Robotic manipulators are critical for industrial automation, boosting productivity, quality, and safety in various production applications. Key factors like the payload, speed, accuracy, and reach define robot performance. Optimizing these factors is crucial for future robot applications across diverse fields. While 6-Degrees-of-Freedom (DoF)-articulated robots are popular due to their diverse applications, this research proposes a novel 5-DoF robot design for industrial automation, featuring a combination of three prismatic and two revolute (2R) joints, and analyzes its workspace. The proposed techno-economically efficient design offers control over the robot manipulator to achieve any reachable position and orientation within its workspace, replacing traditional 6-DoF robots. The kinematic model integrates both parallel and serial manipulator principles, combining a Cartesian mechanism with rotational mechanisms. Simulations demonstrate the end effector’s flexibility for tasks like welding, additive manufacturing, and material inspections, achieving the desired position and orientation. The research encompasses the design of linear and rotational actuators, kinematic modeling, Human–Machine Interface (HMI) development, and welding application integration. The developed robot demonstrates a superior performance and user-friendliness in welding. The experimental work validates the design’s optimized joint trajectories, efficient power usage, singularity avoidance, easy access in application areas, and reduced costs due to fewer actuators.
9 May 2023 in Arabian Journal for Science and Engineering
In India, some states have the depth of ground water reaching beyond 300 - 450 meters from the ground level. Traditionally, Submersible Induction Motor (SIM) based pump-sets are considered for irrigations. However, SIMs are no longer a good choice for deep-bore wells, since there exists a reduction in its operating point, resulting in lower discharge. Based on these facts, Submersible Brushless Permanent Magnet Motor (SBLPMM) is considered. The proposed SBLPMM is designed for 15 kW with an objective of high torque and power density within the given volumetric and diametric constraints. The proposed SBLPMM will reduce the number of impeller stages when compared with SIMs and hence it will be a viable alternative to the SIMs and hence paying way for effective energy conservation.The study concentrates on the optimal selection of the geometrical poles and the FEM based results confirm that the operating efficiency is enhanced with the SBLPMM.
The aim of this research is to investigate and reduce the torque ripple in Switched Reluctance Motor (SRM) drives, which is one of the major barriers to their acceptance for electric vehicle propulsion applications despite the advantages of robustness, efficiency, and wide operating range. High torque ripple not only deteriorates drive smoothness but also contributes to noise and vibration, demanding an advanced control strategy beyond traditional current-shaping and switching-based approaches. In this context, this work proposes a DDPG (Deep Deterministic Policy Gradient) Actor–Critic Neural Network-based reinforcement learning control framework that learns the optimal firing angle offsets dynamically to ensure less ripple electromagnetic torque under varying speeds and load conditions. The developed strategy has been designed and trained in MATLAB Simulink R2024b and then deployed in real time using an FPGA-based digital controller for validation on hardware. Comparative analysis with TSF (Torque Sharing Function) and DITC (Direct Instantaneous Torque Control) demonstrates that the reinforcement learning approach gives a much smoother torque response with better dynamic behavior over the operating range analyzed.