Satellite-based QKD is currently being developed to revolutionize global cryptographic key exchange by facilitating secure communication among remote parties at a global scale. By overcoming the exponential loss of fiber transmission, satellite-to-Earth communication can seamlessly interconnect vast distances as the link budget of such links is sufficient to support QKD links. In terms of this direction, DV-QKD implementations seems to be technologically ahead since key exchange has been experimentally demonstrated to perform much more efficiently by providing key rates that are orders of magnitude higher compared to entanglement-based key exchange. However, the specific requirements to support effectively functional DV-QKD satellite-to-ground links are yet to be defined. This work attempts to define the satellite and ground segment system requirements needed in order to achieve functional QKD service for various satellites orbits (LEO, MEO, and GEO). Finite key size effects are being considered to determine the minimum block sizes that are required for secure key generation between a satellite node and a ground terminal for a single satellite pass. The atmospheric link channel is modeled with consideration of the most important degradation effects such as turbulence and atmospheric and pointing loss. Critical Tx and Rx system parameters, such as the source’s intrinsic Quantum Bit Error Rate (iQBER), the Rx telescope aperture size, and detection efficiency, were investigated in order to define the minimum requirements to establish an operation satellite-to-ground QKD link under specific assumptions. The performance of each downlink scenario was evaluated for the wavelength of 1550 nm in terms of link availability, link budget, and in the distilling of secure key volumes over time. Finally, the feasibility and requirements for distributing the collected space photons via terrestrial telecom fibers was also studied and discussed, leading to the proposal of a more futuristic WDM-enabled satellite QKD architecture. This comprehensive analysis aims to contribute to the advancement and implementation of effective satellite-based QKD systems, which can further exploit the ground fiber segment to realize converged space/terrestrial QKD networks.

This paper presents an in-depth satellite-to-ground Quantum Key Distribution (QKD) feasibility analysis between a Low Earth Orbit (LEO) satellite and a 0.28 m small-sized Optical Ground Stations (OGSs) located in urban areas, over nighttime. Both Prepare & Measure (P&M) and Entanglement (ENT)- based QKD protocols are employed and compared in terms of distilled key bits. The performance of various detection setups and environmental conditions including different wavelengths (1550 nm and 810 nm) as well as different types of detectors (Avalanche and Superconducting Nanowires) is simulated. The results are compared to those obtained when OGSs with much larger receiver apertures are placed in rural environment. Our analysis delivers a framework examining the parameters affecting the QKD satellite downlink, and also provides a thorough theoretical framework for the employment of small-sized OGSs in urban environments.

We propose two configurations for the coexistence of sensing and communication signals, exploiting Free Space Optical (FSO) links to transmit commercial 6G traffic and remotely interrogate sensors distributed along distances of 100 m. The sensors are fabricated on a Silicon Photonics (SiPh) platform, to achieve miniaturization and highly compact form of the required features. The first scheme consists of couplers and circulators, while the second utilizes polarization handling elements to multiplex both signals, while a 100-m outdoor Free Space Optical link is utilized for both schemes. The configurations exhibit high stability, with uninterrupted transmission of traffic along the duration of the experiments, while the sensors’ performance is evaluated, with their discrepancies measured below 2%.

