Ya Li

Dr. Ya Li

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2020 in AIP Advances
Verified
Journal Article
Open access
PDF file
ZYZhijian Yi
Zhijian Yi
YLYa Li
Ya Li
FHFeng Huang
Feng Huang
MWMin Wang
Min Wang
KSKang Su
Kang Su
JGJianyi Gu
Jianyi Gu
The Dugdale model is one of the most famous achievements in fracture mechanics due to its accurate predication of the size of the plastic zone at the crack tip in comparison with the experimental results. However, the Dugdale model is generally used for the analysis of infinite-width cracked plates, and it has not been successfully extended analytically for the analysis of finite-width cracked plates, which are more commonly seen in engineering structures. In this paper, the Dugdale model of finite-width cracked plates was analytically analyzed based on the crack line analysis method. Solving the plastic zone of the Dugdale model of a finite-width plate with a mode-I center crack was broken down into two problems of finite-width plates, and the analytical solutions of stress intensity factors of the two problems were obtained, respectively. Based on the superposition principle of stress intensity factors, the size of the plastic zone of the Dugdale model of a finite-width plate with a mode-I center crack was obtained. The results are in perfect consistency with the experimental values obtained by Dugdale himself, and the difference between the theoretical curve and the experimental values obtained by Dugdale was eliminated for the first time.

4 May 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
CZChaohua Zhao
Chaohua Zhao
YLYa Li
Ya Li
ZYZhijian Yi
Zhijian Yi
KSKang Su
Kang Su
The construction of steel deck pavements is still considered difficult worldwide, and interfacial bonding is a major factor influencing this construction. With the recent developments in the field of pavement materials, high-performance cement-based concrete is used to construct steel bridge deck pavements. However, ensuring adequate interface-bonding strength remains particularly complex and difficult. In this study, with the aim of striking the right balance between rigidity and flexibility, an interface-bonding material was formed using modified epoxy resin, cement, and rubber powder. Polymer lattice porous concrete was used as the paving material, and the interface-bonding effect was studied experimentally by employing three methods using the material: pull-off, dual-interface shear, and flexural tensile tests. The results showed that (1) the interface pull-off strength was higher than 4 MPa, that is, higher than twice that of epoxy asphalt pavements used currently on steel bridge decks, and the failure surface was located on the pavement material rather than on the bonding interface; (2) the interface flexural strength and tensile strength were significantly higher than those of epoxy asphalt at room temperature and those of the ordinary epoxy resin; (3) the dual-interface shear strength was nearly four times higher than that of epoxy asphalt. Therefore, the modified epoxy resin composite interface-bonding material suggested in this study is an excellent bonding material that can serve as a reference for interface-bonding of steel bridge deck pavements.

27 April 2025 in Buildings
Verified
Journal Article
Open access
PDF file
QYQingguo YANG
Qingguo YANG
YZYu Zhou
Yu Zhou
YLYa Li
Ya Li
KCKelin Chen
Kelin Chen
WYWujing Yin
Wujing Yin
YLYunhao Li
Yunhao Li
This study explores the influence of the water–cement ratio and fiber content in engineered cementitious composite (ECC) on the mechanical characteristics of foamed lightweight soil (FLS) through experimental analysis. Two types of cementitious materials—ECC and ordinary Portland cement (OPC)—were utilized to create FLS specimens under identical parameters to examine their mechanical performance. Results indicate that ECC-FLS exhibits superior toughness, plasticity, and ductility compared to OPC-FLS, validating the potential of ECC as a high-performance material for FLS. To assess the influence of the ECC water–cement ratio, specimens were constructed with varying ratios at 0.2, 0.25, and 0.3, while maintaining other parameters as constant. The experimental results indicate that as the water–cement ratio of ECC increases, the flexural strength, compressive strength, flexural toughness, and compressive elastic modulus of the lightweight ECC-FLS gradually increase, exhibiting a better mechanical performance. Moreover, this study investigates the effect of basalt fiber content in ECC on the mechanical properties of FLS. While keeping other parameters constant, the volume content of basalt fibers varied at 0.1%, 0.3%, and 0.5%, respectively. The experimental results demonstrate that within the range of 0 to 0.5%, the mechanical properties of FLS improved with increasing fiber content. The fibers in ECC effectively enhanced the strength of FLS. In conclusion, the adoption of ECC and appropriate fiber content can significantly optimize the mechanical performance of FLS, endowing it with broader application prospects in engineering practices. ECC-FLS, characterized by excellent ductility and crack resistance, demonstrates versatile engineering applications. It is particularly suitable for soft soil foundations or regions prone to frequent geological activities, where it enhances the seismic resilience of subgrade structures. This material also serves as an ideal construction solution for underground utility tunnels, as well as for the repair and reconstruction of pavement and bridge decks. Notably, ECC-FLS enables the resource utilization of industrial solid wastes such as fly ash and slag, thereby contributing to carbon emission reduction and the realization of a circular economy. These attributes collectively position HDFLS as a sustainable and high-performance construction material with significant potential for promoting environmentally friendly infrastructure development.

