We demonstrate infrared femtosecond laser-induced inversion of ferroelectric domains. This process can be realised solely by using tightly focused laser pulses without application of any electric field prior to, in conjunction with, or subsequent to the laser irradiation. As most ferroelectric crystals like LiNbO₃, LiTaO₃, and KTiOPO₄ are transparent in the infrared, this optical poling method allows one to form ferroelectric domain patterns much deeper inside a ferroelectric crystal than by using ultraviolet light and hence can be used to fabricate practical devices. We also propose in situ diagnostics of the ferroelectric domain inversion process by monitoring the Čerenkov second harmonic signal, which is sensitive to the appearance of ferroelectric domain walls.

Tightly focused femtosecond infrared optical pulses are employed to invert spontaneous polarization in the bulk of single–domain ferroelectric calcium barium niobate crystal. Such created localized ferroelectric domains could be arranged in 1D, 2D, and 3D patterns. The fabricated domain structures are subsequently used to demonstrate nonlinear diffraction via transverse second harmonic generation. This work constitutes the first realization of optically induced spatially localized ferroelectric domains in the bulk of a single domain ferroelectric medium and has a potential for applications in nonlinear light processing, frequency conversion, and others.

We used an all-optical poling method to fabricate quadratic nonlinearity gratings in a tetragonal 0.62Pb(Mg_1/3Nb_2/3)O₃-0.38PbTiO₃ (PMN-38PT) crystal. We then employed these gratings in quasi-phase matched collinear second harmonic generation processes. By measuring the second harmonic output, we provided, for the first time, to the best of our knowledge, quantitative estimates of all three non-zero quadratic nonlinearity coefficients of the PMN-38PT crystal.

Ferroelectric domain engineering has wide applications in optical and electronic industries. Compared with traditional electric field poling, femtosecond laser poling has many advantages, such as higher fabrication resolution, 3D engineering applicability, and lower costs of production. In this review, the recent research progress on ferroelectric domain engineering with femtosecond laser pulses is presented. We show the latest results, including complex domain structures fabricated in various kinds of ferroelectric crystals, and discuss the influence of laser poling parameters and conditions on the morphologies of inverted domains and their physical mechanisms. The technical challenges to overcome in future are also briefly discussed.

Existing tunable optical metasurfaces based on the electro-optic effect are either complex in structure or have a limited phase modulation range. In this paper, a simple rectangular metasurface structure based on a Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ (PMN-PT) crystal with high electro-optic coefficient of 120 pm/V was designed to demonstrate its electrically tunable performance in the optical communication band through simulations. By optimizing the structure parameters, a tunable metasurface was generated that can induce a complete 2π phase shift for beam deflection while maintaining relatively uniform transmittance. Simulations further demonstrated the electrical tunability of the beam deflection direction and operating wavelength of the metasurface. This tunable optical metasurface, with its simple and easily fabricated structure, can promote the development and application of multifunctional and controllable metasurfaces. Its adjustable beam deflection direction and operating wavelength may find applications in fields such as optical communication systems and imaging.