Li Gang Qu

Prof. Li Gang Qu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJing Li
Jing Li
MWMinghai Wang
Minghai Wang
LQLi Gang Qu
Li Gang Qu
GLGuangming LV
Guangming LV
According to the requirements for the rapid scanning and measurement of the geometric shape during the process of chemical milling of an aviation engine casing, the scanning path of the casing is planned and studied. This paper introduces the principle and method of the tracking scanner and automatic measuring system and analyzes the scanning area range, approach distance, and wide angle of the field. The casing process is modeled by applying part of the machine, obtaining a series of scanning path point and synthesizing the scanning trajectory. On this basis, the entire scanning process is divided into two alternating actions: scanning measurement and posture adjustment, and the mathematical model of the annular scanning path on the outer surface of the casing part is obtained. Adjusting the scan height was used to solve the repeated scan area problem, and the results show that the adjustment method effectively shortened the scan path’s length and time. The simulation method verifies the planned finite ring-scanning path, which verifies the correctness and feasibility of the mathematical model. Through the automatic scanning reconstruction process test, the reconstruction rate of the ring scanning trajectory reaches 85%, which is 80% higher than the manual detection efficiency.

23 July 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJing Li
Jing Li
PSPengfei Su
Pengfei Su
LQLi Gang Qu
Li Gang Qu
GLGuangming LV
Guangming LV
WQWenhui Qian
Wenhui Qian
To address the technical bottlenecks of low path planning efficiency and insufficient point cloud coverage in the automated 3D scanning of complex structural components, this study proposes an offline method for the generation and optimization of scanning paths based on CAD models. Discrete sampling of the model’s surface is achieved through the construction of an oriented bounding box (OBB) and a linear object–triangular mesh intersection algorithm, thereby obtaining a discrete point set of the model. Incorporating a standard vector analysis of the discrete points and the kinematic constraints of the scanning system, a scanner pose parameter calculation model is established. An improved nearest neighbor search algorithm is employed to generate a globally optimized scanning path, and an adaptive B-spline interpolation algorithm is applied to path smoothing. A joint MATLAB (R2023b)—RobotStudio (6.08) simulation platform is developed to facilitate the entire process, from model pre-processing and path planning to path verification. The experimental results demonstrate that compared with the traditional manual teaching methods, the proposed approach achieves a 25.4% improvement in scanning efficiency and an 18.6% increase in point cloud coverage when measuring typical complex structural components. This study offers an intelligent solution for the efficient and accurate measurement of large-scale complex parts and holds significant potential for broad engineering applications.

25 June 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJing Li
Jing Li
YWYang Wang
Yang Wang
LQLi Gang Qu
Li Gang Qu
MWMinghai Wang
Minghai Wang
GLGuangming LV
Guangming LV
PSPengfei Su
Pengfei Su
The aim of manufacturing large aerospace parts for the three-dimensional scanning field demands high precision and efficiency. However, it may be more challenging to meet the full coverage of the measurement problems for large aerospace parts with the scanning range of traditional three-dimensional scanning methods. This paper establishes a dynamic posturing scanning measurement system for large aerospace parts with a six-degree-of-freedom posturing platform and a six-degree-of-freedom industrial robot linkage. It establishes a mathematical model of dynamic three-dimensional scanning posturing. It proposes a platform attitude adjustment strategy based on the field of view angle of a 3D scanner during the adjustment of a six-degree-of-freedom platform. The dynamic scanning path planning is carried out using the three-dimensional spatial decomposition method, and the vector coordinates of the critical points at the edges of the missing areas of the scan are used to re-scan the missing areas to establish the dynamic scanning paths of large aerospace parts. It is experimentally verified that the system can realize the dynamic scanning of complex curved large aerospace parts. The experimental results show that the measurement efficiency is improved by more than 75%, and the point cloud coverage of the scanning reconstruction is improved by 18% for large aerospace components with complex surfaces.

