Interior permanent magnet synchronous motors (IPMSMs) are widely applied as drive motors in electric vehicles because they have the advantages of high power density, high efficiency, and excellent dynamic performance. This paper introduces a framework for multi-objective optimization, tailored for the demands of V-Shaped IPMSMs, which involves high-dimensional variables. The framework is divided into three parts. Firstly, a proportional parametric finite element analysis (FEA) model for V-Shaped IPMSMs was established to reduce the probability of size interference among motor design parameters. Secondly, a surrogate model was trained using the design of experiments (DOE) approach and was utilized to substitute the FEA model. The accuracy of the surrogate model was then verified. Thirdly, the surrogate model was used as a fitness function, and a non-dominated sorting genetic algorithm II (NSGA-II) was employed as the optimization method to acquire the optimal goals rapidly. Based on the optimal design parameters, a prototype of the electrical motor was fabricated. Finally, the effectiveness of optimization was proven by experimental testing.
An asymmetric, cross-coupling effect, as well as digital control delays, in a permanent-magnet synchronous motor (PMSM) will deteriorate its current-control performance in the high-speed range, especially for electric motors used in electric vehicles (EVs) with features such as high-power density and a low carrier/modulation frequency ratio. In this paper, an angle-compensating, complex-coefficient, proportional-integrator (ACCC-PI) controller is proposed, which aims to provide an excellent decoupling performance even with considerable digital control delay. Firstly, the current open and closed loop complex-coefficient transfer functions were established in the synchronous rotation coordinate system. The proposed method, along with existing ones, were then evaluated and theoretically compared. On this basis, the parameter-tuning method of the ACCC-PI controller was presented. Finally, simulation and experimental results proved the correctness of the theoretical analysis and the proposed method.
25 May 2023 in IEEE Transactions on Plasma Science
This article proposes a modified adaptive genetic algorithm (GA) to realize the current waveform optimization for multi-phase air-core pulsed alternators (ACPA). ACPA plays an important role in the field of pulsed power supply. Driving the electromagnetic launch needs a rectangular current pulse. By controlling the trigger angles of each phase, the multi-phase ACPA pulse driving system provides more flexibility to obtain desired current waveform. However, the multi-phase ACPA system is complex and the number of optimization variables is large. This article has investigated the modeling and pulse shaping for an eight-phase ACPA. First, the generalized direct and quadrature (DQ) model of the $n$ -phase ACPA system was formulated based on the generalized Parker’s transform matrix. The simulation results indicated that the new model has acceptable accuracy. Then, a modified adaptive GA has been proposed with a new mutation operator and crossover operator for current waveform optimization. The simulation experiments were performed using MATLAB. The simulation results showed that the proposed algorithm was effective, with an 8.79% improvement over the traditional GA. Finally, a discharge experiment for the ACPA prototype has been conducted. Experiment results indicated the prototype could release a high-current pulsed discharge current and verified the effectiveness of the proposed DQ model.