Nanocrystalline copper (Cu) is considered to be one of the best interconnected material in integration circuit (IC) industry, because of its ultra-low resistivity and high mechanical stability. Mechanical properties of nanocrystalline Cu are completely different from those of bulk monocrystalline Cu. These properties are of high importance in the assessment of the thermo-mechanical reliability of the interconnected IC structure. To investigate the effects of the grain sizes and temperature on the mechanical properties of nanocrystalline Cu, molecular dynamics simulations of uniaxial tensile test are performed in this study. The results show that the elastic modulus of nanocrystalline Cu with grain sizes of 4.65–12.41 nm gradually increases with the increase of the mean grain sizes, the corresponding flow stress concurrently increases, and the flow stress is proportional to the square-root of the grain size, which satisfies the inverse-Hall–Petch relation. Furthermore, the elastic modulus linearly decreases with the increase of temperature. The coupled effect of the flow stress, strain rate and temperature were elaborated by the Arrhenius hyperbolic sinusoidal model. Meanwhile, the deformation activation energy of nanocrystalline Cu for various grain sizes were obtained. All of the tensile simulation tests confirmed that the mechanism of plastic deformation for nanocrystalline Cu with 4.65–12.41 nm grain sizes is mainly specific to the grain boundary sliding and grain rotation. The dislocation nucleation and migration, which is usually the deformation mechanism of plasticity for macroscopic materials, is no longer the dominant factor for nanocrystalline Cu.
The two-step growth technique was introduced to solve the high lattice mismatch (5.6%) between In0.78Ga0.22As and GaAs substrate, and the mechanism of dislocation density reduction by a low-temperature buffer (LT-buffer) was investigated experimentally. For different thicknesses of LT-buffer layers, the surface morphology and microstructure were investigated, and the residual strain and dislocation density of the In0.78Ga0.22As epitaxial layer were studied by XRD, Raman spectroscopy and TEM. We proposed a mechanism explaining the dislocation density reduction during the two-step growth process by the LT-buffer. Also, the experimental results support our conclusion and verify the mechanism we presented.
Understanding the interactions between planar defects and complex dislocation structures in a material is of great significance to simplify its design. In this paper, we show that, from an atomistic perspective, by using molecular dynamics simulations on nanoindentations, a prismatic dislocation loop in Ni3Al appears in pairs with a butterfly-like shape. The planar defects in Ni3Al can effectively block the movement of the prismatic dislocation loop pairs and play a hardening role. Among the impediment factors, twinning boundaries are the strongest and antiphase boundaries are the weakest. Superlattice intrinsic and complex stacking faults have basically the same blocking effect. Furthermore, we systematically elucidate the hardening effects and interaction mechanisms between the prismatic dislocation loop pairs and planar defects. These findings provide novel insights into the nanostructured design of materials with excellent mechanical properties.
11 September 2023 in Engineering Fracture Mechanics