Emad K. Njim

Prof. Emad K. Njim

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Ahmed OgailiAhmed Ogaili
Ahmed Ogaili
ABAli Basem
Ali Basem
MKMohammed Salman Kadhim
Mohammed Salman Kadhim
ZAZainab talib Al-sharify
Zainab talib Al-sharify
Alaa Abdulhady JaberAlaa Abdulhady Jaber
Alaa Abdulhady Jaber
EAEhsan S. Al-Ameen
Ehsan S. Al-Ameen
The incorporation of fiber reinforcements into polymer matrices has emerged as an effective strategy to enhance the mechanical properties of composites. This study investigated the tensile and fracture behavior of 3D-printed polylactic acid (PLA) composites reinforced with chopped carbon fibers (CCFs) through experimental characterization and finite element analysis (FEA). Composite samples with varying CCF orientations (0°, 0°/90°, +45°/−45°, and 0°/+45°/−45°/90°) were fabricated via fused filament fabrication (FFF) and subjected to tensile and single-edge notched bend (SENB) tests. The experimental results revealed a significant improvement in tensile strength, elastic modulus, and fracture toughness compared to unreinforced PLA. The 0°/+45°/90° orientation exhibited a 3.6% increase in tensile strength, while the +45°/−45° orientation displayed a 29.9% enhancement in elastic modulus and a 29.9% improvement in fracture toughness (259.12 MPa) relative to neat PLA (199.34 MPa√m). An inverse correlation between tensile strength and fracture toughness was observed, attributed to mechanisms such as crack deflection, fiber bridging, and fiber pull-out facilitated by multi-directional fiber orientations. FEA simulations incorporating a transversely isotropic material model and the J-integral approach were conducted using Abaqus, accurately predicting fracture toughness trends with a maximum discrepancy of 8% compared to experimental data. Fractographic analysis elucidated the strengthening mechanisms, highlighting the potential of tailoring CCF orientation to optimize mechanical performance for structural applications.

19 January 2024 in Advances in Polymer Technology
Verified
Journal Article
Open access
PDF file
ENEmad K. Njim
Emad K. Njim
HHHussam Raad Hasan
Hussam Raad Hasan
MJMuhsin J. Jaber Jweeg
Muhsin J. Jaber Jweeg
MAMuhannad Al-Waily
Muhannad Al-Waily
AHAlaa Ali Hameed
Alaa Ali Hameed
FEFahmi Elsayed
Fahmi Elsayed
In the field of lighter substitute materials, sandwich plate models of composite and hybrid foam cores are used in this study. Three core structures: composite core structure and then the core is replaced by a structure of a closed and open repeating cellular pattern manufactured with 3D printing technology. It finally integrated both into one hybrid open-cell core filled with foam and employed the same device (WBW-100E) to conduct the three-point bending experiment. The test was conducted based on the international standard (ASTM-C 393-00) to perform the three-point bending investigation on the sandwich structure. Flexural test finding, with the hybrid polyurethane/polytropic acid (PUR/PLA) core, the ultimate bending load is increased by 127.7% compared to the open-cell structure core. In addition, the maximum deflection increased by 163.3%. The simulation results of three-point bending indicate that employing a hybrid combination of PUR-PLA led to an increase of 382.3%, and for PUR–TPU by 111.8%; however, the highest value recorded with PUR/PLA, which has the slightest stress error among the tests. Also, it is reported that when the volume fraction of reinforced aluminum particles is increased, the overall deformation becomes more sufficient, and the test accuracy improves; for example, rising from 0.5% to 3%, the midspan deflection of composite (foam-Al) is increased by 40.34%. There were noticeable improvements in mechanical properties in the 2.5% composite foam-Al.

25 January 2022 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
ENEmad K. Njim
Emad K. Njim
SBSadeq H. Bakhi
Sadeq H. Bakhi
MAMuhannad Al-Waily
Muhannad Al-Waily
Functionally graded porous materials (FGPMs) are porous structures with a porosity gradient distributed over the entire volume. They have many applications in the aerospace, marine, biomedical, automotive, and shipbuilding industries. High strength to weight and excellent energy absorption is the most important features that make these structures unique. In this paper, the flexural properties of simply-supported sandwich beams with functionally graded porous core under flexural load were evaluated experimentally and numerically based on various parameters. A three-point bending test for 3D printed sandwich specimens with porous metal core bonded with aluminum face sheets using various porosity parameters and core heights has been performed to measure the peak load and maximum deflection and explore the sandwich structure's strength. To validate the accuracy of the experimental solution, a finite element analysis (FEA) is carried out using ANSYS 2021 R1 software. Tests and FEM show that the sandwich beam behavior is closely related to porosity, power-law index, and FG porous metal core thicknesses. Experimental results indicated that at a porosity ratio of 10 %, FG core height 10 mm the maximum bending load was 573 N and maximum deflection 13.8 mm respectively. By increasing porosity to become 30% using the same geometrical parameters, the bending load was reduced by 15.4 % while the deflection exhibited a 1.4 % increase. The Numerical results for the three-point bending are compared with experimental measurements, showing a fair agreement with a maximum discrepancy of 15%.

