Currently, two significant problems involve the government, population, and environment: the accelerated increase in organic waste and the need to replace conventional energy with environmentally sustainable energy. The sustainable use of organic waste is being intensely investigated to generate energy plants that produce alternative sustainable electrical energy beneficial to the population at a low cost. The novelty of this research is given by the use of pepper waste as fuel in the generation of bioelectricity, giving added value to these types of waste, benefiting farmers and companies dedicated to the export and import of these fruits, because they will be able to generate their own electrical energy using their own waste at a lower cost. For this reason, this research uses pepper waste as fuel in single-chamber microbial fuel cells manufactured at a low cost as its primary objective. The maximum values of the electric current (5.118 ± 0.065 mA) and electric potential (1.018 ± 0.101 V) were shown on the fourteenth day, with an optimal operating pH of 7.141 ± 0.134 and electrical conductivity of 112.846 ± 4.888 mS/cm. Likewise, a reduction in the COD was observed from 1210.15 ± 0.89 mg/L to 190.36 ± 16.58 mg/L in the 35 days of monitoring and with a maximum ORP of 426.995 ± 8.615 mV, whose internal resistance was 33.541 ± 2.471 Ω. The peak power density was 154.142 ± 8.151 mW/cm² at a current density of 4.834 A/cm², and the Rossellomorea marisflavi strain was identified with 99.57% identity.

The growing demand for agricultural products has increased exponentially, causing their waste to increase and become a problem for society. Searching for sustainable solutions for organic waste management is increasingly urgent. This research focuses on considering the waste of an Andean tuber, such as Olluco, as a fuel source for generating electricity and becoming a potential sustainable energy source for companies dedicated to this area. This research used Olluco waste as fuel in single-chamber microbial fuel cells using carbon and zinc electrodes. An electric current and electric potential of 6.4 ± 0.4 mA and 0.99 ± 0.09 V were generated, operating with an electrical conductivity of 142.3 ± 6.1 mS/cm and a pH of 7.1 ± 0.2. It was possible to obtain a 94% decrease in COD and an internal resistance of 24.9 ± 2.8 Ω. The power density found was 373.8 ± 28.8 mW/cm² and the current density was 4.96 A/cm². On day 14, the cells were connected in earnest, achieving a power of 2.92 V and generating enough current to light an LED light bulb, thus demonstrating the potential that Olluco waste has to be used as fuel in microbial fuel cells.

Scientific reports have diversified enormously in the various thematic areas of the scientific world, generating errors and biases in the searches and directing the various investigations. For this reason, this article provides an approach, from the point of view of bibliometric analysis, to reveal the trends of agricultural waste for its potential use as fuel in generating electrical energy. This research has used the programs RStudio, VosViewer, and Excel for the compilation and analysis of data, whose data were extracted from Scopus during the period from 2013 to 15 March 2024, filtering all types of publications that were not original articles and English language. Scientific reports have found that biodigesters are constantly evolving, improving valves, studying and analyzing different types of agricultural waste, and using microorganisms to accelerate the fermentation process of agricultural waste. The terms biogas (330 occurrences), anaerobic digestion (214 occurrences), and agriculture (212 occurrences) were the words with the highest occurrences. At the same time, the author that stood out was Liu Y., who had an H index of 6 and 117 citations in his six articles published in the Scopus database. Moreover, China (1900 citations) was the country with the highest citation numbers, followed by the United States (1060 citations) and India (967 citations). The designs of biogas production increase efficiency and can increase biodigesters’ performance. The research also reveals the different types of development and trends that stood out and emerged in the last decade, such as the authors who have had the most impact on this topic that has recently emerged and the countries that have obtained the most significant number of publications on the topic.

Plastic waste, a persistent and escalating issue, and the high costs of installing electric power, particularly in remote areas, have become pressing concerns for governments. This research proposes a novel method for generating electric power from sugarcane bagasse waste and reducing plastic waste. The key to this method is the use of the fungus Pleurotus ostreatus in microbial fuel cells. Microbial fuel cells (MFCs) demonstrated their effectiveness by generating peaks of electric current (4.325 ± 0.261 mA) and voltage (0.427 ± 0.031 V) on day twenty-six, with a pH of 5.539 ± 0.278. The peak electrical conductivity of the substrate was 130.574 ± 4.981 mS/cm. The MFCs were able to reduce the chemical oxygen demand by 83%, showing a maximum power density of 86.316 ± 4.724 mW/cm² and an internal resistance of 37.384 ± 62.522 Ω. The infrared spectra of the plastic samples showed a decrease in the peaks 2850–2920, 1470, and 720 cm⁻¹, which are more characteristic of plastic, demonstrating the action of the Pleurotus ostreatus fungus on the plastic samples. Also, the micrographs taken by SEM showed the reduction in the thickness of the plastic film by 54.06 µm and the formation of microstructures on the surface, such as pores and raised layers of the sample used.

The alga Chondracanthus chamissoi, commonly known as “yuyo” or “mococho” is found along the coasts of Peru and Chile. Due to its multiple applications in industrial, health, pharmaceutical, and productive sectors, its demand has increased, leading to the uncontrolled exploitation of natural banks and negatively impacting marine ecosystems. This experimental study evaluated the viability of propagating C. chamissoi propagules using the foliar fertilizer Bayfolan^® from Bayer, as well as its continuous, non-seasonal cultivation in La Ramada. This initiative aims to establish a productive area in La Libertad to meet the needs of national and international markets, reducing the indiscriminate exploitation of seaweed in natural banks. The results indicated that continuous cultivation is feasible, with growth rates of 0.0369 and 0.0388 g.day⁻¹ (0% Bayfolan) and 0.0397 and 0.0399 g.day⁻¹ (1% Bayfolan) during propagule propagation. Slight statistically significant differences were observed in final biomass between 0% and 1% Bayfolan treatments, and Bayfolan use reduced healing time by seven days. Nutritional and microbiological assays confirmed that fresh “yuyo” is suitable for human consumption; hence, La Ramada provides suitable physical–chemical and microbiological conditions for extracting and cultivating hydrobiological species, offering a viable alternative to the seasonal overexploitation of the algae and potential economic benefits for coastal families.

Plastic pollution is a pressing global environmental challenge, and low-density-polyethylene (LDPE) is among the most persistent synthetic polymers. This study investigates the in vitro biodegradation of LDPE by native Aspergillus strains isolated from plastic-contaminated soils in Trujillo, Peru. Molecular techniques were used to identify the Aspergillus species. The LDPE strips were incubated for 50 days, and biodegradation was evaluated by weight loss (%), pH variation, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Likewise, the reduction rate and half-life of the polymer (t_1/2) were calculated. Three strains of Aspergillus—A. niger H1C, A. ochraceopetaliformis H3C, and A. tamarii H6C—were isolated and evaluated for their ability to LDPE under in vitro conditions. A. niger H1C exhibited the most weight reduction (4.25 ± 1.67%) and a polymer half-life of 897.89 days, while A. tamarii H6C demonstrated a comparable loss (3.79 ± 1.52%) with a half-life of 901.6 days. A. ochraceopetaliformis H3C exhibited a moderate degradation (1.98 ± 0.37%), with the longest half-life recorded at 1757.33 days. The process was supported by pH variations. Furthermore, FTIR and SEM analyses revealed structural modifications in LDPE including formation of hydroxyl, carbonyl, and ether groups, suggesting oxidative and enzymatic activity-possibly mediated by lipases induced under lipid-rich conditions. This is the first report of A. ochraceopetaliformis and A. tamarii, highlighting their potential in sustainable plastic bioremediation strategies aligned with SDG 13 (Climate Action).