This study aimed to create a unique WPI film formulation that would help maintain strawberry quality. Therefore, an edible coating from WPI was developed, and its physical, mechanical, and rheological characteristics were analysed. WPI is a biopolymer residue with attractive barrier characteristics, biodegradability, and neutral taste that can be used as an edible coating on fragile fruits such as strawberries. Key innovations from this research include a comprehensive evaluation of whey as the sole polymeric component in edible coatings for strawberries, assessing its standalone protective potential; improvement of film formulation based on whey proportion; and an inferred shelf-life extension of whey-coated strawberries aligned with commercial acceptability standards, bridging the gap between research and practical application. This study showed that increasing protein proportion reduced the film’s solubility from 47.6% to 22.4%, thus enhancing its water resistance by up to 2-fold. Still, the film became tensile stiffer and more elastic modulus at 50% RH than at 70% RH. The filmogenic solution’s viscosity enhanced from 2.25 at 25 °C to 4.19 Pa.sn at 4 °C, indicating homogeneous coating of the fruit surface at room temperature and its adhesion at storage temperature. During cold storage, WPI coating reduced the mass loss of strawberries from a range of 5.83–16.71% in the control to a range of 2.56–13.22%, thus decreasing the mass loss by up to 2-fold compared to uncoated fruit from the control treatment, which resulted in better visual quality and a 33% extension of the shelf life of commercial strawberries. Overall, WPI films and coatings have the potential to offer a sustainable and effective protective layer for highly perishable and delicate fruits, extending shelf life and, consequently, reducing waste. Together, these properties can revolutionise the fresh produce industry to enhance global supply chain efficiency.

The aim of this work was to evaluate the dough rheological properties along with the textural, physical, colorimetric, structural, total phenolics, anthocyanins and antioxidant properties of breads composed of wheat and Peruvian INIA 601 purple corn flour at three levels of substitution (5%, 15%, and 25%). Paste profiles describe the gelatinization, swelling, and decomposition phenomena of starch-based systems. These profiles were strongly affected at 15% and 25% replacement levels of purple corn INIA 601, attributed to the presence of phenolic compounds, which retarded starch gelatinization by increasing energy demands to reach paste temperature. Farinographic analysis evaluates key quality properties of the dough and provides insight into its rheological behaviour. In them, 5% purple corn flour substitution had a gluten-enhancing effect that increased the dough consistency, given the reducing capacity of the polyphenols that caused the aggregation of gluten proteins. But at levels of 15% and 25% it affected dough stability and tolerance properties (p < .05). In the rheometry properties, the addition of purple corn increased the elastic (G′) and viscous (G″) modulus. However, the hardness as the most important textural parameter of breadcrumbs was not affected up to 15% purple corn incorporation levels (p < .05). Multivariate, heatmap, and correlation analyses identify patterns and relationships, offering insights into variable interactions. Correlation studies showed interesting associations (0.90 > r > 0.99) between the bread responses. In conclusion, the incorporation of INIA 601 purple corn can generate anthocyanin-rich pigmented breads with higher concentration of phenolic compounds, anthocyanins and antioxidant capacity, which showed physical characteristics like wheat without drastically affecting crumb cell structure and bread volume.

In order to obtain a highly nutritious extrudate, a combination of pseudocereals, vegetable protein, and banana flour, a fruit with high sensory acceptability, was used. The objective of the research was to produce a multi-component extrudate (ME) based on cañihua and quinoa with the addition of pea protein isolate and banana flour. The response variables evaluated were composition, expansion, hydration, colour, and hardness properties, as well as the microscopy and sensory characteristics of the flakes produced. These flakes were compared with three commercial extrudates, commercial quinoa-based extrudate (QE), commercial corn-based extrudate (CE), and commercial wheat-based extrudate (WE), which had similar characteristics. The ME showed a higher protein content compared to commercial extrudates (13.60%), and it had significant amounts of lipids, fibre, and ash. The expansion of the ME was like commercial quinoa but significantly lower than the CE and the WE in terms of expansion (p < 0.05). Regarding the absorption and solubility indices of the ME, these indicated that it had lower starch fragmentation compared to the commercial CE and WE. In addition, the instrumental hardness of the ME was higher than the commercial ones due to the complex nature of the product. Through scanning electron microscopy (SEM), it was observed that the ME showed some remaining extrusion-resistant starch granules from quinoa and cañihua with the presence of protein bodies. Finally, the flash profile described the ME as having a pronounced flavour, higher hardness, and lower sweetness, and the free sorting task allowed it to be differentiated from commercial extrudates based on its natural appearance and chocolate flavour.

Considering the potential of biopolymers from underutilized Andean sources in Peru to improve the characteristics of edible films, this work aimed to evaluate the formation of a polymeric matrix composed of Nostoc and modified potato starch for the formulation of edible films for food coating. The effects of polymer matrix ratio and drying temperature on films obtained by thermoforming were studied, determining the water vapor permeability and mechanical properties using a multifactorial design. Additionally, thermal properties were characterized by TGA and DSC, and structural properties by FT-IR and scanning electron microscopy. The results showed that the films exhibited lower solubility, lighter hues, better water vapor resistance, higher tensile strength, and improved thermal stability with increasing modified starch content. The formulation with higher Nostoc content exhibited a more homogeneous surface according to microscopy images, and no new chemical bonds were formed by adding modified starch and Nostoc to the polymer matrix, according to FT-IR spectra. These findings are promising and suggest using Nostoc for elaborating edible films composed of native and modified starch from native Andean potatoes as bio-based materials with potential application in the food industry.