The rising volume of sewage sludge from urbanization poses substantial environmental and public health concerns, underscoring the urgency for the implementation of effective waste management strategies. The objective of this study was to evaluate the influence of pyrolysis temperature on the chemical composition and agronomic potential of biochar derived from sewage sludge. The pyrolysis process was conducted at temperatures ranging from 400 °C to 800 °C, and the resulting biochar was analyzed for pH, electrical conductivity, metal content, and carbon fractions. Additionally, phytotoxicity tests were conducted to assess the impact of the biochar on plant germination. The findings indicated that elevated pyrolysis temperatures resulted in an elevated alkalinity, electrical conductivity, and concentration of alkali metals in the biochar. Conversely, these processes resulted in a reduction in total organic carbon content and an increase in heavy metal content, which may limit the potential for biochar to be used in agricultural applications. The phytotoxicity tests indicated that the biochar produced at lower temperatures (400 °C) exhibited positive effects on plant growth when administered at doses of 5 and 10 t·ha⁻¹. Conversely, the biochar produced at higher temperatures (800 °C) demonstrated significant toxicity. The findings indicate that the pyrolysis temperature is a critical factor in determining the suitability of biochar for agricultural applications. The production of biochar at lower temperatures may offer agronomic benefits, whereas the use of higher temperatures increases stability but is associated with the risk of higher heavy metal concentrations.

Introduction and objective: Snow cover serves as a unique indicator of environmental pollution in both urban and rural areas. As a seasonal cover, it accumulates various pollutants emitted into the atmosphere, thus providing insight into air pollution types and the relative contributions of...

This study aimed to determine the quantity and quality of dissolved organic carbon (DOC) released from sewage sludge-derived biochar and digestion-derived biochar under different extraction conditions (deionised water, hot water, 0.1 mol/L NaOH) using TOC analyser, UV-vis spectroscopy. Biochars...

Monitoring the quality of tap water in the distribution system and the ability to estimate the risk of losing its sanitary safety is an important aspect of managing the collective water supply system. During monitoring, the physical, chemical, and biological stability of water was assessed, which is the main determinant ensuring the appropriate quality of water for consumers. The physicochemical and microbiological quality of water was analyzed for two distribution systems (DSs), including the analysis of heavy metals (Zn, Fe, Mn, Cr, Ni, Cu, Cd, Pb). The tests carried out showed that in both distribution systems, the water supplied to consumers met the guidelines for water intended for human consumption. It can be considered that the risk of uncontrolled changes in water quality in DSs with an average water production of <10,000 m³/d and the length of water pipelines < 150 km is very low. The water introduced into the system differed in the place of water intake and water purification technology, which influenced the final water quality. In DS(II), higher values were recorded for hardness, conductivity, calcium, alkalinity, nitrates, and DOC. It was found that the content of heavy metals during water transport to the consumer increased in the case of DS(I) for Zn, Ni, Cu, Cd, and Pb, and in the case of DS(II) for Fe, Mn, Ni, Cu, Cd, and Pb. The observed differences resulted from the different quality of the intake water as well as from different materials used to build internal installations and their age and technical condition. The analyzed tap water was characterized by physical and chemical stability. However, the water did not meet the guidelines for water biostability due to the increased content of biogenic substances.

Introduction and objective: The identification and understanding of interactions between contaminants present in sediments from stormwater and combined sewer systems is a prerequisite for their proper management, and provides a basis for developing effective strategies to minimize their...

Despite the growing awareness of the impact of storm runoff on the environment, the data concerning the composition of storm sewer sediments in seasonal and spatial terms remains limited. The objective of the present study was to assess the seasonal variability of selected physicochemical...