Following a decade of radical advances in the areas of integrated photonics and computing architectures, we discuss the use of optics in the current computing landscape attempting to redefine and refine their role based on the progress in both research fields. We present the current set of critical challenges faced by the computing industry and provide a thorough review of photonic Network-on-Chip (pNoC) architectures and experimental demonstrations, concluding to the main obstacles that still impede the materialization of these concepts. We propose the employment of optics in chip-to-chip (C2C) computing architectures rather than on-chip layouts toward reaping their benefits while avoiding technology limitations on the way to manycore set-ups. We identify multisocket boards as the most prominent application area and present recent advances in optically enabled multisocket boards, revealing successful 40 Gb/s transceiver and routing capabilities via integrated photonics. These results indicate the potential to bring energy consumption down by more than 60% compared to current QuickPath Interconnect (QPI) protocol, while turning multisocket architectures into a single-hop low-latency setup for even more than four interconnected sockets, which form currently the electronic baseline. We go one step further and demonstrate how optically-enabled eight-socket boards can be combined via a 256 × 256 Hipoλaos Optical Packet Switch into a powerful 256-node disaggregated system with less than 335 ns latency, forming a highly promising solution for the latency-critical rack-scale memory disaggregation era. Finally, we discuss the perspective for disintegrated computing via optical technologies as a mean to increase the number of synergized high-performance cores overcoming die area constraints, introducing also the concept of cache disintegration via the use of future off-die ultrafast optical cache memory chiplets.

We experimentally demonstrate a multiband intermediate frequency-over-fiber/mmWave (IFoF/mmWave) fiber/wireless mobile fronthaul link for gigabit capacity over the unlicensed V-band (57–64 GHz). Digital synthesis of the multiband radio waveforms is performed at the baseband unit using digital subcarrier multiplexing technique, whereas digital predistortion is exploited to cope with the analog IFoF channel impairments without any further baseband processing at the digital-free remote radio head. Commercial optoelectronic components and analog V-band radio and antenna equipment for 7-km fiber and 5-m wireless transmission are employed to successfully demonstrate both uplink and downlink connectivity. An aggregate capacity up to 24 Gb/s was demonstrated with a 6-band 1 Gbaud 16-QAM on a 7.2-GHz analog bandwidth over the combined fiber/wireless channel showing error vector magnitude (EVM) values below the 3GPP requirements (<12.5%) for 5G systems. Multiformat assignment on each subcarrier was also realized by using M-PSK and 16-QAM schemes to achieve 18-Gb/s connectivity for both uplink and downlink, while demonstrating flexible resource allocation capabilities. By replacing the stand-alone optical modulator with an InP-based externally modulated laser chip for the implementation of the IFoF transmitter, a 16-Gb/s aggregate capacity was showcased on a 7-km fiber link and 5-m wireless channel with a 4-band 16-QAM encoded at 1 Gbaud. Successful operation with robust EVM performance was demonstrated using also the 6-band scheme of 1 Gbaud QPSK bands.

Optical random access memories (RAMs) have been conceived as high-bandwidth alternatives of their electronic counterparts, raising expectations for ultra-fast operation that can resolve the ns-long electronic RAM access bottleneck. However, experimentally demonstrated optical RAMs have been limited to up to 5 GHz only, failing to validate the speed advantages over electronics. In this Letter, we demonstrate the first all-optical RAM cell that performs both Write and Read functionalities at 10 Gb/s, reporting on a 100% speed increase compared to state-of-the-art optical RAM demonstrations. To achieve this, the proposed RAM cell deploys a monolithically integrated InP optical Flip-Flop and a Semiconductor optical amplifier-Mach–Zehnder Interferometer (SOA-MZI) On/Off switch configured to operate as a strongly saturated differentially-biased access gate. Error-free operation is demonstrated at 10 Gb/s for both Write and Read operations with 6.2 dB and 0.4 dB power, respectively, achieving the fastest reported RAM cell functionalities.