2 June 2025 in Fibers
Verified
Journal Article
Open access
PDF file
QYQingguo YANG
Qingguo YANG
WYWujing Yin
Wujing Yin
JCJiawei Cheng
Jiawei Cheng
YLYa Li
Ya Li
YZYu Zhou
Yu Zhou
YLYunhao Li
Yunhao Li
Taking AC-13 asphalt mixture as the matrix, this research delves into the impacts of assorted steel fibers on AC-13 asphalt mixture, especially the influence of 17.5 mm × 17.5 mm L-shaped steel fibers. A gradient design with mass dosages of 0%, 1%, 2%, and 3% was employed to evaluate the reinforcement effect of L-shaped steel fiber-reinforced asphalt mixture compared with conventional mixture. Also, comparative analysis between L-shaped and straight steel fibers was conducted through comprehensive mechanical performance tests, including the Marshall stability test, high-temperature wheel tracking test, low-temperature beam bending test, freeze–thaw splitting strength test, and immersion Marshall test. The results demonstrate that L-shaped steel fibers significantly improve the comprehensive mechanical properties of asphalt mixture compared to conventional asphalt mixture, showing remarkable improvements in high-temperature stability, low-temperature crack resistance, and water stability. The overall performance enhancement effect increases by approximately 20%. Compared with straight steel fibers, the performance improvement of the mixtures is slightly greater, with the optimal performance achieved at 2% mass dosage. The standard deviation and coefficient of variation are used to reflect the degree of data dispersion. The results show that the data of L-shaped steel fibers have relatively smaller fluctuations, being more uniform and stable.

1 January 2020 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
YLYa Li
Ya Li
FHFeng Huang
Feng Huang
MWMin Wang
Min Wang
CZChaohua Zhao
Chaohua Zhao
ZYZhijian Yi
Zhijian Yi
By using the crack line analysis method, this paper carries out an elastic‐plastic analysis for mode I cracks under plane stress condition in an elastic perfectly plastic solid and obtains the general form of matching equations of the elastic stress field and the plastic stress field near the crack line in rectangular coordinate form. The analysis in rectangular coordinates in this paper avoids the conversion from rectangular coordinates into polar coordinates in the existing analysis and greatly simplifies the power series forms of the elastic stress field and plastic stress field near the crack line during the solving process. Furthermore, by focusing on a new problem, i.e., the center‐cracked plate with finite width under unidirectional uniform tension, this paper obtains the elastic stress field, plastic stress field, and the length of the elastic‐plastic boundary near the crack line by using the general form of the solution. When the dimensions of the plate tend to be infinite, the results of this paper are consistent with those obtained for an infinite plate with a mode I crack. Furthermore, the variation curves of the length of the elastic‐plastic boundary are also delineated in different sized center‐cracked plates, and the results are compared with those obtained under the small‐scale yielding conditions. The solving process and the results in this paper abandon the small‐scale yielding conditions completely. The method used in this paper not only makes the solving process simpler during the elastic‐plastic analysis near the crack line but also enriches the crack line analysis method.

26 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
QYQingguo YANG
Qingguo YANG
KCKelin Chen
Kelin Chen
LGLongfei Guan
Longfei Guan
YLYa Li
Ya Li
YLYunhao Li
Yunhao Li
WYWujing Yin
Wujing Yin
With the increase in heavy-load traffic and the growing frequency of extreme weather events, traditional rock aggregates, due to poor morphological stability, are unable to meet the performance requirements of high-grade asphalt pavements in complex environments. Most existing research on metal reinforcement focuses on fiber forms. This study innovatively introduces L-shaped multi-faceted metal aggregates (LFMAs). Through surface energy analysis and tests such as the Marshall test, rutting test, water immersion Marshall test, and freeze–thaw splitting test, the effects of the dosage and particle size of LFMAs on the performance of asphalt mixtures are explored. The results show that LFMAs can form an effective bond with SBS modified asphalt, improving the high-temperature stability and low-temperature crack resistance of asphalt mixtures. Under both water immersion and freeze–thaw conditions, the resistance of asphalt mixtures to water damage decreases with the increase in the dosage of metal aggregates. This research expands the application of three-dimensional metal aggregates, breaks through the limitations of fiber-based materials, and provides a new direction for the development of high-performance asphalt mixtures.