Biochar is produced from a wide range of organic materials by pyrolysis, specifically for improvement of poor quality soils. One of the main issues nowadays in studying biochar as soil amendment is to upscale experiments and move from short-term, laboratory conditions to long-term field trials. This paper presents a long-term field study, being the final step of a scale-up technology development, on grain husk and paper fibre sludge biochar application for soil improvement with focus on two degraded soil types of a temperate region. The effects of biochar on an acidic and a calcareous sandy agricultural soil were studied applying a complex approach including physico-chemical, biological and ecotoxicological methods. Our study demonstrated that the applied biochar had positive direct and indirect influences on the acidic sandy soil, but these effects were different in terms of extent and time. 30 t/ha biochar addition improved the pH of the acidic sandy soil by 24% and also increased significantly the nutrient concentrations (P2O5 by 68%, K2O by 11% and organic matter by 33%), and the water-holding capacity after 30 months. Furthermore, biochar addition improved also the microbiological activity and diversity in the acidic sandy soil. Biochar application did not induce any negative effects. Biochar had no toxic effect on the plants and the biochar-treated soil provided a more liveable habitat for soil living animals than the untreated acidic sandy soil. The favourable biochar-mediated influences on soil properties were manifested mainly in the acidic sandy soil, proving that the biochar-related advantages have to be verified for different soil types. The benefits of grain husk and paper fibre sludge biochar application in an acidic sandy soil were confirmed on the long term by the applied tiered approach.
Continuous crystallization in the presence of polymer additives is a promising method to omit some drug formulation steps by improving the technological and also pharmacological properties of crystalline active ingredients. Accordingly, this study focuses on developing an additive-assisted continuous crystallization process using polyvinylpyrrolidone in a connected ultrasonicated plug flow crystallizer and an overflow mixed suspension mixed product removal (MSMPR) crystallizer system. We aimed to improve the flowability characteristics of small, columnar primary plug flow crystallizer-produced acetylsalicylic acid crystals as a model drug by promoting their agglomeration in MSMPR crystallizer with polyvinylpyrrolidone. The impact of the cooling antisolvent crystallization process parameters (temperature, polymer amount, total flow rate) on product quality and quantity was investigated. Finally, a spatially segmented antisolvent dosing method was also evaluated. The developed technology enabled the manufacture of purified, constant quality products in a short startup period, even with an 85% yield. We found that a higher polymer amount (7.5-14%) could facilitate agglomeration resulting in "good" flowability without altering the favorable dissolution characteristics of the primary particles.
Additive-controlled crystallization is a promising method to improve crystal morphology and produce solid drug particles with the desired technological and pharmacological properties. However, its adaptation to continuous operation is a hardly researched area. Accordingly, in this work, we aimed to come up with a methodology that provides the systematic and fast development of a continuous three-stage MSMPR cascade crystallizer. For that, a cooling crystallization of famotidine (FMT) from water, in the presence of a formulation additive, poly(vinylpyrrolidone) (PVP-K12), was developed. Process parameters with a significant impact on product quality and quantity were examined in batch mode through a 24-1 fractional factorial design for the implementation of additive-controlled continuous crystallization. These batch experiments represented one residence time of the continuous system. Based on the statistical analysis, the residence time (RT) had the highest effect on yield, while the polymer amount was critical from the product polymorphism, crystal size, and flowability points of view. The values of critical process parameters in continuous operation were fixed according to the batch results. Two continuous cooling crystallization experiments were carried out, one with 1.25 w/wFMT% PVP-K12 and one with no additive. A mixture of FMT polymorphs (Form A and Form B) crystallized without the additive through five residence times (>6.5 h) with 70.8% overall yield. On the other hand, the additive-controlled continuous experiment resulted pure and homogeneous Form A product with excellent flowability. The system could be operated for >6.5 h without clogging with a 71.1% overall yield and a 4-fold improvement in productivity compared to its batch equivalent.
1 January 2018 in Periodica Polytechnica Chemical Engineering
Analytical data of 260 sensory evaluated wine samples have been statistically examined. All samples had been classified by at least one taster of the five member jury as having "Brett character". Wines have been finally judged as "Good", having "Other defects" or "Brett character". 4-etylphenol (4-EP) and 4-ethylguaiacol (4-EG) concentrations showed different distributions for the "Brett character" group while the other two groups could not be distinguished from each-other. Threshold concentrations for 4-EP, 4-EG and their sum (4-EP + 4-EG) were calculated to classify wine samples as "non-Brett" and "Brett character". 4-EP concentrations were found to be the most reliable markers, with a 245 mu g/l lower and 968 mu g/l upper threshold. Below or above this range a sample can reliably be classified as "non-Brett" and "Brett character" respectively, while within this range only sensory evaluation can distinguish the two characteristics. Other tested classical analytical parameters did not show significant differences between these groups except for SO2 which was found to be lower in the "Brett character" group, stressing the importance of sulpihiting as a tool in the fight against Brettanomyces.