In this paper, we demonstrate a novel RAM cell based only on three traveling waveguide semiconductor optical amplifier-cross gain modulation (SOA-XGM) switches. The RAM cell features wavelength diversity in the incoming bit signals and provides Read/Write operation capability with true random access exclusively in the optical domain. Two of the SOA-XGM switches are coupled together through an 70/30 coupler to form an asynchronous flip-flop, which serves as the memory unit. Random access to the memory unit is granted by a third SOA-ON/OFF switch and all three SOAs together form the proposed RAM cell. Proof-of-principle operation is experimentally demonstrated at 8 Mb/s using commercial fiber-pigtailed components. The distinctive simplicity of the proposed RAM cell architecture suggests reduced footprint. The proposed flip-flop layout holds all the credentials for reaching multi-Gb/s operational speeds, if photonic integration technologies are employed to obtain wavelength-scale waveguides and ultrashort coupling lengths. This is numerically confirmed for 10 Gb/s using a simulation model based on the transfer matrix method and a wideband steady-state material gain coefficient.

The current work presents the first experimental demonstration of real-time Ethernet (ETH) trial services and 4K-Ultra High Definition (UHD) video application transmission over a 2λ Wavelength Division Multiplexing (WDM) analog Fiber-Wireless (FiWi) mmWave X-haul network, supporting dynamic flexible capacity allocation through an integrated silicon photonic Si ₃ N ₄ Reconfigurable Optical Add Drop Multiplexer (ROADM) and 60 GHz wireless transmission across a 7 m V-band link distance, while controlled by a Software Defined Network (SDN) controller based on Open Daylight. Analog X-haul transport of the radio signals is based on an Intermediate Frequency over Fiber (IFoF) scheme centered at 1.5 GHz using an Orthogonal Frequency Division Multiplexing (OFDM) radio-waveform with a bandwidth of 204 MHz, generated by a Field Programmable Gated Array (FPGA)-based RF System-on-Chip (SoC) processor that converts on-the-fly the real-time ETH downlink traffic to analog radio and vice-versa for the uplink. Dynamic allocation of the X-haul traffic capacity is handled through the use of the 802.1Q Virtual Local Area Network (VLAN) tag-mechanism, which controls the forwarding operation to the proper DAC and InP EML for optical modulation using Intensity Modulation/Direct Detection (IM/DD) schemes, while the wavelength routing operation is handled by the low-loss four-port Si ₃ N ₄ ROADM featuring only 2.5 dB fiber-to-fiber losses based on a cascaded MZI-interleaver design on the TriPleX platform, routing the real-time traffic to a second mmWave antenna site. Detailed measurements and traffic statistics indicate end-to-end latency of less than 260 μs and a packet loss less than 0.0054% across a dynamic range of at least 6.5 dB in the optical domain, while the high user bandwidth and signal quality are validated by an uninterrupted 4K-UHD video transmission across the FiWi X-haul mmWave transport network. The current work aims to shape a complete technology roadmap for Point-to-Multipoint FiWi transport network architectures with high spectral efficiency X-haul transport for dense areas and 5G/6G hotspots of future mmWave Centralized Radio Access Networks (C-RANs).

We present a fixed mobile convergence topology for analog intermediate frequency over fiber (A-IFoF)/millimeter-wave (mmWave) transmission, benefiting from the reuse of the deployed passive optical network (PON) infrastructure, towards future mobile fronthaul architectures. Powerful fully programmable gate array boards located inside the access nodes convert the Ethernet-based traffic to orthogonal frequency-division multiplexing (OFDM)-modulated intermediate frequency (IF) waveforms, supporting the A-IFoF propagation through the optical legacy infrastructure. Coexistence of the 5G traffic with the residential legacy traffic for the field propagation is achieved through utilization of unused C-band channels and wavelength-division multiplexing. To this extent, we experimentally demonstrate the downlink operation of a converged A-IFoF/mmWave link, over Telecom Italia’s legacy infrastructure located at Turin. Four-quadrature amplitude modulation (QAM)-OFDM and 16QAM-OFDM IF signals with ∼ 200 M H z and 400 MHz bandwidth [considered within the 3rd Generation Partnership Project (3GPP) New Radio specifications] were generated through a radio frequency system-on-chip platform and optically multiplexed with the legacy fiber-to-the-home services. After propagation to the field, the A-IFoF stream was directly fed to a directional wireless link operating at 60 GHz. Successful PON/over-the-air transmission with error vector magnitude (EVM) values well below the 3GPP ( < 12.5 % ) requirements for 5G New Radio was demonstrated, with a 10.5% EVM for 16QAM-OFDM modulated with 400 MHz bandwidth.