The main objective of this study was to optimize the extraction of dietary fiber (insoluble dietary fiber and soluble dietary fiber) and degree of esterification from yellow dragon fruit peels using ultrasound-assisted extraction. Additionally, the study aimed to investigate the potential application of this fiber as a fat replacement in alpaca-based sausages. The optimization process for extracting dietary fiber and degree of esterification involved considering various factors, including the liquid-to-solid ratio, pause time, and total ultrasound application time. A Box–Behnken design consisting of 15 treatments was employed to determine the optimal levels for ultrasound-assisted extraction. The optimized conditions were found to be a liquid-to-solid ratio = 30 mL/g, pause time = 1 s, and total ultrasound application time = 60 min, which resulted in the highest values of insoluble dietary fiber (61.3%), soluble dietary fiber (10.8%), and the lowest value of degree of esterification (39.7%). The predicted values were validated against experimental data and showed no significant differences (p > 0.05). Furthermore, a completely randomized design was utilized to assess the effect of dietary fiber on replacing fat content during the production of alpaca-based sausages. The findings revealed that up to 78% of the fat content could be successfully replaced by soluble dietary fiber obtained from yellow dragon fruit peels when compared to high-fat sausages. Additionally, experimental sausages using soluble dietary fiber showed similar (p > 0.05) quality characteristics, such as hardness (24.2 N), chewiness (11.8 N), springiness (0.900), cohesiveness (0.543), redness (a* = 17.4), and chroma values (20.0), as low-fat commercial sausages.

This research aimed to assess the influence of red dragon fruit peels ratio (RDF-PR) from two species, Hylocereus hybridum (HH) and Hylocereus undatus (HU), and particle size (PS) on quality parameters of red dragon fruit peel powder (RDF-PP) and its further application in emulsified alpaca-based sausages as partial substitutes of pork-back fat. A three-level full factorial design (nine treatments) was employed to evaluate the effect of RDF-PR (HH(0%):HU(100%), HH(50%):HU(50%), and HH(100%):HU(0%)) and PS (499–297, 296–177, and <177 µm) on the dependent variables: L*, a*, b*, C, h°, water-holding capacity, oil-holding capacity, swelling capacity, pectin yield, degree of esterification (analysed through FT-IR), and crude fibre content. The data analysed through a response surface methodology showed that treatment one (T1) is the best with the optimised conditions at 100% HU RDF-PR and PS of <177 µm. The statistical validation of T1 exhibited the highest water-holding capacity (32.1 g/g peel), oil-holding capacity (2.20 g oil/g peel), and pectin yield (27.1%). A completely randomised design (four formulations) was then used to assess the effect of partial replacement of pork-back fat by T1 in emulsified alpaca-based sausages on the colourimetric, physicochemical, and texture properties (hardness, chewiness, cohesiveness, springiness, adhesiveness, and adhesive force). Likewise, a sensory hedonic scale was employed to evaluate the appearance, colour, odour, flavour, texture, and overall acceptability of sausages. The results revealed that 65.7% of pork-back fat content was successfully replaced compared with a control formulation. Additionally, F3 showed significantly (p < 0.05) better colourimetric, physicochemical, and textural characteristics, such as lower hardness (34.8 N) and chewiness (21.7 N) and higher redness (a* = 19.3) and C (22.9), compared to a control formulation. This research presents RDF-PP as a promising fat substitute for developing healthier, reduced-fat meat products using fibre-rich agroindustry by-products.

In order to obtain a highly nutritious extrudate, a combination of pseudocereals, vegetable protein, and banana flour, a fruit with high sensory acceptability, was used. The objective of the research was to produce a multi-component extrudate (ME) based on cañihua and quinoa with the addition of pea protein isolate and banana flour. The response variables evaluated were composition, expansion, hydration, colour, and hardness properties, as well as the microscopy and sensory characteristics of the flakes produced. These flakes were compared with three commercial extrudates, commercial quinoa-based extrudate (QE), commercial corn-based extrudate (CE), and commercial wheat-based extrudate (WE), which had similar characteristics. The ME showed a higher protein content compared to commercial extrudates (13.60%), and it had significant amounts of lipids, fibre, and ash. The expansion of the ME was like commercial quinoa but significantly lower than the CE and the WE in terms of expansion (p < 0.05). Regarding the absorption and solubility indices of the ME, these indicated that it had lower starch fragmentation compared to the commercial CE and WE. In addition, the instrumental hardness of the ME was higher than the commercial ones due to the complex nature of the product. Through scanning electron microscopy (SEM), it was observed that the ME showed some remaining extrusion-resistant starch granules from quinoa and cañihua with the presence of protein bodies. Finally, the flash profile described the ME as having a pronounced flavour, higher hardness, and lower sweetness, and the free sorting task allowed it to be differentiated from commercial extrudates based on its natural appearance and chocolate flavour.

The aim of the present research was to determine if the developed ovo−vegetarian sausage (SO), which was made with 15% chickpea flour, 51% albumin and 34% soy protein concentrate, exhibited improved physicochemical and sensory characteristics compared to vegetarian sausages available on the local market (classic vegan sausage, SC; vegan fine herb sausage, SH; and quinoa sausage, SQ). According to the physicochemical results, the developed sample, SO, presented significant differences (p < 0.05) compared to the others, including higher protein content, lower pH and a higher a* value. Three types of sensory analyses were conducted—flash profile, overall liking and purchase intention (to determine consumers’ willingness to purchase the product)—with the first involving 15 consumers and the second and third involving 60 participants each. Descriptors for each sample were determined using the vocabulary provided by consumers in the flash profile analysis. Descriptors for SO included ‘elastic’, ‘smell of cooked corn’, ‘characteristic flavor’, ‘pasty’, ‘soft’ and ‘pastel color’, contributing to its greater overall liking and purchase intention compared to the others. Through the hierarchical multiple factor analysis, a positive correlation was observed between the texture and sensory descriptors of the flash profile. Conversely, a correlation was found between the physicochemical characteristics (pH, a_w, color) and overall liking and purchase intention.

This research aimed to assess the influence of red dragon fruit peels ratio (RDF-PR) from two species, Hylocereus hybridum (HH) and Hylocereus undatus (HU), and particle size (PS) on quality parameters of red dragon fruit peel powder (RDF-PP), and its further application in emulsified alpaca-based sausages as partial substitutes of pork-back fat. A three-level full factorial design (nine treatments) was employed to evaluate the effect of: (i) RDF-PR [HH(0%):HU(100%), HH(50%):HU(50%), and HH(100%):HU(0%)] and (ii) PS (499–297, 296–177, and <177 µm) on the dependent variables: L*, a*, b*, C, h°, water-holding capacity, oil-holding capacity, swelling capacity, pectin yield, degree of esterification (analysed through FT-IR), and crude fibre content. The data analysed through a response surface methodology showed that treatment one (T1) is the best with the optimised conditions at 100% HU RDF-PR and PS of <177 µm. The statistical validation of T1 exhibited the highest water holding capacity (32.1 g H2O/g peel), oil holding capacity (2.20 g oil/g peel), and pectin yield (27.1%). A completely randomised design (four formulations) was then used to assess the effect of partial replacement of pork-back fat by T1 in emulsified alpaca-based sausages. The results revealed that 65.7% of pork-back fat content was successfully replaced as compared with a control formulation.