A practical study was conducted to improve the performance of conventional pyramidal solar stills (CPSS) using two types of fins with differing geometries, as well as nanocomposites of TiO₂ and graphene. The first fin was hollow, cylindrical, and perforated (HCPF), whereas the second fin was an inclined perforated rectangular fin (IPRF). The fins were integrated with the base of a solar still to evaluate their performance in comparison with a CPSS. The obtained experimental results demonstrated that the pyramidal solar still with hollow perforated cylindrical fins (PSS-HCPF) and the pyramidal solar still with inclined perforated rectangular fins (PSS-IPRF) produced more distillate than the PSS-HCPF and CPSS under all examined conditions. The daily productivities of the CPSS, PSS-HCPF, and PSS-IPRF were 3718, 4840, and 5750 mL/m², respectively, with the PSS-HCPF and PSS-IPRF improving the productivity by 31.3% and 55.9%, respectively, compared to that of the CPSS. In addition, using nanocomposites with PSS-IPRF improved the daily distillate production by 82.1%.

The incorporation of fiber reinforcements into polymer matrices has emerged as an effective strategy to enhance the mechanical properties of composites. This study investigated the tensile and fracture behavior of 3D-printed polylactic acid (PLA) composites reinforced with chopped carbon fibers (CCFs) through experimental characterization and finite element analysis (FEA). Composite samples with varying CCF orientations (0°, 0°/90°, +45°/−45°, and 0°/+45°/−45°/90°) were fabricated via fused filament fabrication (FFF) and subjected to tensile and single-edge notched bend (SENB) tests. The experimental results revealed a significant improvement in tensile strength, elastic modulus, and fracture toughness compared to unreinforced PLA. The 0°/+45°/90° orientation exhibited a 3.6% increase in tensile strength, while the +45°/−45° orientation displayed a 29.9% enhancement in elastic modulus and a 29.9% improvement in fracture toughness (259.12 MPa) relative to neat PLA (199.34 MPa√m). An inverse correlation between tensile strength and fracture toughness was observed, attributed to mechanisms such as crack deflection, fiber bridging, and fiber pull-out facilitated by multi-directional fiber orientations. FEA simulations incorporating a transversely isotropic material model and the J-integral approach were conducted using Abaqus, accurately predicting fracture toughness trends with a maximum discrepancy of 8% compared to experimental data. Fractographic analysis elucidated the strengthening mechanisms, highlighting the potential of tailoring CCF orientation to optimize mechanical performance for structural applications.

Although water is the second most important fluid, after air, found on the Earth, there is a vital problem in the availability of water for many organisms, and this problem faces the whole world. As a result, scientists have developed many methods of purifying the saline/brackish water to be suitable for different uses in addition to the purpose of drinking. Fortunately, solar distillation is very rewarding in terms of operating costs and costs for a liter of freshwater distillated with using clean and environmentally friendly energy. Solar distiller is one of the solar distillation systems devices, which is simple in construction, cheap, and easy to use but it has the drawback of low productivity. This article aims to provide a summary of the different ideas and works on solar stills through different variables that affect the performance of distillers. In contrast to the review papers dealing with this topic, this paper contains comprehensive and complete details and careful reviews of all the variables that affect the performance of distillers. Therefore, it is like a ladder in front of the authors until they reach the recent of what has been studied on the distillers in a simplified way to save time and effort, which will help them to come up with different ideas that were not easily studied. Thus, this paper introduces an overview on the detailed parameters affecting the performance of solar stills. These parameters are climatic, design, and operating factors. Climatic factors consist of solar radiation, ambient temperature, air speed, and dusty and cloudy weather. While the design factors include the evaporative and exposure surface areas, glazing cover material, inclination, and thickness, distiller material, and of insulating material and thickness. Whist, the operating parameters consist of the water temperature, feed water temperature, applying vacuum, temperature difference between water and glass cover, and hybrid systems. From the extensive literature, it is concluded that the climatic, design, and operating factors significantly affect the performance of the solar still. Finally, some points are proposed for further investigation.