Andreea Nistorac

Ms. Andreea Nistorac


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 July 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
ABAlexandra Bodoga
Alexandra Bodoga
ANAndreea Nistorac
Andreea Nistorac
MLMaria Carmen Loghin
Maria Carmen Loghin
Dorina Nicolina IsopescuDorina Nicolina Isopescu
Dorina Nicolina Isopescu
Life cycle assessment (LCA) is a method for assessing the environmental impact of a product, activity, or system across all the stages of its life cycle. LCA can identify the activities with a major impact on the environment throughout the life cycle of a product. To analyze the environmental implications of footwear, the LCA was applied to a pair of shoes designed for professional use. In this paper, the impact of a single pair of shoes was studied. Every year, footwear production worldwide is over 22 billion pairs, which has a significant impact on the environment. In this case study, the “cradle-to-grave” approach was used, which refers to all the activities involved in the life cycle of a footwear product, starting from raw material extraction, manufacturing, use, maintenance, and, in the end, disposal. The LCA was conducted using the SimaPro software. The environmental impact assessment of the analyzed shoe needed the acquisition of two crucial datasets. Background inventory data were sourced from the Ecoinvent database (version 3.3). The impact was quantified using the Global Warming Potential (GWP) metric, which calculates the contribution of emissions to global warming over a 100-year time limit according to the established values provided by the Intergovernmental Panel on Climate Change (IPCC). The impact of greenhouse gas (GHG) emissions was measured in relative carbon dioxide equivalents (kg CO2eq) to facilitate a standardized comparison. The results show that the total carbon footprint for a pair of safety boots is 18.65 kg of CO2eq with the “component manufacture” stage as a major contributor accumulating almost 80%.

2 October 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Dorina Nicolina IsopescuDorina Nicolina Isopescu
Dorina Nicolina Isopescu
LALaurentiu Adam
Laurentiu Adam
ANAndreea Nistorac
Andreea Nistorac
ABAlexandra Bodoga
Alexandra Bodoga
In recent times, climate change has become more evident than ever, and measures to slow down its negative effects are imperative for the future of the world. The scientific and economic communities of countries around the world, under the force of international climate agreements, are identifying solutions to reduce greenhouse gas (GHG) emissions by establishing appropriate measures and developing new strategies. In the context of these objectives, the effort to identify eco-sustainable practices for the construction industry is growing significantly. Recently, much research has focused on solutions for producing green building materials, as well as applying circular economy principles to achieve a balance between anthropogenic emissions and absorptions by greenhouse gas absorbers. The relevant indicators of the level of achievement of these major objectives can be identified, already from the construction design phase, with the help of Life Cycle Assessment (LCA) analysis. This paper presents a series of environmental impact analyses for an eco-friendly solution of precast concrete masonry blocks. Ecological concrete is manufactured with aggregates from biological waste resulting from hemp crops. Impact assessments were performed with the SimaPro 9.5 software application. Research has shown that in the production chain, which includes the materials resulting from the recycling and reuse of hemp concrete blocks, the contribution to the effort to achieve neutrality in terms of global warming is significant. The Cradle-to-Cradle scenario revealed that the recycling of hemp concrete masonry blocks at the end of their use, for a functional unit of 0.5 m3, has a GHG emission of 33.5228 [kg CO2-eq] and CO2 uptakes can reach the negative value of −53.8397 [kg CO2-eq]. Thus, the balance of GHG emissions is negative, with values of approximately −20.3169 [kg CO2-eq]. The LCA analyses also reflect a decreased damage to human health, natural resources, and biodiversity when hemp concrete is used for masonry blocks.