19 June 2023 in Physics and Chemistry of Solid State
Verified
Journal Article
Open access
PDF file
HRHussam Raad
Hussam Raad
ENEmad K. Njim
Emad K. Njim
MJMuhsin J. Jweeg
Muhsin J. Jweeg
MAMuhannad Al-Waily
Muhannad Al-Waily
This work attempts to replace the sandwich core's traditional shape and material with a cellular pattern, where the cells have a regular shape, distribution, and size. The contribution of this paper is to design two structures, one open-celled and the other closed, and to evaluate the performance of sandwich plates with lattice cell core as it is used for many industrial applications, particularly in automobile engineering. The new theoretical formulations are constructed for two structures to find the free vibration characteristics. The results of the new design are compared with the traditional shape. Derivation of equations to predict mechanical properties based on relative density with the chosen shapes, specific vibration equation of three-layer sandwich plate, and substitution by equation using excel sheet. Results are promising, and the effectiveness of cellular pattern theoretical analysis estimation. Limitations and error rates for the mechanical properties come through the empirical equations, and their ratio to the relative density values are higher depending on the behavior of the core material. Findings reveal, with open cell decrease in modulus of elasticity by (PLA: -90.4%) and (TPU: -90.4%), increases natural frequency by (PLA: 44.5%) and (TPU: 46.4%), as for closed-cell decreases in the modulus of elasticity by (PLA: -66.9%) and (TPU: -64.4%), increases natural frequency by (PLA: 36%) and (TPU: 37.7%). Converting a solid substance or replacing a foam form with a cellular pattern is one way to better performance and save weight through the selected cell pattern in absorbing the energy of the vibration wave.

21 August 2023 in Jurnal Teknologi (Sciences & Engineering)
Verified
Journal Article
Closed access
PDF file
ENEmad K. Njim
Emad K. Njim
SESadiq Emad
Sadiq Emad
MHMohsin Noori Hamzah
Mohsin Noori Hamzah
Metamaterials, commonly known as synthetic composites with exotic dynamic characteristics, have recently generated increasing interest. A short description of composite metamaterial and their types, applications, and manufacturing techniques was reported. Contrary to all previous research, this investigation focuses on the recent studies of static and dynamic analysis of composite metamaterial structure and mechanical performance using experimental and finite element method analyses. Furthermore, the literature has described several methods for constructing composite sandwiches, properties, and advantages over conventional materials. Due to the wide variety of materials and configurations used in the final product, there is a corresponding diversity in manufacturing techniques. Therefore, the current research has mainly concentrated on a wealth of information that should be important to all researchers interested in keeping up with the most recent developments in composite metamaterial sandwich structures. Consequently, this study can be considered a guideline for researchers who intend further research on the mechanical behavior analysis and technology of designed composite metamaterial structures.

20 November 2023 in Physics and Chemistry of Solid State
Verified
Journal Article
Closed access
ENEmad K. Njim
Emad K. Njim
SSS.E. Sadiq
S.E. Sadiq
MTM.S. Al-Din Tahir
M.S. Al-Din Tahir
MFM.A. Flayyih
M.A. Flayyih
LHL. Hadji
L. Hadji
This work synthesized a thermoplastic polymer with varying densities along one direction using additive manufacturing technology to study the dynamic and static characteristics of functionally graded viscoelastic materials (FGVMs). To describe the mechanical properties of FGVMs, an analytical formulation based on the sigmoid-law formulation was proposed. The experimental program is conducted on 3D-printed samples, and various tests are conducted to examine the performance of such materials. Furthermore, the finite element method was used to evaluate the structural system's flexural properties. The influences of FG parameters and geometrical properties on flexural and reverse bending fatigue life are analyzed. The results show that increasing porosity from 10% to 30% at a power-law index (k = 2) reduces bending strength by 31.25 percent and deflection by around 11.2 percent for VE samples. Changing the power-law exponent from 0.5 to 10 increases fatigue strength by 35 %.