped steel fibers. A gradient design with mass dosages of 0%, 1%, 2%, and 3% was employed to evaluate the reinforcement effect of L-shaped steel fiber-reinforced asphalt mixture compared with conventional mixture. Also, comparative analysis between L-shaped and straight steel fibers was conducted through comprehensive mechanical performance tests, including the Marshall stability test, high-temperature wheel tracking test, low-temperature beam bending test, freeze–thaw splitting strength test, and immersion Marshall test. The results demonstrate that L-shaped steel fibers significantly improve the comprehensive mechanical properties of asphalt mixture compared to conventional asphalt mixture, showing remarkable improvements in high-temperature stability, low-temperature crack resistance, and water stability. The overall performance enhancement effect increases by approximately 20%. Compared with straight steel fibers, the performance improvement of the mixtures is slightly greater, with the optimal performance achieved at 2% mass dosage. The standard deviation and coefficient of variation are used to reflect the degree of data dispersion. The results show that the data of L-shaped steel fibers have relatively smaller fluctuations, being more uniform and stable.
With the increase in heavy-load traffic and the growing frequency of extreme weather events, traditional rock aggregates, due to poor morphological stability, are unable to meet the performance requirements of high-grade asphalt pavements in complex environments. Most existing research on metal reinforcement focuses on fiber forms. This study innovatively introduces L-shaped multi-faceted metal aggregates (LFMAs). Through surface energy analysis and tests such as the Marshall test, rutting test, water immersion Marshall test, and freeze–thaw splitting test, the effects of the dosage and particle size of LFMAs on the performance of asphalt mixtures are explored. The results show that LFMAs can form an effective bond with SBS modified asphalt, improving the high-temperature stability and low-temperature crack resistance of asphalt mixtures. Under both water immersion and freeze–thaw conditions, the resistance of asphalt mixtures to water damage decreases with the increase in the dosage of metal aggregates. This research expands the application of three-dimensional metal aggregates, breaks through the limitations of fiber-based materials, and provides a new direction for the development of high-performance asphalt mixtures.