13 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Dorina Nicolina IsopescuDorina Nicolina Isopescu
Dorina Nicolina Isopescu
CGCatalin Daniel GALATANU
Catalin Daniel GALATANU
ACAlexandra Cojocaru
Alexandra Cojocaru
Sebastian George MaxineasaSebastian George Maxineasa
Sebastian George Maxineasa
Ioana-Roxana Vizitiu-BaciuIoana-Roxana Vizitiu-Baciu
Ioana-Roxana Vizitiu-Baciu
Ligia MogaLigia Moga
Ligia Moga
Daylighting design is not only dimensioning glazed surfaces to provide sufficient natural light to an occupied space but also a method of analyzing how this can be achieved without unwanted effects, such as gains and losses of heat, glare, and variations in daylighting intensity at various indoor distances and levels. The case study presented in this paper highlights the energy consumed due to a group of windows with a large glazed area in an existing building located in a temperate continental climate area. The energy consumption results from supplementary artificial lighting required to maintain adequate illumination for indoor activities and to counterbalance heat loss during colder periods are evaluated. The analysis performed by modifying the glazed surface led to the identification of an optimum value of window dimensions for minimum energy consumption. The results of the case study highlight the fact that the evolution of the total energy consumption, evaluated as the sum of the energy consumption due to additional heating/cooling and the artificial lighting required to compensate for the reduction in natural light, is strongly influenced by the dimensions of the glazed surfaces, as well as the minimum level of lighting imposed by the regime of activities carried out in the building. Thus, the outcomes obtained in the research show that at lighting values below 500 lx, the total energy consumption is directly proportional to the glazed surface. From values of 500 lx for the illuminance level, the total energy consumption drops from 2730 kWh/year for a window height of 230 cm to 2399 kWh/year for a height of 110 cm, after which it starts to rise again, reaching a value of 2786 kWh/year for a height of 30 cm. This phenomenon is also found at values higher than 500 lx; accordingly, for an imposed lighting of 1000 lx, the minimum total consumption is identified at a window height of 150 cm. The case study presented in this paper clearly highlights a complex relationship between the height of the glazed surface and the energy consumption required to compensate for heating or cooling and the reduction in natural lighting. Lower window heights reduce heat loss or gain but also correspondingly increase the energy consumption of artificial lighting.

26 June 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
Dorina Nicolina IsopescuDorina Nicolina Isopescu
Dorina Nicolina Isopescu
CGCatalin Daniel GALATANU
Catalin Daniel GALATANU
AUAlexandra Ungureanu
Alexandra Ungureanu
Sebastian George MaxineasaSebastian George Maxineasa
Sebastian George Maxineasa
Ioana-Roxana Vizitiu-BaciuIoana-Roxana Vizitiu-Baciu
Ioana-Roxana Vizitiu-Baciu
Ligia MogaLigia Moga
Ligia Moga
Daylighting design is not only a stage of dimensioning glazed surfaces to provide sufficient natural light to an occupied space, but also a method of analysing how this matter can be achieved without unwanted effects, such as: gains and losses of heat, glare, and variations of the daylighting intensity, at various indoor distances and levels. According to the international regulations in force, glazed surfaces must be designed with a careful balance between the admission of natural light and thermal performance, such as heat loss in winter and heat gain in summer. In a novel project, it is essential to determine the optimal ratio of window-to-wall surface area. This necessity arises because the materials constituting the glazed surfaces of windows typically exhibit lower insulation properties compared to those of the building's walls. This methodology could be applied to building renovations when envelope modifications are possible and suitable. The case study presented in the paper highlights the energy consumed due to a group of windows with a large glazed area in an existing building, located in a temperate continental climate area. The energy consumption results from supplementary artificial lighting required to maintain adequate illumination for indoor activities and that to counterbalance heat loss during colder periods are evaluated. The analysis performed by modifying the glazed surface led to the identification of an optimum value of windows dimensions for an energy consumed minimum.

17 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
ABAlexandra Bodoga
Alexandra Bodoga
ANAndreea Nistorac
Andreea Nistorac
Alin DragomirAlin Dragomir
Alin Dragomir
EAEugen Constantin Ailenei
Eugen Constantin Ailenei
Arina SeulArina Seul
Arina Seul
MLMaria Carmen Loghin
Maria Carmen Loghin
This study explores the use of ozone decontamination as a sustainable approach for eradicating pathogens from various environments. Ozone, a highly reactive gas, demonstrates remarkable efficacy in eliminating bacteria, viruses, and fungi. Decontamination of textile materials using an innovative ozone treatment method conducted under vacuum conditions has been investigated. A hybrid apparatus comprising a vacuum and an ozone generator was employed for the decontamination process. Ozone decontamination offers environmental benefits by avoiding harmful by-products and minimising long-term environmental exposure. However, challenges include the need for proper equipment and training to ensure safety and effectiveness. This research underscores the promise of ozone decontamination as a powerful and eco-friendly method for pathogen eradication in textile materials with future developments in diverse settings.