This study aimed to assess the efficiency of the use of α-pinene and essential oils of Gaultheria procumbens, Juniperus communis, Protium heptaphyllum, and Protium pallidum in treating corn seeds (Zea mays) under storage conditions for the management of Sitophilus zeamais. Contact toxicity, fumigation, repellency, persistence, and residual effects of the targeted essential oil and phytocompound on germination were performed. G. procumbens oil, high in methyl salicylate (96%), was the most toxic in contact tests, with an LC₅₀ of 26.83 µL/20 g. P. heptaphyllum oil, containing 40.1% limonene, was the second most toxic with an LC50 of 45.78 μL/20 g. When test separately, α-pinene was more toxic than J. communis oil, which has 67% α-pinene. P. pallidum oil, with 31.17% o-cimene, also showed toxicity. In fumigation tests, the toxicity order was G. procumbens ≥ P. heptaphyllum > α-pinene > J. communis > P. pallidum. All products were repellent. G. procumbens had the longest persistence (71 days), while J. communis and α-pinene had shorter persistence. J. communis oil and α-pinene did not affect corn seed germination or vigor. The findings are crucial for managing S. zeamais in stored maize and determining the appropriate use of natural insecticides without affecting their ability to germinate and grow.

Zinc (Zn) is crucial for both plant metabolism and human nutrition, with its deficiency being a global health concern. Strategies to increase its availability in food, such as agronomic biofortification, have gained prominence. This study evaluated the impact of foliar spraying of Zn [at full bloom stage: 0 (control) and 600 g ha⁻¹, as ZnSO₄⋅7H₂O] on the nutritional quality of cowpea (Vigna unguiculata L. Walp.) grains. Field experiments involving 20 cowpea genotypes were carried out over two seasons in a Typic Quartzipsamment under a no-tillage system. The photosynthetic responses of cowpea plants and the concentrations of Zn, amino acids, sucrose, total sugars, and storage proteins (glutelin, albumin, prolamin, and globulin) in grains were analyzed. All genotypes showed enrichment of Zn in grains in response to ZnSO₄⋅7H₂O application compared to untreated plants. Foliar spraying of ZnSO₄⋅7H₂O during initial grain filling was ideal for increasing Zn concentration in grains and improving plant physiological processes. Additionally, Zn fertilization led to higher concentrations of storage and total amino acids and proteins in the grains, supporting the rational application of Zn in cowpea production to improve the nutritional quality of grains and increase plant productivity.

Zinc deficiency is a major contributor to hidden hunger, affecting billions of people worldwide, particularly in vulnerable populations. Agronomic biofortification with zinc is a promising strategy to increase both crop productivity and the nutritional quality of food, especially in countries like Brazil, where tropical soils are often deficient in this micronutrient. This review analyzes the main technologies applied in the zinc biofortification of edible crops in Brazil, including fertilizer types, application methods, doses, and the use of innovative approaches such as nano-fertilizers and biofertilizers. The results show that the foliar application of zinc sulfate at doses of 600 g ha⁻¹ increased zinc concentration in grains by 25–40% without reducing crop yields. Additionally, the use of zinc nanoparticles increased wheat grain zinc content by up to 30% and biomass production, while biofertilizer application with diazotrophic bacteria raised zinc concentration in maize grains by 12.7–18.2%. These technologies demonstrate potential for enhancing zinc use efficiency and improving the nutritional quality of crops. Standardizing biofortification practices is essential to maximize their impact on food and nutritional security, contributing to the prevention of zinc deficiency in human populations.

The study of drying kinetics is fundamental for making the correct choice of time and temperature to be used in the drying process. In addition, mathematical modeling enables the simulation, optimization, sizing, and determination of the commercial application of the drying system. Therefore, the objective of this study was to investigate the kinetics and mathematical modeling of the drying process of macaúba almond [Acrocomia aculeata (Jacq.) Lodd. ex Mart] performed at different temperatures. For this purpose, the drying was performed under three different temperatures: 40 °C, 50 °C, and 60 °C. Four repetitions were performed for each temperature. The experimental data were fitted by nine different mathematical models. The choice of the best model was based on the following statistical parameters: magnitude of the adjusted coefficient of determination, magnitude of the mean relative error, and standard error of the estimate. It was observed that an increase in the drying temperature resulted in a reduction of drying time. The shortest drying time was observed in the treatment performed under 60 °C in which the almonds attained equilibrium moisture content at 34.08 h. The longest drying time was observed in the treatment performed under 40 °C, with the almonds attaining equilibrium moisture content at 404.40 h. Approximation of Diffusion, Midilli, Page, and Modified Page were the models that best described the drying process of macaúba almonds with the aim of subsidizing the design of industrial dryers.

Nowadays, the modified atmosphere with ozone is one of the main alternatives for controlling insect pests in stored grains, as it allows grain quality to be maintained while causing no environmental damage. In light of this, the purpose of this study was to assess the toxicity of ozone to C. maculatus in cowpea grains as well as how it affects the physiological and physical properties of the grains. The toxicity was determined by estimating lethal doses (mg/g) at the top and bottom of the fumigation chamber for 50% and 95% of adult insects (LD₅₀ and LD₉₅). Cowpea grain samples were removed after being exposed to ozone, and the effect of ozonation on the physical and physiological quality of the grains was assessed. The electrical conductivity, water content, and germination were all examined in this manner. The lethal doses LD₅₀ were 65.97 and 45.52 mg/g when the insects were distributed at the top and bottom of the fumigation chamber, respectively. As a result, ozone toxicity was higher at the bottom than at the top. The increase in ozone doses resulted in a decrease in water content. The germination rate exceeded 90% in both locations where ozone was applied. The electrical conductivity remained constant, ranging between 152.01 and 239.59 S cm⁻¹ g ⁻¹. The findings indicate that ozone is toxic to C. maculatus but has no effect on grain quality. Ozone may therefore be used to manage C. maculatus in cowpea that has been stored.

Macauba fruits are oil-rich drupes with high moisture content at harvest. This feature can affect the chemical properties of the oil and increase the costs of biodiesel production. Therefore, it is necessary to adopt postharvest strategies to ensure oil quality. The aim of this work was to evaluate the effect of drying macauba fruit on the quality of the pulp oil. Husked and dehusked fruits were dried at 60°C and then stored. At 0, 15, 45, 100, and 180 days after storage, fruit samples were retrieved, and the oil from the pulp was evaluated for physicochemical parameters. The removal of the husk from the fruits considerably reduced the drying time compared to that of the husked fruits. Drying prevented deterioration of the fruit even after 180 days of storage, regardless of the presence of the husk. The drying process allowed for efficient storage of the macauba fruit while maintaining low levels of oil acidity. Furthermore, the oxidative stability of the pulp oil from the dehusked dried fruits lasted longer than that from the husked dried fruits. Therefore, drying is a viable alternative for the postharvest of macauba fruits to maintain the quality of the oil for biodiesel production.