The human–machine interface with head control can be applied in many domains. This technology has the valuable application of helping people who cannot use their hands, enabling them to use a computer or speak. This study combines several image processing and computer vision technologies, a digital camera, and software to develop the following system: image processing technologies are adopted to capture the features of head motion; the recognized head gestures include forward, upward, downward, leftward, rightward, right-upper, right-lower, left-upper, and left-lower; corresponding sound modules are used so that patients can communicate with others through a phonetic system and numeric tables. Innovative skin color recognition technology can obtain head features in images. The barycenter of pixels in the feature area is then quickly calculated, and the offset of the barycenter is observed to judge the direction of head motion. This architecture can substantially reduce the distraction of non-targeted objects and enhance the accuracy of systematic judgment.
Many applications, such as photovoltaic systems, uninterruptible power supplies, and automobile headlamps, need a high step-up DC–DC converter without isolation. The conventional boost converter has the advantages of simple topology and easy control. However, it has some shortcomings, such as insufficient step-up voltage ratio and poor efficiency when operating at large duty-cycle conditions. One of the popular topologies used to overcome these problems is the coupled-inductor boost converter. It utilizes the turn ratio of the coupled inductor to realize a higher step-up voltage ratio. The drawback is that the leakage inductance of the coupled inductor causes a huge voltage spike when the power switches are turned off. Moreover, because coupled inductors are characterized by their large volume and high profile, a conventional coupled-inductor boost converter is unsuited for photovoltaic systems, such as the solar microinverter. This study proposes a novel high-step-up boost converter to solve these problems. This proposed converter uses dual coupled inductors instead of the conventional coupled-inductor boost converter. The secondary side of the coupled inductor is connected in series to increase the step-up voltage ratio. The proposed converter utilizes active clamping to achieve zero-voltage switching (ZVS) for suppressing voltage spike and improving conversion efficiency. In addition, low-profile designs can be fulfilled easily for solar microinverters. The proposed converter and its control method are introduced. The operation principle, circuit characteristics, and circuit analysis are presented. A prototype converter with 300 W output power 25–40 VDC input voltage and 200 VDC output voltage was tested. All functions, including high step-up voltage ratio, ZVS, and active clamping, were achieved, and the highest efficiency was around at 94.7%.