Lithium iron phosphate (LiFePO4, LFP) serves as a crucial active material in Li‐ion batteries due to its excellent cycle life, safety, eco‐friendliness, and high‐rate performance. Nonetheless, debates persist regarding the atomic‐level mechanisms underlying the electrochemical lithium insertion/extraction process and associated phase transitions. A profound clarity on the fundamental lithium storage mechanisms within LFP is achieved through meticulous scanning transmission electron microscopy (STEM) and selected area electron diffraction (SAED) imaging. This study shows systematical tracking of lithium ions within their respective channels and unveils the phase distribution within individual LFP crystallites not only quantitatively but also at unprecedented atomic‐level resolution. Incontrovertible evidence of the co‐existence of segregated yet only partially lithiated LixFePO4 regions in electrochemically delithiated LFP crystals are provided using correlative electron microscopic methods and data analysis. Remarkably, by directly tracing ion transport within lithium channels a diffusion coefficient range (10−13–10−15 cm2s−1) for correlated lithium ion motion in LFP is estimated and Funke's ion transport jump relaxation model is validated experimentally for the first time. These findings significantly advance the understanding of olivine‐type materials, offering invaluable insights for designing superior battery materials.
Thermomechanical treatments of age-hardenable wrought aluminium alloys provoke microstructural changes that involve the movement, arrangement, and annihilation of dislocations, the movement of boundaries, and the formation or dissolution of phases. Cold and hot compression tests are carried out using a Gleeble® 3800 machine to produce flow data as well as deformed samples for metallography. Electron backscattered diffraction and light optical microscopy were used to characterise the microstructure after plastic deformation and heat treatments. Models based on dislocation densities are developed to describe strain hardening, dynamic recovery, and static recrystallisation. The models can describe both the flow and the microstructure evolutions at deformations from room temperatures to 450 °C. The static recrystallisation and static recovery phenomena are modelled as a continuation of the deformation model. The recrystallisation model accounts also for the effect of the intermetallic particles in the movements of boundaries.