17 December 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
GLGuangming LV
Guangming LV
XLXian Luo
Xian Luo
LQLi Gang Qu
Li Gang Qu
JLJing Li
Jing Li
CLChang Liu
Chang Liu
XZXuan Zhang
Xuan Zhang
During the hammer riveting of aircraft composite wing trailing edges, issues such as unclear damage mechanisms resulting from the continuous impact loading of composite materials, difficulty ensuring connection strength, and issues with damage control remain unresolved. This study investigates the dynamic impact load transfer mechanism during hammer riveting, establishes a model which maps the correlation between impact loads and rivet plastic flow, and develops a composite material VUMAT subroutine (a user-defined material subroutine in Abaqus/Explicit) based on the 3D Hashin failure criterion. A progressive damage simulation model for composite materials subjected to multiple hammer riveting operations is constructed. Based on mechanical analysis, a double-sided countersunk rivet with a support structure is proposed to suppress damage during composite hammer riveting. Simulation and experimental analysis demonstrate that, compared to conventional rivets, the new rivet effectively reduces contact stress (by up to 32.29%). Damage zones are concentrated at the straight hole and at the junction between the straight and countersunk holes. Furthermore, damage modes are simplified to matrix compression and tensile stress, with their respective proportions decreasing by 16.7% and 25.9%.

4 July 2025 in Coatings
Verified
Journal Article
Open access
PDF file
GLGuangming LV
Guangming LV
ZWZhiyuan Wang
Zhiyuan Wang
LQLi Gang Qu
Li Gang Qu
JLJing Li
Jing Li
CLChang Liu
Chang Liu
Aiming at the engineering problems of the severe wear and limited service life of mandrels during the hole extrusion strengthening of critical aerospace components, this study proposes a surface modification strategy for mandrels based on the anti-friction mechanism of micro-textures. Based on the Lame stress equation and the Mises yield criterion, a plastic strengthening stress distribution model of the hole wall was developed. Integrating Bowden’s adhesive friction theory, a parameterized numerical model was constructed to investigate the influence of micro-texture morphology on interfacial friction and wear behavior. An elastic–plastic contact model for micro-textured mandrels during hole extrusion strengthening was established using ANSYS. The effects of key parameters such as the micro-texture depth and area ratio on the contact pressure field, friction stress distribution, and strengthening performance were quantitatively analyzed. The results show that a circular micro-texture with a depth of 50 μm and an area ratio of 20% can reduce the fluctuation and peak value of the contact pressure by 41.0% and 29.7%, respectively, and decrease the average friction stress by 8.1%. The interfacial wear resistance and the uniformity of the residual compressive stress distribution on the hole wall are significantly enhanced, providing tribological insight and surface optimization guidance for improving the anti-wear performance and extending the service life of mandrels.

8 July 2025 in Machines
Verified
Journal Article
Open access
PDF file
JLJing Li
Jing Li
YWYang Wang
Yang Wang
LQLi Gang Qu
Li Gang Qu
GLGuangming LV
Guangming LV
ZCZhenyu Cao
Zhenyu Cao
Aiming at the problems of visual occlusion, reduced positioning accuracy and pose loss in the dynamic scanning process of aviation large components, this paper proposes a binocular vision dynamic positioning method based on magnetic target. This method detects the spatial coordinates of the magnetic target in real time through the binocular camera, extracts the target center to construct a unified reference system of the measurement platform, and uses MATLAB simulation to analyze the influence of different target layouts on the scanning stability and positioning accuracy. On this basis, a dual-objective optimization model with the objectives of ‘minimizing the number of targets’ and ‘spatial distribution uniformity’ is established, and Monte Carlo simulation is used to evaluate the robustness under Gaussian noise and random frame loss interference. The experimental results on the C-Track optical tracking platform show that the optimized magnetic target layout reduces the rotation error of the dynamic scanning from 0.055° to 0.035°, the translation error from 0.31 mm to 0.162 mm, and the scanning efficiency is increased by 33%, which significantly improves the positioning accuracy and tracking stability of the system under complex working conditions. This method provides an effective solution for high-precision dynamic measurement of aviation large components.