The authors present a novel approach to Quantum Key Distribution (QKD) research, emphasising cost‐effectiveness and practicality using a single photon polarisation‐encoded system employing mainly commercial off‐the‐shelf components. This study diverges from previous high‐cost, high‐end setups by exploring the viability of QKD in more accessible and realistic settings. Our approach focuses on practical measurements of the signal‐to‐noise ratio by analysing polarisation‐encoded photonic qubits over various transmission scenarios. The authors introduce a simplified evaluation method that incorporates experimental measurements, such as noise sources and losses, into a semi‐empirical theoretical framework. This framework simulates the standard DS‐BB84 protocol to estimate Secure Key Rates (SKRs), offering an alternative approach on the evaluation of the practical implementation of QKD. Specifically, the authors examine the feasibility of QKD over a 2.2 km intra‐campus fibre link in coexistence scenarios, identifying optimal Wavelength‐Division Multiplexing allocations to minimise Raman noise, achieving an expected SKR of up to 300 bps. Additionally, the authors’ study extends to 40 m indoor and 100 m outdoor Free‐Space Optical (FSO) links using low‐cost components, where the authors recorded Quantum Bit Error Rate (QBER) values below 3.2%, allowing for possible SKRs up to 600 bps even in daylight operation. The converged fibre/FSO scenario demonstrated robust performance, with QBER values below 3.7% and an expected SKR of over 200 bps. Our research bridges the gap between high‐end and economical QKD solutions, providing valuable insights into the feasibility of QKD in everyday scenarios, especially within metropolitan fibre based and FSO links. By leveraging cost‐effective components and a simplified single photon exchange setup, the authors work paves the way for the effortless characterisation of deployed infrastructure, highlighting its potential in diverse settings and its accessibility for widespread implementation.

Current Free-Space Optical Quantum Key Distribution (FSO-QKD) systems are mainly focusing on the development of critical components needed towards the realization of satellite-based QKD, relying on bulky optical telescopes equipped with expensive optical systems. The cost and complexity of these systems hinder the establishment of a practical FSO-QKD infrastructure deployed as the wireless last-mile segment of Quantum Communication Infrastructure for applications in urban environments. In this work, we experimentally demonstrate successful transmission of polarization encoded qubits over 0.5 km free space metropolitan link with enhanced noise suppression for both nighttime and daylight operation. Βy deploying two low-cost, Single Mode Fiber-coupled, optical terminals along with a prototype quantum sender station operating in C-band, Quantum Bit Error Rate (QBER) values below 3.5% were achieved, with expected Secure Key Rates up to 1 kbps during nighttime. The FSO link was integrated with existing in-building fiber infrastructure, demonstrating stable operation and acceptable QBER values below 5.5%, even when coexisting with intense C-band light signals (> 10 mW) propagating alongside the photonic qubits. The field trial and its comprehensive verification paves the way for practical FSO-QKD in city-scale environments, enabling end users to share quantum keys over kilometer-scale wireless links between building rooftops in last-mile connectivity scenarios.

In the emerging era of 5G+/6G, flexibility and autonomous operation of Radio Access Networks (RANs) without strict bandwidth limitations or energy-waste trade-offs are actively being pursued to satisfy the immense capacity demands and time-varying nature of mobile networks. The current work reports the first field trial of a fully automated, Software Defined Network (SDN) controlled hybrid Fiber Wireless (FiWi) Free Space Optics (FSO)/millimeter-wave (mmWave) X-haul link with a record-high data-rate up to 100 Gb/s using real-time traffic. Specifically, the hybrid FiWi X-haul link relies on wavelength-tunable transmissions across an O-band FSO link or a C-band FiWi mmWave channel, being dynamically allocated and wavelength-routed by means of an all-passive O-band/C-band diplexer. A complete SDN algorithmic workflow that periodically polls the status of the wireless channel, triggering a fully automated handover to the optimum functional channel upon adverse weather conditions or channel outages is developed, relying exclusively on open-source and inter-operable SDN agent and network controller solutions. The hybrid link is initially evaluated at a cascaded transmission across a 1 km fiber and a 25 m-indoor wireless stages, achieving a periodic time-slotted operation with 25 $\mu$s beam-switching time, O/C-band crosstalk less than −30 dB and wide open eye diagrams with 6.8 dB Extinction Ratio (ER). Finally, the hybrid link is benchmarked in a 24-hour long, automated, zero-touch, outdoor setup with 1km fiber and 50 m wireless distance, providing robust rooftop-to-rooftop communication across two neighboring buildings with up to 100 Gb/s capacity, transporting real-time services and 4K-UHD video streaming with uninterrupted operation under both daylight and nighttime turbulent conditions with 5 Beaufort wind speed. The proposed real-time, automated hybrid FiWi FSO/mmWave link is the first to break the 10 Gb/s barrier of conventional edge networks, shaping a promising hardware-software X-haul solution towards survivable 5G+/6G RANs.