Testing the shielding effectiveness of materials is a key step for many applications, from the industrial to the biomedical field. This task is very relevant for high-sensitivity sensors, whose performance can be greatly affected by electromagnetic fields. However, the available testing procedures often require expensive, bulky, and heavy measurement chambers. In this paper, a cost-effective and reliable measurement procedure for testing the shielding effectiveness of materials is proposed. It exploits a lab-scale anechoic shielded chamber, which is lightweight, compact, and cost-effective if compared to the available commercial solutions. The measurement procedure employs a vector network analyzer to allow an accurate and fast characterization setup. The chamber realization phases and the measurement procedure are described. The shielding capability of the chamber is measured up to 26 GHz, whereas the performance of commercial shielding coatings is tested to demonstrate the measurement’s effectiveness.
This article examines the feasibility of measuring the three-dimensional (3D) displacement of moving targets using a distributed network of three 24 GHz Doppler radars positioned along orthogonal axes. Though radar sensors offer advantages over optical sensors in terms of cost and privacy, conventional phase-based estimation fails during stationary periods or with multi-component targets. To address these issues, this work proposes a displacement detection method based on an ad-hoc experimental setup and the micro-Doppler signature. A curve extraction algorithm isolates the different body parts, which are then integrated over time to determine displacement. The proposed method is validated through both simulation and measurements and supported by a stereophotogrammetric system as ground truth. The system's effectiveness was further demonstrated through a proof-of-concept human walking trial, proving that micro-Doppler analysis can overcome the limitations of classical phase-based methods in biomechanical applications.
1 January 2026 in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology